Traxxas Xmaxx Pinion & Spur Gear Replacement Guide
Vložit
- čas přidán 23. 07. 2024
- In this video is a Step by Step guide in replacing Traxxas XMAXX Spur gear and Pinion gear. Strap in your seat belt and let's learn something new today!
0:00 Intro
0:38 Spur gear replacement
6:48 Pinion gear replacement
#xmaxx #traxxas
Tools used:
Traxxas Speed Bit 1.5, 2.0, 2.5, 3.0 Allen ¼’ drive
amzn.to/32jbqX9
Black+Decker 4v Cordless Screwdriver
amzn.to/2FnB5EY
If you enjoyed the video and/or learned a few things. Consider checking out the next Airsoft Stream Tech Q&A every Saturday @ 3PM MST.
Twitch Live Stream Q&A @ bit.ly/WyshTechTwitchChannel
Follow WyshTech Hobbies!
Twitter: bit.ly/WyshTechTwitter - For exclusive content updates and announcements!
Discord: bit.ly/WyshTechDiscord - For Live help on your airsoft project!
Want to support the channel?
Check out the Merch store! Link here: bit.ly/WyshtechMERCH
You'll find BLS and Exact BBs. As well as a particularly useful Wyshtech Branded Solar Power Bank for those airsoft field days!! All revenue goes towards supporting both CZcams and Twitch channels for giveaways, sustaining awesome content, and so much more! - Jak na to + styl
👍 switched mine to 20/50 and couldn't figure out how to adjust it... thank you !!!
Easy to follow. On point. Nice work
Thanks for the input!
Thanks for the quick n easy walkthrough, bro
No problem! Glad to help!
Excellent video well done 👏l just Purchased a xmaxx l was wondering about the pins all good now thanks 😊
Anytime bud! How are you liking your Xmaxx?
Back again just dun mine nice and easy thanks to your video. Thanks from U.K. 🇬🇧👍🏻😎
Glad to help bud!
@@wyshtechairsoft yep thanks an fitted green led light bar .👍🏻😎🇬🇧
Awesome work 🏎💨💯😎
Thank you bud! Let me know if you want me to cover anything.
Awesome thanks for the help
No problem bud!
Thank you 🙏 for sharing no criticism here you did a great job well explained .now I’ll try and do mine . Great vid 😎👍🏻🤙🇬🇧U.K.
Anytime dude! Constructive criticism is welcomed! Thank you and glad to help. :)
Great video!
Thank you!
Nicely done brother, the only video that helped me.... subscribed... thanks 🙏🏻 GOD BLESS
Hope to see more videos of you explaining everything as in this video 🙏🏻👍🏻
@@josefcalderonromero8452 glad it helped! Thank you for the kind words!
Wow! Good job!
Thanks!
Thank you!
You're welcome!
buen video amigo, buenos detalles!! 😁😁😁+1
It's also useful to check your motor bearing if you are chewing gears. They need replacing often if you jump big or get them wet. A sloppy motor bearing will never mesh right.
Where’s the motor bearing?
Make sure you clean screws, greas it then put it all back together
subscribed
Thank you!
What size is the allen wrench for the set screw? Thanks
I believe it was either a 2.5 or 3mm
With pins set in correct position, does yours have that bad cogging sound? Mine is stock......... 18/54 or what ever the☝️spur is .. biggest one anyways.....that plastic housing guess has alot of flex for such a big rv truck...my outcast 8s, smooth as butter...roll tires with one finger...Xmaxx..takes 2 hands to turn all 4 wheels..both our X-Maxx's like that
This Xmaxx cogged at well but it wasn't bad. Ive long since sold the RC but it was running like new after repairs were made. I bought this thing used and busted so I got a really good deal on it.
i did this and it instantly blew apart my pinion gear, but it did work the second time
Must of been a bad pinion?
I purchased an XMaxx over the summer and went through pinions and spurs like mad. The pinion kept slipping off the shaft, leading to catastrophic destruction of the pinion and spur. I used every flavor of loc-tite in existence to no avail. It turns out, the flat spot that the grub screw would mate with was actually slightly tapered. I confirmed this by measuring it with calipers. Heat cycles would just push the pinion right off after a couple battery runs. I didn't have the tools to properly re-machine the flat, so I drilled a divot in the shaft for the grub screw to seat into when it's fully screwed down. I haven't had a problem since. The downside to this is you're likely limited to one brand of pinions, so they all have the grub screw in the same location.
Ive heard of this happening if you dont have the motor slotted into the chassis correctly. Though great idea of fixing the problem!
Thats what I did too and your right about being stuck with one brand but honestly I found one I really liked and thats all I use
@@Todd_G_FPV What brand do you use?
@@wyshtechairsoft Robinson racing but thinking of trying a arrma D bore pinion as I've heard they stay on really well. Found a 16 and 20 tooth D bore for like 5$ on ebay for both
@@Todd_G_FPV If you dont mind me asking. What gear ratio are you running?
mine did the same thing lol
The smaller the gears the faster or other way round?
Yuppers! At the sametime it increases the stress on the motor/esc.
The xmaxx has optional pinions and spurs, for the spur a smaller gear is faster, for the pinion larger is faster
6 months later, how does that gearing hold up?
Great! Haven't had any issues since I did the replacement.
How do you end up with such nasty situation to start with?
I got it as a trade with another RC for a 1/5 scale hpi I had. Anyway, I discovered the previous owner swapped the pinion gear and didnt set the motor correctly.
yes okay nice video not full the pind need on E correct what hol you need on the motor self???
It depends on the gear ratio you are going with. Move the pins to what gear set you are going with and then place your motor back into the rc on the pins. Hope this helps!
What brand is that new spur? Traxxas?
Yessir!
pff😟😟🤨🤨i need to do this too i broke my gear 54 and want do 18/46 i dont now how to set the srews i dont understand the video its my first rc car
What do you mean set the screws?
i use 18/46 and i broke on 5 sec and i set the pins on E xs i set back 18/54
no need to put grease? mate?
No grease is needed. Traxxas doesn't recommend it.
@@wyshtechairsoft ok tnx my xmaxx is 3weeks old and its truly a beast
@@rcboy4652 enjoy it! They are great trucks!
Geeezus dafq did you do on that spur, chew on it? 😂😂😂😂😂😂thats shit all fucked up!
This was a XMaxx bought used. It was a deal I couldn't pass up. haha
@@wyshtechairsoft hell yeah! Hope everything is good now. I just freakin burned my xlx2 esc today! FML, in had it on the xmaxx for a year now
@@oscarmike131 sounds like you got a good life out of it!
@@wyshtechairsoft yesh
As long as this has been an issue, you'd think traxxas would have fixed this engineering issue by now. Traxxas quality is going rapidly downhill!