2021 SeaDoo RXTX with a RXP-X 300 Rotax Motor Stage 1 | Project Barney Part 1+ Calas Tech Tips
Vložit
- čas přidán 7. 09. 2024
- Today we build a 2021 Sea-Doo RXT-X hybrid Motor and Harness from a donor Jetski a 2019 RXP-X 300. It will be equipped with a Calas Stage 1 upgrade.
Lets see wha happen!
Be sure to follow me on
IG - / calasperformance
FB - / calasperformance
Calas Performance www.calasperfo...
Check out DDR Performance
ddrperformance...
Check out the fizzle factory
www.fizzlefact...
#calasperformance
#DDRMarine
#seadoo
#fizzle
#pwc
#jetski
Director/Video Editor/Producer/Drone Pilot/Videographer
Dessie Vizcaino
77mph! I'd be thrilled with that
Can't wait to see the next video with props. Still ha e stock on mine with stage 2 tune. 4 blade still in box. Show me the way oh Master seadoo man
This man makes magic with spare parts. 77 mph
I liked that's very much year's 2015 and 2016
I’m very excited to see what the 21 impeller does because I was doing 80 with my 13/18. Just bought the 21 impeller but haven’t had it out yet. Another great video. Love the content.
Another excellent video with excellent explanations and humor... Hope the wife likes the final build 😊
Man, this is really great information I used to race long race is three hours never sink, but I’ve seen it before. Never had a issue even since 1995 lol great work.
And that’s so funny you say that about checking the oil I never wanted to say anything but I told one of my guys and they all look at me stupid like I can’t check the oil lol I always had a problem 2016 Simple check in the oil usually at fired up don’t Take it out the dipstick wipe it off put it back in count at 15 take it out look at it it’s always different. All my skis are always put a little bit less oil than factory Sea-Doo does that always overfill it?lol
And my catch can is always just a monster energy drink with a hose got in it I’ve never had any problems lol
Super easy putting the catch an at the back!
Love the content. I will have to make the journey from Wisconsin one of these days to meet Mr Seadoo lol.
Great job Carlos building on a budget ! 👍
Love the color. That is the same as my 21.
Awesome content as always Ernesto.
Big fan here in Australia mate. Keeps these videos coming. 👊
Will be very intresting, im waiting 🙌
Eres una fiera guajiro 👍🤣
Looking forward to the next video, mine runs at 77 .. standard impeller.. riva intake and blow off valve
Wow perfect timing , I'm having the same exact issue on my 2021 turbo build. Do you happen to have another 2021 shaft to sell ?
Enjoy the videos , thank you
Another great video! One thing that really caught my eye was when you mentioned measuring the oil in a post 2016 300hp. Does your solution allow you to check the oil without going through the whole running the engine out of the water and pulling the key before pulling the dipstick procedure??
Great video, quick question? Will you put a set of Riva sponsons on?? As the ST3 hull is shocking in any kind of chop hunting all over the place , they really help a lot , thanks for sharing your videos Tks
Exclusive wonderful JetSki I want to win this races I would like Yamaha's SVHO Cruiser JetSki GP1800 , Kawasaki's LX-5 Ultra 610 and also RXP - 300 JetSki Sea Doo .
Hey Calas where can you get a hull? Looking to get a newer hull as I have a 2007 with a 2012 motor and electronics and I want to put the built motor into a newer ski hull
Those new carbon seal boots are super stiff and that tool is a must! Did you modify the intake with screen delete?
👌👍
Great Video as always. Did you upgrade the Flywheel Bolts to ARP and Pin the Crankhaft on Barney? Unrelated 260 question with stock ECM: Does the stock ECM limit Max RPM (RPM already has the "s" built in at the end of Revolutions / it's redundant to add an "s" to RPM) as both Air and Water Temperature Increase? Example what would the Maximum RPM be of a properly running totally Stock 260 be with an Ambient Air Temperature of 89F and Water Temperature of 89F be? Randy AKA randog311
between 8000 to 8150 if you have more than that, you have to either pitch your prop, 1 mm bigger or get a different prop
@@calasworld My question was: Does High Temperature (89F) Water and Air have a lower RPM Threshold Limit (Stock ECM only) than let's say 70F? (8000 to 8150 at 70F)
Hey bro, thanks for everything you share with us. What’s the name of your intro/outro song 🎵? I want to blast it on my jet ski… 🇵🇷
Lost Sky- Fearless Featuring Chris Linton
@@calasworld WOW, thanks. That was quick. Hope to meet in person someday in the water. Much blessings 🙌...
Another fun video !!! Can't wait to see the next one on the props , if you read this a quick question = is there any easy way to vent the hull for cooler air ? I ride in Austin Texas and our Temp's here are hitting 100+ degrees , .... 07 RXT , as fast as possible 😃 As always enjoyed your video , Sea Doo Life j. 🇨🇱
You can make some holes around the steering area behind the plastics
im still amazed i can hit 85 on my 21 gpr w completely stock exhaust resonators and all
Question. Should I buy a 2016 rxtx with 96 hours. Sounds good and looks good in the pics?
If your wife is like mine she would not like the free flow exhaust 🤦🤦🤦 my half did not last 5 minute on it 😂😂 I had to teke it off back to stock... But still have speed so😂😂 I compromised
good stuff dude, i like it #newsubscriber
Welcome to the family
My name is Tyler Nashville tn. If i drop off my grandsons 2005 rxt seadoo could you Put a motor in it the Number one piston came apart in the cylinder. That's why we need a new motor everything else is good. Is there anything you can do to help me out?
Reach out to me at calasperformance@gmail.com
@@calasworldyes
Lol. Wife wants quiet and not fast. You just can’t help yourself, can you!? 😂
f-RXTX-ankenstein.
'Promosm' 💕