For anyone still wanting to mount a 77'' G3, the TV height is 97.5cm. Your eye level when seated is roughly 110cm from the ground, so take the half of the TV (48.75cm) from that number you get 61.25cm round that up you'll have 62cm. Assuming you wall mount it, and make it look clean I'd increase that number to 65cm from the ground so you can place a nice TV console underneath (possibly 60cm in height) the TV, and still see a little bit of your wall in between, instead of keeping it 62cm from the ground, it will look like if someone wants to push the tv behind the cabinet. And you've also got enough room to place a center speaker in your TV console if it's not ported, and angle it upwards to the listeners ears. So, bottom edge of the TV 65cm from the ground, it will be very easy on your neck, the TV will be just a tiny bit higher than the middle of eye level. 65cm + full height of tv (97.5cm) = 162.5cm - 16cm (top of the TV to top of included wall bracket = 146.5cm. So you should mark your center and draw a level line at 146.5cm for the top of your wall mount bracket. Circle the holes with a thin pen at once and you can drill everything. For some with porous walls, you might want to take a wooden plank and drill an 8mm hole in it, and have someone hold it against the wall when you drill the holes with a stone drill bit, that way your drill can't slip away in the wall. You'd obviously want as tight of a fit you can get around the plug, and the included plugs are 5.5cm long so you better drill straight.
@@LuckyLuigi Thanks, another possibility I'd like to mention is to get a less tall TV console so you can put your center speaker on top of it, if you want to. I believe companies also make a TV console of 40cm in height, and high quality (horizontal) center speakers are often ~20cm in height so that also comes out to 60cm, while you'd have the bottom edge of your TV at 65cm. But not everyone wants such a short TV console. But both are valid options, inside or on top. If you place your center speaker on top of a cabinet/tv console, just make sure to move it to the front edge so you cut down on early reflections.
My bench is 42 cm, and eye level in couch seems to be about 101cm, so I think I'm gonna put it at 53 cm from the bottom, to make room for the Sonos Arc below it which is about 9cm. 77 inch, 3 meters away.@@BerserkeR_031
Hey. May I ask for some advice? I installed mine (65 G3) 70 cm from the floor due to the wife not wanting it to be 50-60 cm. Our couch is like 2.8 m (our seating/watching position) from the TV and my eye level is 5-7 cm from the TV centre (I'm 1.82 m). So a tad bit off from the guidelines "of the Internet". I'm not really sold on it yet, since we just moved in and haven't had much time to watch a few movies or try the PS 5 to calm myself down.. Just the idea of having it not "right" (my OCD) is driving me nuts. But I don't really want to drill new holes into the drywall either.. I've been thinking what if I got the Vogel's Pro PFW 6815 / Sanus VLT16 or the Sanus LL11 and used the holes of the LG wall mount (haven't yet checked if they fit). Or if 70 cm from the floor doesn't sound as bad, I might just leave it alone. Thanks.
Just bought a 55 inch LG G3, read the instructions which was total rubbish, thankfully found your video which made it so simple to follow. Like others have said LG technical department could learn a lot from yourself on how to do an easy to follow video, thank you.
Co to ma być? Na takim czymś ma być zamontowany tv ? To całe się rusza. Czy mozna zamocować do własnego uchwytu z wyciągiem do przodu obracaniem na boki góra dół?
I bought my 77" but deferred delivery while I built my media wall. Og course I didn't have the accurate dimensions for fitting plate location to build my wall with studs in the right place for the bracket, recess my bracket to get a flush fitting, build woood / led work so everything fits nicely etc. I mailed LG Customer Services (UK) with the question and they supplied a tech drawing covering all the rear fittings / dimensions / holes for the whole g3 range within 30mins!! Great service!!
I'll be using this technique from now on, lol. Thanks for the upload, my friend. Btw, idk if this new or something but these mounting kits come with like a cardboard tool you can fold into a box. It's meant to be placed in that space created between that plate the tv sits in and the bracket itself. It prevents the mount from compressing while you're trying to line up the tv, which was the biggest pain when I started mounting these tvs. I swear sometimes they're not included though, in which case we just grab a block of Styrofoam from the tv box. Just makes mounting the tv that much easier, especially when you're on a 6ft ladder mounting a 86" g3 over a fireplace, lol.
Man, you did a much better job explaining how to do this than both LG's instruction-paper and video. - I've been trying to figure it out with my dad's purchase for hours and we weren't sure how to tackle it, especially in terms of not being able to put the panel flat as LG suggests (which also worried us to break it when putting it down or picking it up from horizontally to vertically especially). But clearly, that's not even necessary and we can just pick it up and put it down up against something. - It's a bit less risky than we probably imagined. I suppose the frame-like casing of this model definitely helps with sturdiness. - Anyway, thanks for showing this in detail, cause now we can move ahead with a clearer idea of how to do it. I just wish LG made videos a bit more detailed like this. They streamline it in a very generic and almost abstract way.
My Wallmount bracket doesnt fit on the Tv. I mean, the TV enter the four holes from the bracket, but after, they dont slide to the second stage of the hole. So it doesnt lock properly. I dont know what to do anymore.
Question: I have a plug right behind the TV can the mount be pulled forward and inch or 2 to accommodate the power plug long term? or does it need to be snapped back in for long term use? thanks so much for making this. I agree with others very helpful.
Is there enough space for cables to fit behind the tv on the 65inch version? I have heard that some people need to rout cables into the wall so that the wall mount can click into place flush to the wall.
Great video, I’m about to do the same this weekend. Regarding the plug, assuming the LG power cable doesn’t have an earth, so it’s just brown and blue (or red & black) ?
The video creator states in the video it is the 65” version, within the first minute, but the measures are for the 55” version of the TV. Be mindful of that. If you do have the 65” please measure yourself. Great video nonetheless
@@TellyDan thx for the answer. I checked it already g2 and g3 seems same but g1 only has 2 hanging points. Buy might be still easy to change suce the screw places seem the same so you just change the mount
Nice job looks very professional, im just curious I bought a full motion wall mount for my tcl q7 and i returned the after having issues with the having 4 leds going on the panel i returned the tv to Best Buy my question is would there’s be better to use there wall mount
@@TellyDan it was pretty accurate for me. Even had a professional come over and give it a once over. Mounted my G2 perfectly. Perfect height, perfect position.
@@SylentONE @TellyDan I've measured it today while mounting the tv, the height (50%) was an exact match (41cm for 65"), but the width was off by 1.5cm.
@@jklasfjkl initially I thought my height was too high. But it came out perfect. I mounted the 55" G2 exactly 8" above my 77" media shelf. Any lower and it wouldn't really look like it's floating
I've got similar set up above an old fireplace. So there still enough room behind the panel so that any HDMI's power cables don't get crushed...even if they come outside of the cable management area?
What are people doing with the aerial socket? should that come out from behind the tv? or the same place as the inputs for the hdmis - same with the power/plug.
Sometimes I remove the aerial plate and couple the wire directly to get it tight to the wall, power plug you could do a fused spur outlet but you'd have to chop the plug off.
@@davem68 Just depends how bright they want it to be. But then, that one might try to make the actual OLED itself bright and thus be a bit more prone to retention or even burn-out. - So yea, I would think the MLA would help in that regard, helping prevent that a bit.
Hi, Great video! Just bought a 65g3. Would you have the exact distance between the top of the Tv and the top of the wall mount that will be fixed into the wall? Thanks!
I need to know this too, have a floating wall and the mount I dont think I could have flush on the floating wall as dont think it would be strong enough, so only option is to cut a hole in the floating wall and then mount the mount directly on solid wall, but then the tv would never be FLUSH with the mount and worried if it will be an issue
Is it easy to take the tv back off the wall mount? We want to buy the tv but in two months the painter will start and we are wondering if we can already install it and take it away easily during that time?
I believe you can use a standard VESA bracket, but if you use a normal bracket, you might as well get a C3 model a the whole selling point (yes also slightly higher brightness) is the gallery model, flat against the wall, which you will only achieve with the included bracket.
That's a heck of a lot of holes to drill in my wall. Especially for a proprietary mounting bracket specifically for 1 TV. All nice and well until years later when you want to replace the thing.
Quick question. Can I attach this included wall mount bracket to the brackets of another wall mount base? I have this entertainment set which is a 2 levels glass desk with two support bars which end in a tv base with vesa brackets. Can I attach this tv bracket to that vesa arms? Using bolt and nuts?
I fitted a 77" in a customer's house on Tuesday. None of us were happy with the bracket. There is no tilt on the LG bracket. Also, like you see at 3:23 in the video, there's a lot of play in the bracket so it's too easy for the TV to get knocked out of level. Whoever designed the bracket has never spent any time actually talking to TV installers.
What do you think ? Is it possible that i can use this wall Mount and Not pushing it completely to the wall? So that the tv has more Space between the wall und itself for using a Philips hue gradient tv lightstrip.
Thank you. I have a question: once installation is done, it seemed that the TV was not stable (swinging vertically) when it was oriented to a different view angle (not parallel to the wall). Is it sturdy enough?
For anyone still wanting to mount a 77'' G3, the TV height is 97.5cm. Your eye level when seated is roughly 110cm from the ground, so take the half of the TV (48.75cm) from that number you get 61.25cm round that up you'll have 62cm. Assuming you wall mount it, and make it look clean I'd increase that number to 65cm from the ground so you can place a nice TV console underneath (possibly 60cm in height) the TV, and still see a little bit of your wall in between, instead of keeping it 62cm from the ground, it will look like if someone wants to push the tv behind the cabinet. And you've also got enough room to place a center speaker in your TV console if it's not ported, and angle it upwards to the listeners ears.
So, bottom edge of the TV 65cm from the ground, it will be very easy on your neck, the TV will be just a tiny bit higher than the middle of eye level.
65cm + full height of tv (97.5cm) = 162.5cm - 16cm (top of the TV to top of included wall bracket = 146.5cm. So you should mark your center and draw a level line at 146.5cm for the top of your wall mount bracket. Circle the holes with a thin pen at once and you can drill everything. For some with porous walls, you might want to take a wooden plank and drill an 8mm hole in it, and have someone hold it against the wall when you drill the holes with a stone drill bit, that way your drill can't slip away in the wall. You'd obviously want as tight of a fit you can get around the plug, and the included plugs are 5.5cm long so you better drill straight.
This is excellent advice, thanks
@@LuckyLuigi Thanks, another possibility I'd like to mention is to get a less tall TV console so you can put your center speaker on top of it, if you want to. I believe companies also make a TV console of 40cm in height, and high quality (horizontal) center speakers are often ~20cm in height so that also comes out to 60cm, while you'd have the bottom edge of your TV at 65cm.
But not everyone wants such a short TV console. But both are valid options, inside or on top. If you place your center speaker on top of a cabinet/tv console, just make sure to move it to the front edge so you cut down on early reflections.
My bench is 42 cm, and eye level in couch seems to be about 101cm, so I think I'm gonna put it at 53 cm from the bottom, to make room for the Sonos Arc below it which is about 9cm. 77 inch, 3 meters away.@@BerserkeR_031
Hey. May I ask for some advice? I installed mine (65 G3) 70 cm from the floor due to the wife not wanting it to be 50-60 cm. Our couch is like 2.8 m (our seating/watching position) from the TV and my eye level is 5-7 cm from the TV centre (I'm 1.82 m). So a tad bit off from the guidelines "of the Internet". I'm not really sold on it yet, since we just moved in and haven't had much time to watch a few movies or try the PS 5 to calm myself down.. Just the idea of having it not "right" (my OCD) is driving me nuts. But I don't really want to drill new holes into the drywall either.. I've been thinking what if I got the Vogel's Pro PFW 6815 / Sanus VLT16 or the Sanus LL11 and used the holes of the LG wall mount (haven't yet checked if they fit). Or if 70 cm from the floor doesn't sound as bad, I might just leave it alone. Thanks.
Just bought a 55 inch LG G3, read the instructions which was total rubbish, thankfully found your video which made it so simple to follow. Like others have said LG technical department could learn a lot from yourself on how to do an easy to follow video, thank you.
Thank you, glad it helped. I found the lg instructions a big faff
Co to ma być? Na takim czymś ma być zamontowany tv ? To całe się rusza. Czy mozna zamocować do własnego uchwytu z wyciągiem do przodu obracaniem na boki góra dół?
I bought my 77" but deferred delivery while I built my media wall. Og course I didn't have the accurate dimensions for fitting plate location to build my wall with studs in the right place for the bracket, recess my bracket to get a flush fitting, build woood / led work so everything fits nicely etc. I mailed LG Customer Services (UK) with the question and they supplied a tech drawing covering all the rear fittings / dimensions / holes for the whole g3 range within 30mins!! Great service!!
I'll be using this technique from now on, lol. Thanks for the upload, my friend. Btw, idk if this new or something but these mounting kits come with like a cardboard tool you can fold into a box. It's meant to be placed in that space created between that plate the tv sits in and the bracket itself. It prevents the mount from compressing while you're trying to line up the tv, which was the biggest pain when I started mounting these tvs. I swear sometimes they're not included though, in which case we just grab a block of Styrofoam from the tv box. Just makes mounting the tv that much easier, especially when you're on a 6ft ladder mounting a 86" g3 over a fireplace, lol.
Yeah I did the cardboard fold thing on my 65g2 at home
Very helpful. Much better than the instructions provided by LG or any other video
Thank you, I did read the instructions first then thought this way was far easier.
Man, you did a much better job explaining how to do this than both LG's instruction-paper and video. - I've been trying to figure it out with my dad's purchase for hours and we weren't sure how to tackle it, especially in terms of not being able to put the panel flat as LG suggests (which also worried us to break it when putting it down or picking it up from horizontally to vertically especially). But clearly, that's not even necessary and we can just pick it up and put it down up against something. - It's a bit less risky than we probably imagined. I suppose the frame-like casing of this model definitely helps with sturdiness. - Anyway, thanks for showing this in detail, cause now we can move ahead with a clearer idea of how to do it. I just wish LG made videos a bit more detailed like this. They streamline it in a very generic and almost abstract way.
Thank you for that, glad it helped and all the best with your installation
My Wallmount bracket doesnt fit on the Tv.
I mean, the TV enter the four holes from the bracket, but after, they dont slide to the second stage of the hole. So it doesnt lock properly.
I dont know what to do anymore.
Thank you for making in-detail installation. This was informative
Question: I have a plug right behind the TV can the mount be pulled forward and inch or 2 to accommodate the power plug long term? or does it need to be snapped back in for long term use?
thanks so much for making this. I agree with others very helpful.
Is there enough space for cables to fit behind the tv on the 65inch version? I have heard that some people need to rout cables into the wall so that the wall mount can click into place flush to the wall.
Thanks for the guide.i will use washers on my install lol
Can you leave the TV extended once fitted? Or does it only support flush to wall ? Thanks
Did you find out if it can be extended or if it has to be pushed against the wall?
same worry for me, did you find out?
@@RonaldMcMartindid anyone find out
Great video, I’m about to do the same this weekend. Regarding the plug, assuming the LG power cable doesn’t have an earth, so it’s just brown and blue (or red & black) ?
How far does the bracket/TV extend from the wall?
The video creator states in the video it is the 65” version, within the first minute, but the measures are for the 55” version of the TV.
Be mindful of that. If you do have the 65” please measure yourself.
Great video nonetheless
Mh G3 TV is mounted on the wall, and I wanted to pull it away from the wall to connect HDMI as it is flush against it, how can I do that?
Please can you explain why the plywood panel was mounted first? Is this the 55 inch version as seems one person can fit? Tks
Giving a like as I needed the levelling tip!
I have a g1 65 mounted on the wall is the wall mount the same so if I decide to upgrade to a 65 g3 I just need to switch the tvs?
I think so, I definitely haven't seen any difference between the g2 and g3 pretty sure the g3 was the same bracket as well
@@TellyDan thx for the answer. I checked it already g2 and g3 seems same but g1 only has 2 hanging points. Buy might be still easy to change suce the screw places seem the same so you just change the mount
Thank you for sharing this. Super appreciated!
My pleasure!
@@TellyDan Hello i wanted to ask would it be fine to connect a tv to a plug extension?
Nice job looks very professional, im just curious I bought a full motion wall mount for my tcl q7 and i returned the after having issues with the having 4 leds going on the panel i returned the tv to Best Buy my question is would there’s be better to use there wall mount
The template is very helpful.
All you need is blue painters tape to hold it while you mark your position
Nah its rubbish and not accurate, if it was the specific size for the tv it would be better
@@TellyDan it was pretty accurate for me.
Even had a professional come over and give it a once over.
Mounted my G2 perfectly. Perfect height, perfect position.
@@SylentONE @TellyDan I've measured it today while mounting the tv, the height (50%) was an exact match (41cm for 65"), but the width was off by 1.5cm.
@@jklasfjkl initially I thought my height was too high. But it came out perfect. I mounted the 55" G2 exactly 8" above my 77" media shelf.
Any lower and it wouldn't really look like it's floating
That's interesting and bad at the same time, the template really should be at least within 5mm
I've got similar set up above an old fireplace. So there still enough room behind the panel so that any HDMI's power cables don't get crushed...even if they come outside of the cable management area?
Great video and really helpful, thanks!
Hey! Greay video, what is the difference in cm between the holes of the wall mount where the lugs are supposed to go in?
What are people doing with the aerial socket? should that come out from behind the tv? or the same place as the inputs for the hdmis - same with the power/plug.
Sometimes I remove the aerial plate and couple the wire directly to get it tight to the wall, power plug you could do a fused spur outlet but you'd have to chop the plug off.
This video was super helpful. I’ve got the same size G3 and your measurements were spot on! Thank you.
Thankyou
hey, is this bracket included with the TV itself or do you need to buy it additionally?
Is the Lg wall mount from G3 same as the one from Lg G2?
Yes
Hey mate how many walls are mdf ?They are plaster board or brick.. Do it in reality ...
mate.. This is not a normal fit...
I have done the same job in reality at my house with a brick wall, 65g2 oled wall mount. It's pretty much the same. Good tv as well
Is it worth buying the 83-inch g3 to watch sports and play video games?
No, the 83” G3 does not have MLA, either get the G2 or C3 in 83” size.
@@davem68 Just depends how bright they want it to be. But then, that one might try to make the actual OLED itself bright and thus be a bit more prone to retention or even burn-out. - So yea, I would think the MLA would help in that regard, helping prevent that a bit.
What is the distance between the furthest mounting holes please.
Do you have to push it all the way back or can you leave the bracket extended abit eg to accommodate not having a sunken in socket
Yes you can leave it pulled out slightly to accommodate what's behind it
Hi,
Great video!
Just bought a 65g3.
Would you have the exact distance between the top of the Tv and the top of the wall mount that will be fixed into the wall?
Thanks!
I did a video on the g2, pretty sure it's exactly the same wall mount and locations on the tv
Thank you very much! Saw it ;-)
@@ThibaudB.-re3gh hope it helps mate
@@TellyDan indeed it helped, the measure was the same (97mm). Thanks!
Brilliant thought it should be the same, the bracket and tv casing have been the same for a few years which is good
Will it be okay if the TV is not flush on the wall in the long term?
I need to know this too, have a floating wall and the mount I dont think I could have flush on the floating wall as dont think it would be strong enough, so only option is to cut a hole in the floating wall and then mount the mount directly on solid wall, but then the tv would never be FLUSH with the mount and worried if it will be an issue
@@RonaldMcMartinyea, but already has a hole but it is slightly smaller than the tv :(
It doesn't ha e to click back flat, it looks nicer flush but it's not always possible and won't affect safety
@@TellyDan Okay that is good to know, we couldnt click it to fit in the cavity. The mount should be okay as well?
Screw size do you use to fixe wall mount on the wood?
Is it softwood or hardwood u use, what thickness?
No wonder the TVs are warping, fuckong hell, physics' LG, 🤯
Metric System ftw!!!
😎
Is it easy to take the tv back off the wall mount? We want to buy the tv but in two months the painter will start and we are wondering if we can already install it and take it away easily during that time?
Looks like you just unclip and raise it out
Would I be able to use my previous standard bracket to put it up? Or is this tv specifically designed for this bracket to he used
I believe you can use a standard VESA bracket, but if you use a normal bracket, you might as well get a C3 model a the whole selling point (yes also slightly higher brightness) is the gallery model, flat against the wall, which you will only achieve with the included bracket.
What size is Tv in presentation?
55
That's a heck of a lot of holes to drill in my wall. Especially for a proprietary mounting bracket specifically for 1 TV.
All nice and well until years later when you want to replace the thing.
That's 6 holes and he did the bare minimum. Don't mount ur tv if ur afraid of holes.
Tiktok tiktok waiting for samsung oled S95C..
Can the wall mount safely stay unfolded like at 1:49? I have a thermostat in the way on that wall and wouldn't be able to have the TV completely flush
Did you ever find out the answer? Was planning on getting one but would need it to stick out a bit
@@danieltilly167I still haven’t!
You a GOD!!! СПАСИБО!
Thank you, wish my Mrs thought the same 😆
Quick question. Can I attach this included wall mount bracket to the brackets of another wall mount base? I have this entertainment set which is a 2 levels glass desk with two support bars which end in a tv base with vesa brackets. Can I attach this tv bracket to that vesa arms? Using bolt and nuts?
Would also like to know thia
can it be tilted to face down at an angle?
I fitted a 77" in a customer's house on Tuesday. None of us were happy with the bracket. There is no tilt on the LG bracket. Also, like you see at 3:23 in the video, there's a lot of play in the bracket so it's too easy for the TV to get knocked out of level. Whoever designed the bracket has never spent any time actually talking to TV installers.
Hi Dan what size G3 was that one is it the 55 or the 65. Thanks
55! Thanks, I just read the other comments
Yeah 55, I did the 65g2 at Mt House last year, same process though
What do you think ? Is it possible that i can use this wall Mount and Not pushing it completely to the wall? So that the tv has more Space between the wall und itself for using a Philips hue gradient tv lightstrip.
Hey, I just asked myself the same question because I also have the same problem. Can you leave the TV extended a little or not?
Did you ever find out the answer?
Unfortunatelly Not yet
Can the tv angle be adjusted? As in can i turn it or is it a fixed position
Meant to be flush mount (I.e. no tilt)
Does the wall mount bracket come with the tv or purchased separately? If purchased separately what model number to order the bracket?
It comes with the tv!
Thank you.
I have a question: once installation is done, it seemed that the TV was not stable (swinging vertically) when it was oriented to a different view angle (not parallel to the wall). Is it sturdy enough?
Does anyone have the new measurements for the G4?
I do
czcams.com/video/1oWbC1QAibM/video.htmlsi=Xuh3O4ZuYasqzLBH
@@TellyDan You're amazing. Exactly the information I needed. Thanks!
@@nybiggs glad it helped
Next samsung oled S95C..
Lovely!
Waiting for Samsung S95c
Nice video, But technically per code you can’t run cords thru walls then plug in to an outlet.
I was thinking the same thing then realized he’s in the UK. Been looking for a code compliant way of running the power with the TV being flush.
@@fernandodominguez753would need a recessed power box in just the right spot
@@jjoncm1too much cable, TV wont stay flat against the wall if the cable is between the TV and wall even with the recessed power outlet.
i germany you should be jobless...hehe
Give us a job mate
🕰 waiting review for samsung oled s95c..