Hi, this is the review of the fake gti pro lite gun. Guys help me make more videos by donating on this link www.paypal.me/... the money will be used to make new videos and reviews Thank You.
Grey scotch is not enough on fender need to wet sand but first test with thinner if primer comes off you have to sand it off and prime it again if it doesn't it's epoxy primer and it's fine to sand and paint, but be safe and seal bumper and fender, I've seen new paint peel off .
pharrawy, your two videos on the fake GTI Pro Lites are pretty good. I like this video because you actually testing out the gun. After watching the gun spray, I ordered two GTI Pro Lite (both fake), one with a TE20 air cap and one with a TE10 air cap from AliExpress. Both with 1.3mm needles and I purchased a T110 air cap with a 1.3mm needle with a total cost of about $195. Also picked up an extra 600ML pot for $9. I plan on using one for basecoats and one for clear. I have some other guns that have 1.4mm and 1.7mm needles that will do for primers and sealers. I will be watching your videos for more helpful information. Thanks!
Just checking out some of your old videos bro lol I just won 2 of these on eBay for super cheap and came across your video lol! Thanks for posting this one!
Nice job man. That gun seems to shoot great. I have a couple of questions for you. 1. How big (gallons) is your air compressor? 2. What psi were you running going into the gun? 3. What were your settings on the gun to achieve that foray pattern? 4. Where do you get your paint and clear at? I appreciate your help on these questions sir. Once again, great job!
sorry farraway forgot to ask you what tip nozal size you using and so far you have been great answering qustion that i need to know as a novis a real big thanks and credit is due to you thanks again
It seems like for the money it might not be to bad of a gun I just bought a FRIEND lite used on eBay for $266 dollar's without the box looking at your comparison video I'm not sure I could tell the original vs fake I hope I bought the real thing I haven't tried it yet any idea on tell apart without seeing both
Hello may i know which gun do you think will the best recommendation for spraying, mini gun, DTM epoxy primer or primer surfacer, sealer, base coat and clear coat? The best gun for each use? Thankyou so much
i just got this so called fake gun box came with hologram saying original and finish is good too yet to try it out it came with t110 plus i got te20 air cap mine isn't covered in grease very light at best am just paint my own items
You know how I know you love what you do? Because you’re great at painting and body work and your car port wall is half ass painted. Hahaha. I turn wrenches for a living and love every minute of it, but I’ll drive my truck with only one headlight for six months until somebody offers me a free headlight at the shop.
Dang bro that 2nd coat wow mine does the same way if you try to go lower than that it doesn’t atomize very well maybe one day I can get me a better one I think mine is worse than yours lol
Thanks for the review,im looking to get a fake devilbiss also, like many cant afford to get the real deal,besides the gun my question is about your air compressor,wich one your using how many galons and cfm,and were did you get it,also how much,im looking to get into painting motorcycle parts wich are not big and ive been told i need a 60-80 galon compressor and 10-14 cfm, but i see yours is small and heard it recharge a couple of times while spraying but i saw no issues with the spraying when it recharged,bumper and fender looks good👍👍
Pharraway what i might of saw was your power washer,in one of your videos i saw you have a husky compressor looks like a 60 gallon,by the way im the one who commented about what air compressor you wher using and how much,👍👍i was actually looking at one on craigslist for 400 bucks,husky.
Ok. I'm gonna check it out. I'm a low budget painter. Can't really afford $500 for the real one. I may just use my iwata for clear and use this for basecoat
pharraway I got it.. I'm sorry if you get me wrong.. that gun spray very nice, and i understand why so many people spray with those guns, genuines are so expensive. You do excellent work! 👍
Quit using knock off guns and you won’t have any issues. If you’re looking for a flat finish, get the real gun and use the t110 aircap. Don’t waste your money on fakes. If you can’t make back the money you spend on the first job, you shouldn’t be painting, frankly. People pay for good paint.
@@PHARRAWAY Thanks for review and actually showing a paint job with gun. Some of us are not professionals and may be planning to just paint a personal vehicle one time. Why do we need to purchase a high dollar gun for one time use, when our results probably wont come out perfect anyway ? This gun is no more costly than an entry level gun and might help achieve better results. I watched many reviews on this gun with many people bashing them but you are only person that actually painted with this gun and gave an honest unbiased opinion, thank you for that.
pharraway it is but believe it or not I bought 2 brand new ones from amazon. The first one had scratches on it and a divot in the handle's finish. The second had scratches on one of the air caps and the knobs for the fluid and fan were horribly machined. It looked like they just stopped trying to machine the parts properly. I took off the parts and made 1 decent gun out of em, and returned the other gun. Tekna's build quality and quality control is a joke
Tekna is made by Devilbiss. The Tekna ProLite is the US version of the GTi Prolite. There are fakes out there of both models. AliExpress have the fake guns at real low prices and you will find them branded under different names.
Grey scotch is not enough on fender need to wet sand but first test with thinner if primer comes off you have to sand it off and prime it again if it doesn't it's epoxy primer and it's fine to sand and paint, but be safe and seal bumper and fender, I've seen new paint peel off .
pharrawy, your two videos on the fake GTI Pro Lites are pretty good. I like this video because you actually testing out the gun. After watching the gun spray, I ordered two GTI Pro Lite (both fake), one with a TE20 air cap and one with a TE10 air cap from AliExpress. Both with 1.3mm needles and I purchased a T110 air cap with a 1.3mm needle with a total cost of about $195. Also picked up an extra 600ML pot for $9. I plan on using one for basecoats and one for clear. I have some other guns that have 1.4mm and 1.7mm needles that will do for primers and sealers. I will be watching your videos for more helpful information. Thanks!
Thank You
LR Wilson how are the Guns spraying !?
Just checking out some of your old videos bro lol I just won 2 of these on eBay for super cheap and came across your video lol! Thanks for posting this one!
Anytime brother
Nice work ! and here I thought I was the only one to paint in flip flops :) thanks for the review on the gun
Thanks It's hot where I'm, at so flip flops it is
pharraway 👍
Nice job man. That gun seems to shoot great. I have a couple of questions for you.
1. How big (gallons) is your air compressor?
2. What psi were you running going into the gun?
3. What were your settings on the gun to achieve that foray pattern?
4. Where do you get your paint and clear at?
I appreciate your help on these questions sir. Once again, great job!
Murrica Motors just watch his vids all of that gets said at some point.
Clear coat them toes. Great work
LOL
Good tips thanks
Nice vid buddy the clear didnt look bad from here lol think im get one to try lol
Good work Pharraway!
Ratsnest Hotrods Thank you brother
Thanks for the demo video, was wondering about the fan on that gun
It sprays the same as the real thing
Thanks bro for the input I bought a China trans tech same way a lot of over spray but it was all I could afford
It works any ways but that over spray wow
Yea really I went through a pint of paint I about a min it seemed like lol
But it did spray ok i like your channel bro good info
Thank You
sorry farraway forgot to ask you what tip nozal size you using and so far you have been great answering qustion that i need to know as a novis a real big thanks and credit is due to you thanks again
Great job bro, thanks for the info, i just bought one
I definitely like you work man c
Thank You brother
Should paint atleast an inch on back side of edge's to keep paint from peeling off edges
Great job my friend
Thank You
A lot of over spray but the clear looks like it is slick as glass.maybe turn fluid and air down a bit.
Very good review
Thank You
nice video thanks
Thanks
It seems like for the money it might not be to bad of a gun I just bought a FRIEND lite used on eBay for $266 dollar's without the box looking at your comparison video I'm not sure I could tell the original vs fake I hope I bought the real thing I haven't tried it yet any idea on tell apart without seeing both
You are awesome
Do you think wax and grease remover is good or could you use acetone lacquer or alcohol
Acetone is also good
Yup!
I think this gti is a little bit heavy on top part of the pattern
Hello may i know which gun do you think will the best recommendation for spraying, mini gun, DTM epoxy primer or primer surfacer, sealer, base coat and clear coat? The best gun for each use?
Thankyou so much
I am amazed, how is it that your feet ain't like a Chameleon after so many paint jobs wearing Flip Flops xD
Thanks for sharing
i just got this so called fake gun box came with hologram saying original and finish is good too yet to try it out it came with t110 plus i got te20 air cap mine isn't covered in grease very light at best am just paint my own items
Thx I ordered one from ebay 99 dollars..
Nice
You know how I know you love what you do? Because you’re great at painting and body work and your car port wall is half ass painted. Hahaha. I turn wrenches for a living and love every minute of it, but I’ll drive my truck with only one headlight for six months until somebody offers me a free headlight at the shop.
Dang bro that 2nd coat wow mine does the same way if you try to go lower than that it doesn’t atomize very well maybe one day I can get me a better one I think mine is worse than yours lol
Thanks You
ty for the info
nunya your business your welcome
My comment was 1st again kool
LOL cool
Thanks for the review,im looking to get a fake devilbiss also, like many cant afford to get the real deal,besides the gun my question is about your air compressor,wich one your using how many galons and cfm,and were did you get it,also how much,im looking to get into painting motorcycle parts wich are not big and ive been told i need a 60-80 galon compressor and 10-14 cfm, but i see yours is small and heard it recharge a couple of times while spraying but i saw no issues with the spraying when it recharged,bumper and fender looks good👍👍
Johnny Rivera Thanks I will be doing a review on the compressor and the filters next I'll be posting it on Saturday
Thanks,👍👍
Pharraway what i might of saw was your power washer,in one of your videos i saw you have a husky compressor looks like a 60 gallon,by the way im the one who commented about what air compressor you wher using and how much,👍👍i was actually looking at one on craigslist for 400 bucks,husky.
Johnny Rivera go get a used DeVilbiss! They will last longer and perform way better! Remember tgat you get what you pay for.
Please explain the can of adhesion promotor? Is that for ALL aftermarket parts metal and plastic?
That will be only for plastic parts new or old
@@PHARRAWAY Gotcha Great....
Would you say you could do a better job with rattle can or with the fake gti Pro?
What psi was you using I looked at those they advertise them lvmp guns I don’t know if they are
I was at 28psi for base and clear
Great video as always. Please continue making em. Do you remember the seller and how long did it take to get the gun from eBay ?
The seller is globeorder and it took over 1 month to get
The seller shipped it quickly but the USPS took long
Ok. I'm gonna check it out. I'm a low budget painter. Can't really afford $500 for the real one. I may just use my iwata for clear and use this for basecoat
That will work perfectly
I ordered one as well from o.k.dealz. Im hoping for the best!
Good video , were did you bought those chanclas?
Walmart LOL
Which spray gun brand do you recommend to paint at your garage ?
rubenz0844 The Walcom carbonio 360
How do u know when just paint the new parts or to blend in to the next panel?
You need to blend almost every time but if you have a good paint rep that can match the paint well you don't need to blend
Do you recommend fake sata to clear coat?
You mention that you got a lot of overspray when shoving clear with that gun. What air cap did you get on it?
To tell you the truth I don't remember and I don't have that gun anymore
Cant you dial the fluid in so not much overspray. And in previous video. Im pretty sure he has T110. Best for clear
Correction.. End of this video it shows gun with TE20 aircap.
Where did you get the fake gti pro lite from, and what did it cost.
on eBay for about $130
sounds like it's spitting the air pressure
Carlos Montes no the go pro is in closed for protection and doesn't get the right sound
Was that a raw plastic bumper or a primer bumpers
Carlos Montes raw with the adhesive promoter no need to prime, if you want you can ad sealer after the promoter
whats color?
Sorry don't remember it's been awhile
Whats an average cost to paint a bumper? Or a fender?
Elchingon_92 if there new, with material your looking about $250 and up
Guns prolly the real thing just the rejected guns from quality control.
Nope made in China 🇨🇳 copy, they even have DV1’s now copied
@@PnwOnTour where to find dv1?
Flee bay there’s blue and purple 💥😆💥
@@PnwOnTour the d is backwards it looks like cv1
How many turns out was the fluid?
Hiii You open it all and turn one in will work fine
👏👍👌
Nice work, but don't you care that those fake guns ruins real and good brand..?
Riku Koivisto yup but just telling my opinion on the gun
pharraway I got it.. I'm sorry if you get me wrong.. that gun spray very nice, and i understand why so many people spray with those guns, genuines are so expensive. You do excellent work! 👍
hello paharaway this adheation promoter could you get away with just 2 coats?
Were did u buy it at?
Ebay
Is that the real devillbiss or the fake one ?
The fake one
Way to wide on fan pattern your getting alot of mist overspray
I have one of it but if you close it little bit it is center heavy
Is that the fake pro lite
yes
Where can I buy this gun at and what's the price on it?
I got it on eBay for like $112
@@PHARRAWAY sweet, can you tell me the exact name of it, because I cannot find the 2 gun kit like you got.
@@ls4.8frank DEVILBISS Gti Pro Spray Gun Paint High Efficiency TE20
Your fan setting is too wide and pressure to high for clear, not the gun it's not knowing how to set up your gun,
Nah this gun does not work like the original, its too center heavy
Quit using knock off guns and you won’t have any issues. If you’re looking for a flat finish, get the real gun and use the t110 aircap. Don’t waste your money on fakes. If you can’t make back the money you spend on the first job, you shouldn’t be painting, frankly. People pay for good paint.
Thank You just showing people that can't afford a $600/$700 dollar gun what they can use.
@@PHARRAWAY Thanks for review and actually showing a paint job with gun. Some of us are not professionals and may be planning to just paint a personal vehicle one time. Why do we need to purchase a high dollar gun for one time use, when our results probably wont come out perfect anyway ? This gun is no more costly than an entry level gun and might help achieve better results. I watched many reviews on this gun with many people bashing them but you are only person that actually painted with this gun and gave an honest unbiased opinion, thank you for that.
@@niceguy1287 Anytime brother I will be doing more videos on fake or copy guns and see how the really spray
good thing I didn't buy this. I got the tekna prolite instead
Nice gun
pharraway it is but believe it or not I bought 2 brand new ones from amazon. The first one had scratches on it and a divot in the handle's finish. The second had scratches on one of the air caps and the knobs for the fluid and fan were horribly machined. It looked like they just stopped trying to machine the parts properly. I took off the parts and made 1 decent gun out of em, and returned the other gun. Tekna's build quality and quality control is a joke
wow did not know that good to know Thanks
Tekna is made by Devilbiss. The Tekna ProLite is the US version of the GTi Prolite. There are fakes out there of both models. AliExpress have the fake guns at real low prices and you will find them branded under different names.
yup you need to be careful where you get them they are fake ones out there
Tons of air pollution fanned out into the neighborhood.
Go hug a tree lefty.....