Hey, on the torsion bar suspension, shorten length as much as possible and make the diameter as massive as possible. It makes the suspension much, much stiffer
When merging you need to be sure to start and end with the same node or you will have issues with your mirroring. That is why sometimes your merged blocks work and sometimes they dont.
Proper labeling would help I.e. small Japanese turret 1, small Japanese turret 2, main Japanese turret. It would help sorting out where things and crew need to go.
Well made! O-NI: if you're wondering is one of 4 proposed designs for a "Super-Heavy" tank for imperial Japan during WWII it's unclear if a prototype ever made it to fruition but the project was cancelled due to resources and the end of the war. You got the gun right it did have a proposed 15cm Howzer that being said you kinda made the other proposed weapon of the 10cm tank cannon experimental The smaller secondary turrets weren't as well rounded as yours (primarily due to manufacturing strains) The rear is more flat in the design of it irl again primarily to ease the strain of manufacturing it was a boxy girl As for is it strange to put vents on turrets...well yes and no yes it's definitely uncommon especially with heavy type tanks as it make a vulnerability. BUT! it was done here and there on the odd tank or two to more Better ventilate the already hot and cramped crew compartment Nevertheless all around a great try and the O-NI proposed O-I "Super Heavy Tank".
@@TheLtVoss true but they're still less armoured than the intended armour and prone to gas and fire attacks. And in some cases shrapnel or just overall High Explosive.
@@unknownsierra6297 well that was in wwii and after that with the ever growing treat of nuclear war things changed too over pressure systems with abc filters and so on a tank today is just way better sealed off (that is a reason molotovs aren't a feasible Anti tank wappon anymore)
On your last video I recommended making the T-28/T-35 with your own version of it's design, this is semi-basically it and I know you made this tank with the O-NI in mind though. (I honestly doubt you actually seen that comment because I asked about two hours before this video was uploaded.) However I do have another super heavy tank you might have fun making, the original TOG or also known as the TOG 1. (At least I think you would like making it.)
Like the P. 1000 Ratte and the P. 1500 Monster, the O-I series of super heavy tanks (which the O-Ni would have been part of) were proposed and conceptualized, but never actually put into prototype stages. War Gaming dug themselves into a huge hole by committing the IJA into WOT when the line up of their actual tanks would only last until Tier IV. I really don't enjoy WOT anymore mainly because they clearly don't have a road map with any amount of logic behind it. They want to add more nations into the mix. Nations that didn't have any actual armor divisions or tank development and at best relied on the Allied Lend Lease programs. But they want to add them into the game with the same tech tree division as every other nation AND they need their own gimmick. . . . . I'd play a different War game if I wanted fantasy tanks.
Looks like an O-I experimental, with two turrets instead of one. I have a tank model that I made in google draw, but I don't currently have discord, can I send it to you on like Facebook?
hey don't get me wrong I loved the video, but u havent really made any modern looking tanks in at all I think. Maybe u can build a small infantry MBT w/ a 100mm cannon and a 20mm autocannon on to of the man turret. For the chassis go w/ a abrams shape or smh. and use only 3 road wheels and return rollers. Just a suggestion :)
Hey, what mod do you use? also, i loved the concept :3 and i really love the aesthetics of IJA and Japanese Tanks, they are so pretty, and you did replicate very well and did it so nicely too with this concept
I don't think he's using a mod. If you're seeing him use some things you don't have yourself, it might be because he's on the experimental branch of the game. You don't need to do anything hugely special to get that yourself. If you're on Steam, right click Sprocket and then go into the Beta's menu. From the drop down, select [experimental]. Exit out of that menu. The game should reinstall, but as the experimental version, which has all of those things like the ammo placement and the extra cupolas. The risk is, though, that like every other experimental version of games, the game's stability is questionable. I haven't ran into anything apocalyptic, but I have had issues where the game bugged out and I couldn't edit my tank until I exited the map and loaded the tank back in on a new one.
can you try making a supercar but on tracks and with a small gun in the front like the ramming tank you made a few vids ago but then make it look like a car
I pray you read this comment, but when merging, the point you select first matters! when you are merging two points, the second one you click will be the one that is remaining.
Officially, there was no O-Ni super heavy tank ever built and technically, it was never conceptualized either. However, it would have probably, theoretically, been the second version of the proposed, but never built O-I super heavy tank. I will emphasize that these were theoretically proposed tanks. There was no way in Antarctica that they would have ever been able to build even prototypes of these things. First off, they were a proposed 100+ tons in weight. I kind of don't have to go any further than that because that one fact is the straw that breaks this camel's back. The didn't have the steel, manufacturing capability, or time to even finish out the entirety of their planned Yamato-Class of super battleships. They had the I-400 submarine carriers also planned and in the works. The navy was getting first priority for resources, then their air force, then their ground troops, with armor corp coming at last for resource needs. More than likely because the armor game for the IJA wasn't really a thing for them. The tanks they did have weren't super effective against the Shermans and Matilda II's being thrown at them on the islands they were deployed to and they had too few for them to really amount to anything in comparison to what the US was pumping out for the Allies. They just did not have resources on their side to make it happen. Beyond not having resources, they did not have the means to deploy it. If they had built it, it would have stayed on mainland Japan or wherever it was being built because the Japanese did not have the means to lift 100+ ton vehicles into their ships and their ships were so mishmashed and some of the capabilities of their navy at the time was so questionable that they would have lost any of them they made and tried to move. If you want proof of the incompetency of the IJN during WWII, just note that from a little before the war to the end of the war, they had about 9 collisions between their own ships. One sank the destroyer Miyuki before they got the WWII started on their front and I want to say about 3 of the remaining 8 involved the same light cruiser repeatedly running into other ships on different occasions (not like multiple ships being hit, but like it's the constant in the equation of ship to ship collisions in the IJN.) So as cool as these things are to conceptualize, they just never were going to happen. To place the front twin turrets, couldn't you make a small outline of rivets around the one turret mirroring it to the other side of the hull and then use that as a target for placing the other one . . . . or should I just shush my mouth?
It looks like the two little Turrets weren't worth it and they might as well sub out for somethin else... maybe Anti-Inf Guns? ... does this game even have Infs...?
What do we think of this heavy guy!?
Try making KV-44
Its cool
Y las Malvinas
Y las Malvinas
Y las Malvinas
Bonus quality of superheavy tanks is they can double up as entrenching tools if you just drive them over soft ground.
So true, im sure it'd work really well :D
You see Ivan, this tank can also double as a bunker if you drive over that mud!
@@CharlesCalvinTheUndying 😂
@@CharlesCalvinTheUndying THIS IS THE GREATEST PLAAAAAAAAAAAAAAAAAAN
@@CharlesCalvinTheUndying love the profile also sorry about the escape pod incident
Looks like an O-I hull, with a Chi-Nu turret mixed with the multi turret concept of the T-28. Looks great, well done on it.
Its the O-Ni from world of tanks.
@@DeadAccount53885 that’s what I’m saying lmao it’s literally just the O-Ni
what?
Hey, on the torsion bar suspension, shorten length as much as possible and make the diameter as massive as possible. It makes the suspension much, much stiffer
Sprocket should add a reload truck in the middle of the match that you Rendezvous with to get more rounds for your tank if you run out
Especially for the Kärl Gäret tank you built
I imagine a mad russian lad driving at full speed, throwing the shells on the ground and driving back
When merging you need to be sure to start and end with the same node or you will have issues with your mirroring. That is why sometimes your merged blocks work and sometimes they dont.
Proper labeling would help I.e. small Japanese turret 1, small Japanese turret 2, main Japanese turret. It would help sorting out where things and crew need to go.
Imagine your a US soldier at Iwo Jima and see that tank as shown in the thumbnail
And it turns it's turret slowly towards you that would send shivers down his spine
I can guess that you based this tank to the Japanese Ishi-108, awesome design as always bro.
The O-Ni but the Ishi-108 seems fun too :D
The O-i was the only Japanese super heavy that might have actually made it to prototype stage
O-NI only existed in blueprints,amaizing video bro💪
37:35 Could be that they found a shot to inside wall of the track coverings. Bet you didn't add armor there.
I added some :)
Well made!
O-NI: if you're wondering is one of 4 proposed designs for a "Super-Heavy" tank for imperial Japan during WWII it's unclear if a prototype ever made it to fruition but the project was cancelled due to resources and the end of the war.
You got the gun right it did have a proposed 15cm Howzer that being said you kinda made the other proposed weapon of the 10cm tank cannon experimental
The smaller secondary turrets weren't as well rounded as yours (primarily due to manufacturing strains)
The rear is more flat in the design of it irl again primarily to ease the strain of manufacturing it was a boxy girl
As for is it strange to put vents on turrets...well yes and no yes it's definitely uncommon especially with heavy type tanks as it make a vulnerability. BUT! it was done here and there on the odd tank or two to more Better ventilate the already hot and cramped crew compartment
Nevertheless all around a great try and the O-NI proposed O-I "Super Heavy Tank".
Well there are armored ventilations /smoke Extractor the Tiger (a heavy tank) for example had one behind the loaders hatch (the square one)
@@TheLtVoss true but they're still less armoured than the intended armour and prone to gas and fire attacks. And in some cases shrapnel or just overall High Explosive.
@@unknownsierra6297 well that was in wwii and after that with the ever growing treat of nuclear war things changed too over pressure systems with abc filters and so on a tank today is just way better sealed off (that is a reason molotovs aren't a feasible Anti tank wappon anymore)
On your last video I recommended making the T-28/T-35 with your own version of it's design, this is semi-basically it and I know you made this tank with the O-NI in mind though. (I honestly doubt you actually seen that comment because I asked about two hours before this video was uploaded.)
However I do have another super heavy tank you might have fun making, the original TOG or also known as the TOG 1. (At least I think you would like making it.)
The T-28/T-35 and the TOG are awesome, I might do something like that soon! :D
If it's in world of tanks, then there is a high chance that tank is a prototype, experimental, or a blueprint that was never actually built.
Its a completely non existent tank
Like the P. 1000 Ratte and the P. 1500 Monster, the O-I series of super heavy tanks (which the O-Ni would have been part of) were proposed and conceptualized, but never actually put into prototype stages. War Gaming dug themselves into a huge hole by committing the IJA into WOT when the line up of their actual tanks would only last until Tier IV. I really don't enjoy WOT anymore mainly because they clearly don't have a road map with any amount of logic behind it. They want to add more nations into the mix. Nations that didn't have any actual armor divisions or tank development and at best relied on the Allied Lend Lease programs. But they want to add them into the game with the same tech tree division as every other nation AND they need their own gimmick. . . . . I'd play a different War game if I wanted fantasy tanks.
Hey Frantic! The hull of the Tank you built in this video at 11 minutes & 50 Seconds, sort-of looks like the Polish PL-01 prototype stealth Tank.
Frantic, just so you know. Heavy tanks were angeled because it provided extra armor efficency
i want to get this game so badly, im currently on a ww2 obsession and this would be cool to use to make cool tanks!
Looks like an O-I experimental, with two turrets instead of one. I have a tank model that I made in google draw, but I don't currently have discord, can I send it to you on like Facebook?
Oo, cool! I dont really do Facebook Tbh. Discord is the best place for this stuff :)
Well it's called the O-NI a fake successor to the O-I
@@FranticMatty ok then, do you have a Gmail I can send it to? It's just a single image, not any files or anything like that.
@@FranticMatty it could be your new series. create a tank from the viewer's drawings. Would be interesting
@@rayyan8035 done the before :P
lol I think your little guns' shell collided mid air and knocked each other out
Really? :o
hey don't get me wrong I loved the video, but u havent really made any modern looking tanks in at all I think.
Maybe u can build a small infantry MBT w/ a 100mm cannon and a 20mm autocannon on to of the man turret. For the chassis go w/ a abrams shape or smh. and use only 3 road wheels and return rollers. Just a suggestion :)
Great vid Frantic i recognise the tonk from war thunder!!! Very cool vid :)
Thanks bud! :D
Hey, what mod do you use?
also, i loved the concept :3
and i really love the aesthetics of IJA and Japanese Tanks, they are so pretty, and you did replicate very well and did it so nicely too with this concept
I don't think he's using a mod. If you're seeing him use some things you don't have yourself, it might be because he's on the experimental branch of the game. You don't need to do anything hugely special to get that yourself. If you're on Steam, right click Sprocket and then go into the Beta's menu. From the drop down, select [experimental]. Exit out of that menu. The game should reinstall, but as the experimental version, which has all of those things like the ammo placement and the extra cupolas. The risk is, though, that like every other experimental version of games, the game's stability is questionable. I haven't ran into anything apocalyptic, but I have had issues where the game bugged out and I couldn't edit my tank until I exited the map and loaded the tank back in on a new one.
@@steeljawX ahh thanks!!!!
You should try a UFO tank where the track is hidden underneath and cannon on top
I'm a simple man. I see big tank, I click
Great video👍
Thanks :)
The rear having less armor is actually a disadvantage since most tanks do that, the enemy will know to attack the rear
ok so i get this exact same problem with multi turrets so thanks for showing how you fixed that issue
you are very honest with us. ^^
Turns out xD
Needs anti personnel mgs on both the smaller turrets
Those 2 smaller turrets reminded me of Mitsu 108
30:40 i guess tank commanders are just a myth.
Can’t wait to download your O-Ni later on in the year😊
This tanks seems like the baby of an old US amphibious tank and a Japanese land ship
mmm close enough, Nice
Frantic - "heavy tanks have a relatively flat front"
*Tiger II enters the chat*
IS-7 tank enters the chat
Awesome work, btw the secondary guns should be 47mm.
Ha ha, funny fard gas makes lungs go brrrrr!
MORE STORMWORKS!!!! I like the last video
Cool tank!!
Next Tank you should do is the O-Ho
Finally after all these long day i finally got first in a video
Good job :D
Now imagine the government taking notes from you building these behemoths you boutta make one of your subscribers country be powerful
O-I was to be a real tank from my knowledge.
Nest tank design ever
Actually there is weight measurements to classify tanks, this would just be a normal heavy tank, super heavy tanks weighed 100tons and over
Try this:
Teeny tank
Make a tank as small as possible, literally it. Make it super fast if you can because small go fast.
6:04 kinda looks like the front of a half track, could just be me tho.
very good, i love that tank
That super heavy tank be looking like the T-28 but built by the Germans and Japanese💀
How did you make this tank so fast? I try to make cool things like these, but they're always too slow to do anything
Looks like The O-Ni from World of tanks and that thing its about 168 tons if not mistakeing
This reminds me of the Mitsu 108 from WOT:B
Please could you build either bradly from rust or a tank from war hammer 40k space marine chapter
Reminds me of the WoT O-Ni
Do the side track Armor works
Could you make a char 2c French super heavy tank?
Maybe eventually :D
It really looks like a type 5 heavy
can you try making a supercar but on tracks and with a small gun in the front like the ramming tank you made a few vids ago but then make it look like a car
I pray you read this comment, but when merging, the point you select first matters!
when you are merging two points, the second one you click will be the one that is remaining.
Did you base this off the Mitsu 108 a Japanese heavy tank?
I think its awsome, it looks alot like the 0-1
you bassicly made a o-ni lol
It kinda looks like the m6a1 American heavy tank but with three turrets
I do 120T with max armor :P
Thumbnail looking like a Mitsu-108
Looks just like O-NI
O-I Super have tank was made is Japan, I think.
built the O-NI nice
Officially, there was no O-Ni super heavy tank ever built and technically, it was never conceptualized either. However, it would have probably, theoretically, been the second version of the proposed, but never built O-I super heavy tank. I will emphasize that these were theoretically proposed tanks. There was no way in Antarctica that they would have ever been able to build even prototypes of these things. First off, they were a proposed 100+ tons in weight. I kind of don't have to go any further than that because that one fact is the straw that breaks this camel's back.
The didn't have the steel, manufacturing capability, or time to even finish out the entirety of their planned Yamato-Class of super battleships. They had the I-400 submarine carriers also planned and in the works. The navy was getting first priority for resources, then their air force, then their ground troops, with armor corp coming at last for resource needs. More than likely because the armor game for the IJA wasn't really a thing for them. The tanks they did have weren't super effective against the Shermans and Matilda II's being thrown at them on the islands they were deployed to and they had too few for them to really amount to anything in comparison to what the US was pumping out for the Allies. They just did not have resources on their side to make it happen.
Beyond not having resources, they did not have the means to deploy it. If they had built it, it would have stayed on mainland Japan or wherever it was being built because the Japanese did not have the means to lift 100+ ton vehicles into their ships and their ships were so mishmashed and some of the capabilities of their navy at the time was so questionable that they would have lost any of them they made and tried to move. If you want proof of the incompetency of the IJN during WWII, just note that from a little before the war to the end of the war, they had about 9 collisions between their own ships. One sank the destroyer Miyuki before they got the WWII started on their front and I want to say about 3 of the remaining 8 involved the same light cruiser repeatedly running into other ships on different occasions (not like multiple ships being hit, but like it's the constant in the equation of ship to ship collisions in the IJN.)
So as cool as these things are to conceptualize, they just never were going to happen.
To place the front twin turrets, couldn't you make a small outline of rivets around the one turret mirroring it to the other side of the hull and then use that as a target for placing the other one . . . . or should I just shush my mouth?
Wich sprocket game you use i use the one from steam and there is not so much stuff to work
Why did he go “ToO!”
Essentially a misu 108
This tank is actually based of the Mitsu 108
This was torture
Can you make a MarkIV tank?
Very riveting.
I built one that was 112T and it went 127kph. No cheats, no mods
how do you have this update? is there different update times?
Call it the Maus V.2
I made a tank kinda like this recently. But I messed up and made it 400+ tonnes….
It looks like the two little Turrets weren't worth it and they might as well sub out for somethin else... maybe Anti-Inf Guns?
... does this game even have Infs...?
i see there O-NI tank
Yep :D
what if you made a 100 ton behemoth
Make a raming tank
this is vary Ching chilies of you
I like it 👌
5:20 Creeper...
i dare him to do O-I
Build kv
44
why does it look like the O-NI from world of tanks?
Because thats what its based on?
Super..
Sheesh
Eeeeee
@@FranticMatty Eeeeee
İt's O-Nİ From World of tanks
I wish it was on mobile :(
Japanese Maus
O-NI Japanese tank.
It wasn't a tank it was only a blue print
First
Noice! :D
Waffle House has been terminated
Wew
Yes, but the IHOP has found its new management