Bootrec Fixboot Access is Denied Windows 10 and Windows 11 with Blue Screen Boot Loop
Vložit
- čas přidán 23. 08. 2024
- This video will show you how to fix “the access is denied” when executing bootrec /fixboot
in windows 10 command prompt (CMD).
(Best tool to fix Windows boot problems: bit.ly/394PgxC)
5 Methods to Fix Bootrec /Fixboot Access Is Denied → bit.ly/49432dM
This problem may happen when you try to fix windows 10 and windows 11 boot loop with blue screen error message: INACCESSIBLE_BOOT_DEVICE. And/or with error code: 0xc0000225. Especially if you have an EFI or UEFI SSD disk format or when replacing HDD by SSD Disk drive.
IMPORTANT: SEE HOW TO IDENTIFY THE EFI OR BOOT PARTITION CORRECTLY:
• How to Identify EFI or...
This command is used to fix blue screen boot problems in windows 7, windows 8 or Windows 10 with this error message:
Your PC ran into a problem and needs to restart. We're just collecting some error info, and then will restart for you. (100%)
Error message: INACCESSIBLE_BOOT_DEVICE.
Or BSOD with THIS error message: "Your PC/Device needs to be repaired"
Error code: 0xc0000225
To see how to fix INACCESSIBLE BOOT DEVICE due to windows update or apps installation, watch the this video:
• How to Fix Automatic R...
How to Create Boot Repair Disk to Automatically Fix Blue Screen Boot Loop & Windows 10 Start-up Failure:
• Create a USB Boot Repa...
How to Create Windows Installation media using your android mobile:
• How to Crate a Bootabl...
Used command lines:
bootrec.exe /rebuildbcd
bootrec.exe /fixmbr
bootrec.exe /fixboot
First method:
Type this command to fix “the access is denied”:
bootsect/nt60
Execute this command to fix windows boot issue:
bootrec /fixboot
Second method:
Especially for UEFI-based computers:
boot windows from installation media such as DVD or USB:
Select: Repair your computer = troubleshoot = Command Prompt:
Open desk manager:
Diskpart
Show available disks:
List disk.
Select boot drive:
Sel disk 0
Show available partitions:
List vol
Select the EFI Partition:
Sel vol 4
Assign the V letter to The EFI partition:
assign letter=V:
Open v partition:
Exit
V:
Format the EFI partition:
format V: /FS:FAT32
in windows 10 1709 and older:
MD \EFI\Microsoft\Boot
cd /d V:\EFI\Microsoft\Boot\
bootrec /FixBoot
bcdboot c:\Windows /l en-us /s V: /f All
in windows 10 1709 or newer (1803, 1809, 1903, 1909, 2004), …etc.:
bcdboot C:\windows /s V: /f UEFI
Bios Settings hotkeys:
Lenovo:
Desktop= F1, F2
Laptop= F1, F2 or Nano Button
Notebook= F2
Hp:
Desktop= F10, Esc
Generic= Esc, F10, F1
Laptop= F10
Notebook= Esc or F10
Tower= F1
Dell:
Desktop= F2
Laptop= F2
Asus:
Desktop= F9
Laptop= F2 or Delete
Notebook= F2
Acer:
Desktop= F2
Laptop= F2 or Del
Samsung:
Notebook= F2
Ultrabook= F2
Ultrabook Ative Book= F10
Sony:
Laptop= Assist Button, F1, F2, F3
Toshiba:
Laptop= F2
Protege, Satellite, Tecra= F1, Esc
Equium= F12
Compaq= F10
Fujitsu= F2
💥🔥 *NEW & AUTO METHOD TO FIX ALL BOOTREC, BCDBOOT ERRORS* :
czcams.com/video/YGEZF9y2I3w/video.html
IMPORTANT: SEE HOW TO IDENTIFY THE EFI OR BOOT PARTITION CORRECTLY:
czcams.com/video/tYUBiWO0P9o/video.html
5 Methods to Fix Bootrec /Fixboot Access Is Denied → bit.ly/49432dM
Q
@@dianaosler6589 What is that ?
i have to be honest, after I started the video, I taught that it's just a fake video based on the voice synth and visuals, but I decided to git it a go and the 1st option saved my PC, I've been struggling for almost a week. you have my respect. thank you sir!
LOL 😂🤣
Thank you too for your nice comment!
Don't forget to subscribe! ❤
I’ve watched 10 videos and continued to get denied results… I see Windows logo for first time in days thanx to you!!!! Thank you so very much!
You're welcome!
Great to hear!
You are my hero man! You saved me cause, after a wrong linux installation, my PC didn't want to turn on in any way, but with your tutorial I rescued it! Subscribed :)
Man, you've solved my problem. You have my eternal gratitude.
You are most welcome!
I was literally considering format my whole computer, I wish I can give you 1k likes. Thanks
Your subscription and like will considered as 2k likes.
Thank you for your amazing feedback.
Thanks a lot man ... It really helped me out .. the 1st method did the work.. and i was so freaked out when the error was constantly there "ACCESS IS DENIED" ... thank u so much man ..! That was the first time when i was doing something on my own with the boot manager i was removing my dual boot which my cousin brother installed for me ! Thanks a lot man
Thank you too for your motivating comment.🙂❤️
It will be great addition for our channel if you can subscribe to support us with such amazing feedback in the future.💞🙏🏼
@@ValiumMediaTech but man i was removing the grubx bootloader and it is still showing some error! 😭😭
@@shubhamrawat1999 What is the new error message or error code ?
@@ValiumMediaTech it's ohk man i got it ....! Thanks a lot man...!.... I'll still tell u the error ..! When i ran bootrec /scanos it showed Total Installation as 0 ....! Actually i was trying to get rid of the dual boot that i had so in order to that i had to get rid of the Grubx bootloader..,!
@@shubhamrawat1999 " bootrec /scanos" will show you only new OS that are not added to BCD.
Subbed! The 2nd fix actually worked !
Thank you so much for subscription!
Had this problem for months and you're the only one who fixed it. Thanks brother!
Thank you too for your nice feedback!
My maaaannnnn!!!!!!
You are awesome!!!!
I have been trying a lot of solutions and thought of trying this one too and bam!!!!!
My problem just gets solved...
Thanks a lot man!!!!!
Thank you very much for your feedback; 🙏🏼💞
Don't forget to subscribe if didn't do it previously. ❤️🙂
You literally saved my job by showing me this fix.
The MBR2GPT.exe did not worked and broked the HDD and it was showing as Invalid Drive because Dell has the most cancerous proprietary hardware.
Doing a clone and manually rebuilding the boot partition with your Method 2 fixed the problem.
Also, I can confirm that using your method also allow you to copy only the "Windows" partition into an other working Windows 10 on an other drive. Doing so, makes all the partitions with a good size and using the backup copy of the faulty OS into the new drive and made it possible by doing your Method 2 afterward.
I can't t thank you enough for this! Great work 🙂
You are most welcome!
I think you are the only man who deserve to be on CZcams
Thanks man 👍👍👍
You are most welcome bro;
Your feedback is amazing and motivating.
Keep it up.🙏🏼🙂❤️
Thank you! Finally fixed! Had been getting access denied with bootrec /fixboot, tried so many video different fixes. Your first one worked for me! Thank you so much!
You are welcome bro;
Don't forget to subscribe if you didn't do it before :)
Thanks in Advance.
ValiumMedia Tech will I lose any of my data if I reinstall windows from another usb drive?
@@logiknotlogic6586 UNLESS YOU DON'T SELECT "FORMAT" OPTION, you will lose all Installed applications, but your files in C: partition will be stored in folder called "Old windows" and will file that folder inside C: partition.
If you have other disks or partitions like D, E or whatever, no file will be lost from those partitions unless you do a Format for them during Installation.
@@logiknotlogic6586 If you need to keep all your files and installed applications and you have an access to your desktop, open the USB, ISO file or DVD of windows Installation and select upgrade option instead of fresh installation, but this option will not works if you boot from a USB or another Installation media.
@@ValiumMediaTech I just used the automatic system restore point created by windows luckily a few hours ago and it worked. Thx a lot though
I did the first method everything seemed to work in command prompt but it still didn't fix the issue
If you still have the issue, watch this video:
czcams.com/video/9Wz4dh1B5_Q/video.html
Same
Legend! This is the only procedure I've seen to work. In my case first method did the magic with the "bootsect/nt60 sys" extra command. I've checking dozens of procedures, manuals, etc. Nothing worked.
The boot was corrupted after a Windows Update (or maybe manufacturer Update), updates done automatically by windows without my request. We know win10/11 love to auto update without user requesting it and messing the system in the process...
Thank you too for your nice comment!
Great to hear!
Thanks bro i was stuck on grub one problem and I swear I'm tired of fixing it from watching videos and literally I've watched more than 40 videos including the main operations and the errors you've really helped me
Glad I could help you!
Don't forget to subscribe❤🌹
Thanks man the NTFS command worked magically !!!!🔥
Happy to help
did it wipe your data?
@@Anonymous-kg7yg See my answer to your previous question.
Fantastic. The Method 1 works perfectly for me . Thank you for making such a valuable video . Good Luck to you . Hope your channel achieve greater heights 🤝🤝🤝💯👍🙏😊
Thanks for this amazing feedback.♥️
You are welcomed to subscribed to our channel 🙂
@@ValiumMediaTech Done Subscribed . Good Luck Guys
@@eduscopestream Best regards.
Fuuuuuuuccccccccccckkkk! you're amazing. I was so worried and watched n number of videos of people but was stuck in that blue screen with two options (troubleshoot & Shut down). You the man!!!! Love Youuuuuu man!! You've got a new loyal subscriber!
You're welcome!!
This helped me so much. I thought I was going to need to reinstall windows, but this saved my pc. THANK YOU SO MUCH
You are welcome!
Don't forget to subscribe! ❤❤🌹
I'm really stuck non of methods is used to repair it command prompt doesn't show the path and reset is also not working I'm really worried
Watch this video:
czcams.com/video/9Wz4dh1B5_Q/video.html
Method 1 worked for me...Thanks brother💌
Thanks for feedback.
Same
@@23w53 Thanks for feedback.
This never allowed my access to use the command bootrec /fixboot. However, the commands you used fixed my PC. Thanks
You are welcome!
You solved my problem i was watching all the tutorial on youtube and goofle and nothing happen until i watch this tutorial and you make it in the simple way thank you so much
Thank you too for your nice feedbck!
BRUH YOU SAVED MY LIFE THANK YOU!
You earned a sub man thank u
You are welcome; and thanks for subscription :) :)
@@ValiumMediaTech ....i did same as u say but after continue option i clicked it shows only lenovo word and screen goes to black 😭😭
@@iloveallah7150 What is the screen that appear on the black screen ?
Mil gracias, me ayudaste a reparar el arranque.
Thanks so much, your video is great
Wow, thank you, sir! The second method finally fixed my problem.
Thank you 🙏
May God bless you.
Glad it helped!
Don't forget to subscribe! ❤❤🌹
Thanks dude you are just amezing i was so frustrated trying this since so long you made it easy really helpful video love you dude 😎 keep it up keep growing 💗
Actually some methods are just not working, the most effective way is to create the bootable disk and repair with Ao mei disk tool.
Ao mei?
Pc is not booting bro
How will I install that software
Brother i cannot thank you enough
You helped me in doing something no one could've
Thanks ❤️❤️
I love you so much I have tried for days to fix my pc your vid is the best man. Lot of love
I love you too for your nice reply.💞🙏🏼
Don't forget to subscribe if didn't do it previously. 🙂❤️
YES!!!!!!!!! WTFFFFFFF!!!!! BRO YOU.ARE.A.LIFE.SAVER. YESSSSSS😳😳😳🤯🤯🤯 BEACAUSE OF THAT YOU HAVE GAINED 1 SUBS
Thank you very much for your feedback 💞🙏🏼
And your subscription is welcomed 🙂❤️
Very useful guide!
Thank you very much, you resolve my "C:/Windows/System32/Logfiles/Str/StrTrail.txt" error on my work laptop!
Like, subscribe and saved this video to My Favorites!
Thank you very much for this amazing feedback 😌
And you are welcomed to be one of our best subscribers ♥️✋
which method?
@@vishalthakur7518 Try the first method and if not worked, try the second one.
If you need a help, don't hesitate to ask.
@@ValiumMediaTech fixboot error is fixed but still when i start my laptop it loads with a atomatic repair load screen and later shows that windows unable to fix the error, the same error which is mentioned in the comment. And now i think the only option left is to purchase another windows from market.
@@vishalthakur7518
What is the error code of your blue screen error ? Type the code or take a screenshot using your mobile for the blue screen then upload the photo to this website paste.pics/ then add the sharable link of the photo in a new comment.
Also add another photo for the result of the following command:
BCDEDIT
So, we can guide you what to do.
I have no WinRE at first and solved it with partition assistant aomei.
Thank youuu!!!! So much every other video made me do complicated stuff that didnt work and with the power of one code from YOUR video it was fixed thank you and keep up the work!
Thanks, it worked, one thing my windows was on the partition listed as F: in the list volumes, not C:, in case someone else runs into the same issue.
Thank you for this addition!
Still cannot boot after all these operations. Finally Ao mei helped solved this issue.
Howcome
What did you do
Bot reply
You're a wizard! I can't thank you enough
Thanks for this nice reply ☺️♥️
He is a master
THANK YOU SO MUCH!!!!!!!!!!!!!!!!!!!!!!
i had 3Tb of apps/animation projects stored on my drive and was completely unable to boot and get them off. (its my only OS on a sata drive so i couldnt use anything else to copy off the files)
This actually saved my computer:)
Thank you too for your nice feedback!
Don't forget to subscribe! ❤❤🌹
@@ValiumMediaTech lol already done 😆
Thanks a lot man the option 2 worked
Definitely deserves a sub
You are welcome bro, and thanks for sub.
This won't work if I run chkdsk, fixed with aomei partition at last.
you fix it by chkdsk?
LIFEEE SAVEERRRRRR
Thank you for your feedback 🙂
Appreciated bro you earns new sub keep it up😊
Thanks for the sub😊❤️🌹
I did all the instructions except for the format and it worked I didn't wanna lose my data if I didn't care about the data I would just do a fresh install!
Thanks for feedback!
Don't forget to subscribe! ❤❤🌹
It was letrally very helpful to me ! Thank you for this video.
THANK YOU SO MUCHHHHHH THIS SECOND METHOD WORKEDDDDDDDD, IVE SPENT HOURSSSSSS OMG THANKSSSSS
You're welcome!
Don't forget to subscribe!
You'r Amaizing Man ! Keep it up with such helpful Videos.
Glad you like them!
Don't forget to subscribe! ❤❤🌹
Like they said you're the man fixed my no access problem
Many thanks 🙏
Thank u man after so many methods i have tried, only ur 2nd method works for me and error code was 0xc0000098 👌🏻🔥
Thanks for your feedback;
Happy to help you.
Thanks bro. Worked like a charm !! ❤️❤️
Thank you very much for this nice reply 😊❤️
Bruuuhh 😍😍 finally worked....
Thank you so much..bro' ❣️ u saved my 2 pc 😀..
I can't give you anything except 1 subscriber and likes...tysm💕
You're welcome 😊
Glad to hear that
watched like 7 youtube videos and they didn't help at all, but yours did. Thank you !!!!
Thank you very much for your motivating comment.🙂❤️
Don't forget to subscribe if didn't do it previously. 💞🙏🏼
Thank you!
First method worked for me. I have MBR partition table.
Great!
Thanks for feedback
thanks again, in case my friend's asus notebook cannot boot i try your solution and succeed, keep doing great job, you help many people man👍👍👍
You are most welcome
Fixed 0xc0000225 on windows 11 after upgrading my SSD, thank you.
You are welcome!
I am a user of Ao mei partition assistant and I can tell this issue is easy to solve by repairing the MBR.
Thanks bro... you are real computer genius 🎉🎉🎉❤️❤️❤️❤️
You are most welcome ❤❤❤💖💖💖
It's confusing if you have to use the local environment or a bootable USB.
Do we have to use a compatible ISO file to the target OS or it is ignored?
Method 2 worked for me. Thanks a lot! Liked and subbed!
You are welcome 🙂
You didn't lose your programs and personal files right ?
@@Mortywav Yes, no file or app will be lost.
@@ValiumMediaTech i'll try it right now
@@Mortywav Good luck.
Life saver video ... found 100 others which claimed to be working but were not.
bro it shows “ the request could not be performed because of an I/O device error ”
plz help me 😭🥺
Hi. Thank you so much for this. There's something that needs clarification: For method #2, trying to get to boot a GPT disk, do we need to boot exclusively in UEFI mode AND with an EFI USB or CD ( to copy the C:Windows boot data into the new formatted EFI partition)?
In an answer before, you mentioned something about 'not copying the boot data if booting from USB' so, I'm trying to make sure it's OK for a GPT disk botting from a regular WinRE USB, before I proceed. Thank you again!
If you are able to boot into WinRE, then you can copy the BCD without problem, however, it will probably fail to boot from non UEFI USB if you have UEFI enabled in BIOS bios settings.
Watch this video for new method:
czcams.com/video/YGEZF9y2I3w/video.html
Thank you so much dude.. It worked after following many videos.. You are a saver
Thank you too for your nice reply.💞🙏🏼
Don't forget to subscribe if didn't do it previously.🙂❤️
Thanks man, now I actually can use my computer again. I was desperate
You are welcome!
Really i was worried that i have to format my laptop..
Thanks Dude👍.
You are welcome bro.
I honestly can't thank you enough, I recently cloned my main drive due to some issues with it to a m.2 nvme and after the second start i had this issue, I've been trying to fix it all day and wasted so much time on other tutorials once again thank you very much
You are most welcome!
Great to hear that ❤️❤️
Nerelisin kimsin bilmiyorm, youtubede çok sık yorum yapmam, ancak çok ama çok teşekkür ederim, hayatta tüm isteklerin gerçekleşsin sana sonsuz dua ediyorm sorunum çözüldü bilgisayarımdaki bilgilerimi kurtardım
Bu güzel geri bildirim için çok teşekkür ederiz!
THANK YOU SO MUCH!!! YOU'RE A LIFE SAVER!!
Hey thanks man. You are true genius. Worked for me❤
You're welcome!
Thank you so much for this. I struggled with this issue for 4days.
8 days for me...
Dude you're awesome after 4 hours of trying fixing it by myself 🤣 with 5 minutes you got my laptop fixed thank you man appreciate it keep going bro
Thanks man. Deleted corrupted boot record and re-flashed it.
Thank you so much , thank your very much sir because of you I'm feeling very good 😊, my pc got fixed finally because of you , love you. Huge appreciated
Glad to hear that 🌹❤️💕💖🌺
when i press "Command Prompt" it says you "You need to sign in as administrator to continue, but there aren't any administrator accounts on this PC." how do i fix this please tell me how i make an administrator account?
You have to login into desktop in order to create an account.
This error occurs only in some windows versions and can't be fixed, unless you boot the PC from a windows installation media like DVD or USB.
Watch the following video to see how to create a bootable USB using android mobile:
czcams.com/video/cWo2GayUtZQ/video.html
Thank you so much it worked...Been so frustrated
Thank you too for this great feedback.
Don't forget to subscribe :)
working i recommend this channel if you need solutions 100% no clickbait
Thanks for this amazing feedback.
You are a positive subscriber :)
Impressive. Great work. Thank you
You ae welcome!
Thank you! I solved my 0xc0000034 problem. Really, thank you.
You are welcome!
You sir have saved me a tech visit
Thank you so much!
You are most welcome
Bro I love you so much. Thank you like honestly thank you.
Thank you so much. Method 1 worked successfully
You're welcome!
2:40 Bro, It works thank you for helping me
You are welcome!
You are just life saver man. Loves to you 😍
You are most welcome.
YOOOO THANK YOU SO MUCH IVE PASSED SO MUCH TIME IN THIS THING BUT U SAVED ME TY SO MUCH
Really helpful this video. I worry about my pc . I think format my pc. ❤️❤️❤️luckly i wactch this video and fix my pc.
Glad it helped!
first method worked for me. thanks and have a nice day!
2 years and it's still working
Enjoy!
thank you soo much. It worked.
You are welcome; Don't forget to subscribe if didn't do it previously.
Bro it shows " repairs critical disk structures. The following commands are supported".
/fixMbr
/fixBoot
/scanos
/rebuildbcd"
Kindly help me
After /scanos it shows
Successfully scanned windows installations.
Total identified windows installations : 0
Help me bro.
I want my all data
What is the error code and error message that appear in the blue screen or the black screen in your computer?
If not sure, watch the following videos until the end, then see which one is applicable to your problem:
How to fix "Inaccessıble boot device" blue screen and related errors:
czcams.com/video/9Wz4dh1B5_Q/video.html
How to Repair BCD:
czcams.com/video/D9Az4w21ZxI/video.html
What is the error code and error message that appear in the blue screen or the black screen in your computer?
If not sure, watch the following videos until the end, then see which one is applicable to your problem:
How to repair "Inaccessıble boot device" blue screen and related errors:
czcams.com/video/9Wz4dh1B5_Q/video.html
How to Repair BCD:
czcams.com/video/D9Az4w21ZxI/video.html
in the 2nd method
bcdboot C:\windows /s V: /f UEFI
failure when attempting to copy boot files
Watch this video to learn how to fix that:
czcams.com/video/kSb7H73q--Y/video.html
Thank you very much you have really saved me i have searched alot and nothing worked god bless you♥️♥️♥️♥️
after many videos i finally got to the one with the solution, thank you!
Awesome, got me past the error! Thanks!
Glad it helped!
Thanks a lot. Method 2 worked for me...
You are welcome.
it is required to enter current vol label for drive, how do i fix it? i really need my laptop right now, all my work are inside this laptop. this problem happen after i accidentally delete the boot apps and uninstall idm software. please help me
Hit Enter key from keyboard.
If not work, I will show you how to fix that.
I'm waiting for you.
@@ValiumMediaTech still the same. btw thanks for replying❤
@@melissas8019 So, try to type "Boot Part" without quote or any label but not longer than 11 characters with spaces.
@@ValiumMediaTech still the same 😢
Finally! This video worked for the error code: 0xc00000e
Thank you for your feedback.
Bro I am so scared , after I did the usb method I got a screen saying recovery , "your pc/device needs to be repaired , the operating system couldn't be loaded because the kernel is missing or contains errors". Also with an error code of 0xc0000221
Did you watched this video:
czcams.com/video/9Wz4dh1B5_Q/video.html
Also if you have a new hardware installed or connected to your laptop, try to disconnect it first.
Otherwise, try to boot your laptop in safe mode.
Man I love u so much, I can't thank enough 🙏🏻
Thank you so much
I still get the can't automatic repair after doing this. Is my laptop already can't booting?is my laptop finish??
Wait, I don't get it. The second way your booting from other media...you select the boot vol and assign and new letter to it then open that newly assigned vol and format it Fat32. You say yes to the warning that ALL DATA WILL BE LOST. Doesn't that mean that everything in that vol. all your files and windows installation will be deleted? Your first fix would have saved me yet another reinstall of windows....of course I find the help I needed after the fact.
Watch this video:
czcams.com/video/oQcFjr6laeo/video.html