Paloma Japanese instant geyser solutions for all problems in one video

Sdílet
Vložit
  • čas přidán 15. 01. 2024
  • Paloma Japanese instant geyser solutions for all problems in one video.
    Method:
    To replace the water wall curtain on your Japanese Pluma instant geyser, follow these steps:
    1. Turn off the geyser: Ensure the geyser is completely turned off and disconnected from the power source to avoid any electrical hazards.
    2. Remove the front panel: Typically, water heaters have a front panel that can be easily removed. Use a screwdriver to carefully unscrew and detach the panel.
    3. Locate the water wall curtain: Once the front panel is removed, locate the water wall curtain. It is usually positioned near the burner assembly.
    4. Detach the old water wall curtain: Carefully disconnect the old water wall curtain from its position. Be mindful of any clips or screws holding it in place.
    5. Clean the area: Before installing the new curtain, clean the surrounding area to remove any debris, dust, or sediment.
    6. Install the new water wall curtain: Position the new water wall curtain in the same location where the old one was. Ensure it is securely attached, using any clips or screws provided.
    7. Reattach the front panel: Put the front panel back in place and securely fasten it with the screws.
    8. Turn on the geyser: Once the replacement is complete, turn the geyser back on and check for any leaks or irregularities.
    Remember to consult the manufacturer's manual for specific instructions related to your Japanese Pluma instant geyser model. If you're unsure or uncomfortable with the process, it's advisable to seek professional assistance.
    #paloma
    #instantgeyser
    #howtomake
    #preparation
    #repair
    #curtains
    ​⁠‪@tahirmughaltechnical1177‬ ​⁠‪@randomitemsrestoration‬ ​⁠‪@TechKnowledge64‬ ​⁠‪@miantechnicalguru‬ ​⁠‪@halimtvone‬
  • Věda a technologie

Komentáře • 7