Dude, leaving the ozone generator in the confine space for 18hrs is too long. About 1hrs should do the job...leave it in there too long and it may deteriorate your components.
I was a little nervous watching him breathe in that ozone while it was turned on - especially after it was complete and he opened the doors so all the fumes could get in his lungs. I have this machine and used it on my car for 30 minutes and it worked great. I then aired it out for several hours and kept my face away from it. No need for a 24 hour run time.
You can breath ozone but need a medical grade generator and oxygen and an apparatus to bubble it thru olive oil.. It will kill any pathogens in the lungs...
@@foxmulder7616 Stop giving people dangerous advice. Ozone, O3, will oxidize your lungs. It does not discriminate between pathogens or your lung tissue.
You can inhale a bit of ozone. It's fine. People don't get lung cancer when a lightning strikes nearby and generates a lot of ozone. You don't want to have prolonged exposure to it but if you need to run in there and turn off the machine in a minute or two, you're going to be just fine.
You forgot to do the most important thing....starting the vehicle to allow the vehicle’s a/c system (in recirculated mode) to draw in the ozone into all a/c ducting to kill all hidden mold spores.
@@annfox2063 So, when you switch on the a/c blower, it’ll blow out all the hidden spores and bacteria, and recontaminate the entire interior. Waste of time.
You need to dry it up first before Ozoning it. Low humidity allows the generator to work best and last. High humidity interferes with operation and is rough on ozonizers plates. (unless you have a UV light type ozonizer ) not a bad idea to run your a/c for a little while as you ozonize
I've used a home dehumidifier and pulled an amazing amount of water out of my x-fire. I feel that this worked better than my previous dry out go to... Moving a propane salamander around to different positions and a fan further moving hot air around.
You need to set it up on a lil basket or something you want the center console surface to get hit also. Then you put the car fan on recycle to get the cabin filter and inside of the duct work. Finally, change seats up and then down in different positions so it gets all the fabric. Way too dangerously long to leave it continuously running in such a confined space for that long.
Question. If the machine takes ambient oxygen and turns it into O3 or “Ozone”, what happens if you leave it in the closed car where the Oxygen supply is minimal
In that case the system becomes ineffective since it just keep using the O3 over and over again. The generator needs fresh O2 to passed thru the plate and turns its to O3 so at least if he runs it for 18hrs, he could've crack the windows.
The supply of oxygen will get "used up" and that is what will kill the living beings, i.e. lack of oxygen. 18 hours without oxygen should kill a lot of things. This is when you keep the ozone machine in the car. You should get some oxygen seeping into the car through cracks but the machine promptly makes Ozone out of it, keeping the oxygen concentration low. Additionally as Ozone is unstable it will react and release the stable Oxygen, which again gets converted to Ozone by the machine. The overall supply of Oxygen is limited so it is correct that the overall supply of Ozone is also limited. However the kill factor of starving all living mold of oxygen is a plus in this method.
I think the best practice would be: Run it 30/60 minutes with AC on recycle. Run in 30 min with AC without recycle on. Let the car air 30 minutes with your A/C on taking air from outside. Run it again with the AC off, for another 30/60 minutes. Let the car air out an hour. Done. This way you use it enough time to kill bacteria, but then you go over it again with fresh O2, to make the machine work efficiently. Ideally, the best way of doing this is with the machine outside and a pipe pumping the O3 in. But most of us won´t spend such money on the more expensive machines... of course. SO I think it is best to do it in phases, where you bring new O2 in. Might take longer, but sounds more efficient. IF there is no O2, you can not produce new O3. Now, cars are not perfectly sealed so some O2 will always come by..
The ozone breaks back down to oxygen o3 --> o2 when it comes into contact with organic matter. You will not run out of o2 if there is still living mold in there. This isnt a issue.
I do have a couple that I let run all the time in my motorhome when it is stored but I do not thing they will work on a car that you would like to smell good in any reasonable amount of time.
10,000 mg/hr is overkill for a car, but I guess you got it for your properties (one room at a time) 2birds right! So I bought a smokers car and I’m a smoker too, but my other cars don’t smell like an ashtray gang in prison because: 1- Never turn on HVAC while smoking. If -35Celcius cold, position vent to feet and fan on medium-Low. Never AC smoke or Re-Circulate while smoking NEVER. 2- crack only 1 window 5cm to achieve vacuum effect. 3- keep cig hand close to window crack, keep one eye on the cherry and one hand at the wheel. 4- ash & butt out the window then roll down all 4 windows to clear smell. 5- Quit if you can, if not vape in the car. Here’s what I did to neutralize smell: A) HVAC Evap/Core Foam cleaning: Musty odor smell is typically due to bad filter or clogged drain. Always use charcoal (carbon activated) filter replace as needed. Second most common reason is Mold/Mildew in HVAC evap/core. I used nose hose from dealer kit ($50/kit) and then started buying AC SAFE NO RINSE foaming rad evap condenser cleaner from HomeDepot/Hardware Lowes Rona etc. $10/bottle. MUST be NO RINSE. Locate Evap drain pipe under car (can also inject from blower motor/cabin filter opening or through front centre vents) but the drain pipe is the most effective. 1-Turn OFF car, wear PPE get under and shove pointy nose hose into Evap drain pipe and 2- depress bottle empty half can, 3- then leave drain plugged & wait 20 min for foam to expand into as much HVAC core surface area as possible after which foam liquifies and drains by gravity, unplug and let it drain (use clean catch pan so you can see & assess the dirt) repeat steps 1-3 to remaining foam bottle. 4- Then turn ON car, roll up windows, set HVAC fan (or AC) on RE-CIRC & HIGH let run for 20 min. 5- Then, turn OFF AC (compressor) leaving FAN on HIGH & Roll down windows to air out the disinfecting foaming detergent. Although it smells great, it’s not something you should inhale: it’s NOT an air freshener.[also chemicals btw] A-1) Air Intake Cleaning: 1-Turn on car HVAC on FRESH-AIR with AC (compressor) ON fan on HIGH, vent open to FACE only. Roll up all windows and close doors. 2- Locate cabin air-intake found under wiper arms & above firewall (usually passenger side) 3- Use Lysol or Dealer or other similar spray disinfectant onto intake thoroughly and generously (45 second intervals) Each interval switch to FEET only then DEFROST only, until the bottle empties 4- let it run its course for 20 min. FACE & FEET & DEFROST Equally. 5- turn OFF AC (compresser) keep FAN ON HIGH & roll down all windows, take a drive to force more air through intake & out windows. B) Armour All or similar vent & duct cleaning: Just like above (A-1) section but through vents. 1- Locate all vents (Defrost Dash vents by windshield) floor foot vents (Front & rear) FACE vents. 3- Turn OFF car 4- Spray contents through attached straw in each vent. Let straw spray through vents into ducts. 5- wait 20 min 6- Windows UP run FAN only on HIGH & RE-CIRCULATE for 20 min- I don’t see the point of running the compressor. 7- Windows DOWN keep fan running on FRESH-AIR mode and take a drive to air out car further. It might smell nice but it’s still not for inhalation, it supposed to clean & disinfect HVAC. (This Armour All is also a foamy solution, not to be confused with EVAP foam, it’s a much milder solution that doesn’t expand as well and isn’t enough quantity for an Evap job) C) clean carpets, seats, headliner & other fabrics. 1- Steam. 2- Shampoo 3- Hot water Extractor. Note- Be careful with headliner adhesive. This should REMOVE some smoke odour source. WAIT & smell, if 1-6 days passed & no difference (ask others who don’t ride that car often) if they can still sense a lingering soft smoke smell then move to step D. You can also move to D if you can visibly smell it or you like to try all. D) OZONE treatment: Don’t Use OZONE O3 near: >People | Pets | Plants >Directly after carpet cleaning or detailing car or the above Evap Vents & Ducts steps, O3 neutralizes all odours good or bad as well any gaseous state matter. Prolonged exposure will oxidize solid state matter. O3 (unstable/reactive) = O2 (stable Oxygen gas) + O (elemental oxygen) Elemental Oxygen gas high electron affinity & will strip/steal electrons from other atoms by forming stronger covalent bonds which destroys existing bonds of odour causing gases (bad scents) hence that’s how it neutralizes odours. It does the same to our esophagus & lungs as well as metals & vinyl etc. 1- Hide metals (seat belts buckled in, head rest metal/chrome etc) 2-Turn ON HVAC fan to HIGH on RE-CIRC set on high HEAT. (Hot air rises) 3- Position OZONE GEN near headliner (use bungie cords through the OZONE Gen handles and rear seat arm supports) O3 is denser than O2 H2 N2 and other gases in our atmosphere (air in the car) so it ozone sinks to bottom. Plug in a fixed fan along with car vent heat should do the trick. 4- preset 10-30 min depending on odour severity. Close all doors / windows and run. Do in intervals if required more than 30 min. For example: 4-30 min treatments instead of a solid 2 hours. 5- preset Ozone Gen 30 min. Wait another 30 min (oxidation reaction time), roll down windows, doors & set FRESH-AIR mode for 60 min (Treatment + ‘cure’ time) Ozone has a strong lingering smell. Air out for 2 or more hours if you have to. Drive on highway if you have to. Finally, If that still didn’t work & you and other still smell smoke odour, then pay $350-850 for professional detailer with warranty and fumigation guarantee. If that still didn’t work sell the car. If you can’t sell due to odour, then start smoking in the car and the scent will be unnoticeable by your 3rd pack. 😝
You would not want to be in there to clean it up before killing as much as you could with the ozone generator first. I drive this Land Rover all the time now it worked great.
@@ThisWeekWithCars Thank you for this tried and true test. Did you ever have to hit it with the ozone generator one more time, to kill off any hidden spores - like deep in cracks and crevices and such?
Depend how bad the car is. In a car filled with mice and mold, once over night wasn’t enough but for a car that people have been driving 30-60 min would do it.
For 1 or 2 hrs fine, but for so long like this clueless guy in the video yes it can definitely degrade bonds in glued surfaces, especially if made with natural rubber. will then lead to creaks and rattles and cosmetic issues
That's not the right way to do it. You need to clean the car first and eliminate the source of mold and smell. And when you turn on the ozone generator , you must never breath it while it's on. Close the car and let it run for an hour or so and let it rest fir some time. Finally open all car doors and let a fresh air in.
Every Land Rover Discovery 2 has the sunroof downspout broken off, the water will get on the interior roof and start making its way to the headliner material - then the whole car starts to smell like a wet dog .. no offense to dogs. that is when an ozone generator becomes indispensable...
i could start arguing here but dont want to - i drive a 2001 land rover discovery 2, 2002 Toyota Tacoma 4x4, a 2020 Kia Soul GTLine - turbo (my wife's) and my daily driver a Volvo S60 - there is no car other than the Land Rover that gives me so much fun driving it AND i can keep my hat on sitting inside!
@@jean-pierrescherer8250 I'm very happy for you. I have a really expensive Mercedes coupe, hardtop convertible...I have people tell me all the time it's a money pit. The thing is...I know how to work on the car. I don't need a mechanic. So if you can twist some wrenches and know things about engines...It's a whole other world. So God bless. I'm glad you like your Rover...
I suppose if you only have it in there for 30 min, but if you run it all weekend it will get into everywhere. I don't think you understand the smell that was in this truck from years of hundreds of mice.
Afterwords just turn off by the plug. Then open all door’s including the ( trunk,boot ) and get the hell out of there. The fumes toxic to humans, and so just let it air out for a couple of hours to just make extra sure. Then remove the ozone generator and disconnect & set the switch to off. Microfibre cloth and a decent cleaner that also kill’s germs is needed. Clean the machine and the handle, but do not forget the power lead & the extension lead that you have used. This is just me but i do this clean over as I do not know when will be the next time I will use it. OVERKILL MAKE UP SOME PERMANENT SIGNS UP AND LAMINATE ( DANGEROUS AREA DO NOT ENTER OZONE GENERATOR AT WORK ) ATTACH A SIGN TO THE WORKSHOP / GARAGE DOOR AND TO THE DRIVERS DOOR AND OTHER ENTRANCE’S. This is over kill but at least you have warning signs to stop, say family member’s play in the garage or if you have staff it cover’s you & make’s sure that your workforce is safe. Ozone generator’s can be replaced, BUT decent hard working staff who have built your business with you can not always be replaced so easily.
Dude, leaving the ozone generator in the confine space for 18hrs is too long. About 1hrs should do the job...leave it in there too long and it may deteriorate your components.
True. It also matters the size and capacity of the ozone generator
What about a portable /small one ? I have no power source near vehicle..?
Saw some for like $15.
I think the LR interior is past "Caring". I had to leave an ozone lamp in my Ram truck for 2 days to deodourise it from a cigarette smoker.
Nothing wrong with making sure.. especially with this old rig ..
I was a little nervous watching him breathe in that ozone while it was turned on - especially after it was complete and he opened the doors so all the fumes could get in his lungs. I have this machine and used it on my car for 30 minutes and it worked great. I then aired it out for several hours and kept my face away from it. No need for a 24 hour run time.
You can breath ozone but need a medical grade generator and oxygen and an apparatus to bubble it thru olive oil.. It will kill any pathogens in the lungs...
@@foxmulder7616 Stop giving people dangerous advice. Ozone, O3, will oxidize your lungs. It does not discriminate between pathogens or your lung tissue.
@@foxmulder7616 Don’t do that. You’ll die.
You can inhale a bit of ozone. It's fine. People don't get lung cancer when a lightning strikes nearby and generates a lot of ozone. You don't want to have prolonged exposure to it but if you need to run in there and turn off the machine in a minute or two, you're going to be just fine.
@@antonio97b Not when it is in such high levels. He didn't even leave it to convert back to oxygen. Literally went in wile it was still pumping
You forgot to do the most important thing....starting the vehicle to allow the vehicle’s a/c system (in recirculated mode) to draw in the ozone into all a/c ducting to kill all hidden mold spores.
He said in the beginning of the video that he couldn't get it running
More importantly, he forgot to clean the interior before he ran the generator.
and stir up the myxotoxins no
@@annfox2063
So, when you switch on the a/c blower, it’ll blow out all the hidden spores and bacteria, and recontaminate the entire interior. Waste of time.
@@as680783 Eh Ozone, clean, then ozone again sounds like a good flow to me!
You need to dry it up first before Ozoning it. Low humidity allows the generator to work best and last. High humidity interferes with operation and is rough on ozonizers plates. (unless you have a UV light type ozonizer ) not a bad idea to run your a/c for a little while as you ozonize
I've used a home dehumidifier and pulled an amazing amount of water out of my x-fire. I feel that this worked better than my previous dry out go to... Moving a propane salamander around to different positions and a fan further moving hot air around.
How to dry it out? I have white mold on my soft top how do I dry it out?
You need to set it up on a lil basket or something you want the center console surface to get hit also. Then you put the car fan on recycle to get the cabin filter and inside of the duct work. Finally, change seats up and then down in different positions so it gets all the fabric. Way too dangerously long to leave it continuously running in such a confined space for that long.
I agree! For leaving that long in the vehicle, the next time he touch the Knob it just crumble on him. Hahaha...too dramatic but true if over used.
Bro you are not supposed to breathe that.
Its the black mold that you really got to worry about.
Man was taking deep breath’s of the stuff after literally saying it’s harmful
Ya and? It's like saying paint fumes are harmful and taking a breath... Not going to kill ya or harm you much at all
Question. If the machine takes ambient oxygen and turns it into O3 or “Ozone”, what happens if you leave it in the closed car where the Oxygen supply is minimal
In that case the system becomes ineffective since it just keep using the O3 over and over again. The generator needs fresh O2 to passed thru the plate and turns its to O3 so at least if he runs it for 18hrs, he could've crack the windows.
@@oppvaskbjorn I think he meant he could have cracked AKA rolled down the windows just a bit to get fresh air in to the O3 Generator
The supply of oxygen will get "used up" and that is what will kill the living beings, i.e. lack of oxygen. 18 hours without oxygen should kill a lot of things. This is when you keep the ozone machine in the car. You should get some oxygen seeping into the car through cracks but the machine promptly makes Ozone out of it, keeping the oxygen concentration low. Additionally as Ozone is unstable it will react and release the stable Oxygen, which again gets converted to Ozone by the machine.
The overall supply of Oxygen is limited so it is correct that the overall supply of Ozone is also limited. However the kill factor of starving all living mold of oxygen is a plus in this method.
I think the best practice would be:
Run it 30/60 minutes with AC on recycle.
Run in 30 min with AC without recycle on.
Let the car air 30 minutes with your A/C on taking air from outside.
Run it again with the AC off, for another 30/60 minutes.
Let the car air out an hour.
Done.
This way you use it enough time to kill bacteria, but then you go over it again with fresh O2, to make the machine work efficiently.
Ideally, the best way of doing this is with the machine outside and a pipe pumping the O3 in. But most of us won´t spend such money on the more expensive machines... of course. SO I think it is best to do it in phases, where you bring new O2 in.
Might take longer, but sounds more efficient. IF there is no O2, you can not produce new O3. Now, cars are not perfectly sealed so some O2 will always come by..
The ozone breaks back down to oxygen o3 --> o2 when it comes into contact with organic matter. You will not run out of o2 if there is still living mold in there. This isnt a issue.
Do i need to buy any ozone for this or do most machines come with ozone supply already?
It makes it's own ozone just plug it in and turn it on.
Damn those Hurricane specials. Lol
Thank you sir, mine just arrived and trying it out.
What about a portable /small ozone cleaner ? I have no power source near vehicle..?
Saw some for like $15.
I do have a couple that I let run all the time in my motorhome when it is stored but I do not thing they will work on a car that you would like to smell good in any reasonable amount of time.
@@ThisWeekWithCars Thanks -- Good adviice
10,000 mg/hr is overkill for a car, but I guess you got it for your properties (one room at a time) 2birds right!
So I bought a smokers car and I’m a smoker too, but my other cars don’t smell like an ashtray gang in prison because: 1- Never turn on HVAC while smoking. If -35Celcius cold, position vent to feet and fan on medium-Low. Never AC smoke or Re-Circulate while smoking NEVER. 2- crack only 1 window 5cm to achieve vacuum effect. 3- keep cig hand close to window crack, keep one eye on the cherry and one hand at the wheel. 4- ash & butt out the window then roll down all 4 windows to clear smell. 5- Quit if you can, if not vape in the car.
Here’s what I did to neutralize smell:
A) HVAC Evap/Core Foam cleaning:
Musty odor smell is typically due to bad filter or clogged drain. Always use charcoal (carbon activated) filter replace as needed. Second most common reason is Mold/Mildew in HVAC evap/core. I used nose hose from dealer kit ($50/kit) and then started buying AC SAFE NO RINSE foaming rad evap condenser cleaner from HomeDepot/Hardware Lowes Rona etc. $10/bottle. MUST be NO RINSE. Locate Evap drain pipe under car (can also inject from blower motor/cabin filter opening or through front centre vents) but the drain pipe is the most effective.
1-Turn OFF car, wear PPE get under and shove pointy nose hose into Evap drain pipe and 2- depress bottle empty half can, 3- then leave drain plugged & wait 20 min for foam to expand into as much HVAC core surface area as possible after which foam liquifies and drains by gravity, unplug and let it drain (use clean catch pan so you can see & assess the dirt) repeat steps 1-3 to remaining foam bottle. 4- Then turn ON car, roll up windows, set HVAC fan (or AC) on RE-CIRC & HIGH let run for 20 min. 5- Then, turn OFF AC (compressor) leaving FAN on HIGH & Roll down windows to air out the disinfecting foaming detergent. Although it smells great, it’s not something you should inhale: it’s NOT an air freshener.[also chemicals btw]
A-1) Air Intake Cleaning:
1-Turn on car HVAC on FRESH-AIR with AC (compressor) ON fan on HIGH, vent open to FACE only. Roll up all windows and close doors.
2- Locate cabin air-intake found under wiper arms & above firewall (usually passenger side)
3- Use Lysol or Dealer or other similar spray disinfectant onto intake thoroughly and generously (45 second intervals)
Each interval switch to FEET only then DEFROST only, until the bottle empties
4- let it run its course for 20 min. FACE & FEET & DEFROST Equally.
5- turn OFF AC (compresser) keep FAN ON HIGH & roll down all windows, take a drive to force more air through intake & out windows.
B) Armour All or similar vent & duct cleaning:
Just like above (A-1) section but through vents.
1- Locate all vents (Defrost Dash vents by windshield) floor foot vents (Front & rear) FACE vents.
3- Turn OFF car
4- Spray contents through attached straw in each vent. Let straw spray through vents into ducts.
5- wait 20 min
6- Windows UP run FAN only on HIGH & RE-CIRCULATE for 20 min- I don’t see the point of running the compressor.
7- Windows DOWN keep fan running on FRESH-AIR mode and take a drive to air out car further.
It might smell nice but it’s still not for inhalation, it supposed to clean & disinfect HVAC. (This Armour All is also a foamy solution, not to be confused with EVAP foam, it’s a much milder solution that doesn’t expand as well and isn’t enough quantity for an Evap job)
C) clean carpets, seats, headliner & other fabrics. 1- Steam. 2- Shampoo 3- Hot water Extractor. Note- Be careful with headliner adhesive. This should REMOVE some smoke odour source.
WAIT & smell, if 1-6 days passed & no difference (ask others who don’t ride that car often) if they can still sense a lingering soft smoke smell then move to step D. You can also move to D if you can visibly smell it or you like to try all.
D) OZONE treatment:
Don’t Use OZONE O3 near:
>People | Pets | Plants
>Directly after carpet cleaning or detailing car or the above Evap Vents & Ducts steps, O3 neutralizes all odours good or bad as well any gaseous state matter. Prolonged exposure will oxidize solid state matter.
O3 (unstable/reactive) = O2 (stable Oxygen gas) + O (elemental oxygen)
Elemental Oxygen gas high electron affinity & will strip/steal electrons from other atoms by forming stronger covalent bonds which destroys existing bonds of odour causing gases (bad scents) hence that’s how it neutralizes odours. It does the same to our esophagus & lungs as well as metals & vinyl etc.
1- Hide metals (seat belts buckled in, head rest metal/chrome etc)
2-Turn ON HVAC fan to HIGH on RE-CIRC
set on high HEAT. (Hot air rises)
3- Position OZONE GEN near headliner (use bungie cords through the OZONE Gen handles and rear seat arm supports)
O3 is denser than O2 H2 N2 and other gases in our atmosphere (air in the car) so it ozone sinks to bottom. Plug in a fixed fan along with car vent heat should do the trick.
4- preset 10-30 min depending on odour severity. Close all doors / windows and run. Do in intervals if required more than 30 min. For example: 4-30 min treatments instead of a solid 2 hours.
5- preset Ozone Gen 30 min. Wait another 30 min (oxidation reaction time), roll down windows, doors & set FRESH-AIR mode for 60 min (Treatment + ‘cure’ time) Ozone has a strong lingering smell. Air out for 2 or more hours if you have to. Drive on highway if you have to.
Finally,
If that still didn’t work & you and other still smell smoke odour, then pay $350-850 for professional detailer with warranty and fumigation guarantee.
If that still didn’t work sell the car.
If you can’t sell due to odour, then start smoking in the car and the scent will be unnoticeable by your 3rd pack. 😝
This is the exact vehicle I can here to learn this on. My discovery 2 is in need of this process
What model / manufacturerer is that ozone generator?
But first you have to clean the source which is the mold. Other wise the mold will come back...😳
You would not want to be in there to clean it up before killing as much as you could with the ozone generator first. I drive this Land Rover all the time now it worked great.
@@ThisWeekWithCars it’s really pretty. But if you got it clean without getting sick. That’s awesome....🌟🌟🌟
@@ThisWeekWithCars Thank you for this tried and true test. Did you ever have to hit it with the ozone generator one more time, to kill off any hidden spores - like deep in cracks and crevices and such?
@@Skittlesskittles-om6hpozone the air .. then clean the mold while using a mask.... The ozone one more time after cleaning. Done.
hello how long does the ozone generator have to stay in the car
Depend how bad the car is. In a car filled with mice and mold, once over night wasn’t enough but for a car that people have been driving 30-60 min would do it.
18 hours!! 😦
Ozone can damage rubber seals and plastics (and car interiors). Anyone happen to know if doing this is totally safe?
I talked to two or three people in the business who say it's fine apparently. One was an HVAC guy.
For 1 or 2 hrs fine, but for so long like this clueless guy in the video yes it can definitely degrade bonds in glued surfaces, especially if made with natural rubber. will then lead to creaks and rattles and cosmetic issues
@@hostilityyit's not going to damage that stuff in a single use of a few hours.
Is that a moldy piece of paper at the beginning?
That is a dryer sheet that someone must have used to try and keep the mice out.
2 hours is enough lol
did it worked?did mold came back?
It worked, mold has not come back.
Dudes high in ozone now
You said it got rid of the smell, but did it get rid of the mold?
It should kill have killed the mold but you will still have to take a cleaning cloth and wipe it off all the surfaces.
Good tool! Thanks for the video. Please keep them coming.
Does the airconditioning have be turned on to eliminate smoke smell?
yes sir you need to open the ac while you work with ozon
What happens if you breath it in?
Don’t please! A bit does not harm you but the advice is after threatment don’t go in directly, about one hour
@@Retro.Studio we have this in the workshop and people do it inside, and open all the doors for a while before driving them out lol
That's not the right way to do it. You need to clean the car first and eliminate the source of mold and smell. And when you turn on the ozone generator , you must never breath it while it's on. Close the car and let it run for an hour or so and let it rest fir some time. Finally open all car doors and let a fresh air in.
You apparently have never seen a car anywhere close to this bad.
No... It is the correct way. You ozone first... Then clean.... Then ozone after.
5 seconds in: I'm so sorry.
breathing that nasty mold while he is speaking wow
Lol.he isnt going to keel over and die from opening the door.
30 min to 1 hr is enough for a car...!!
Looks like the vehicle was underwater...
Every Land Rover Discovery 2 has the sunroof downspout broken off, the water will get on the interior roof and start making its way to the headliner material - then the whole car starts to smell like a wet dog .. no offense to dogs. that is when an ozone generator becomes indispensable...
@@jean-pierrescherer8250 Well from what I've seen and been told. Land Rovers are Junk!
i could start arguing here but dont want to - i drive a 2001 land rover discovery 2, 2002 Toyota Tacoma 4x4, a 2020 Kia Soul GTLine - turbo (my wife's) and my daily driver a Volvo S60 - there is no car other than the Land Rover that gives me so much fun driving it AND i can keep my hat on sitting inside!
@@jean-pierrescherer8250 I'm very happy for you. I have a really expensive Mercedes coupe, hardtop convertible...I have people tell me all the time it's a money pit. The thing is...I know how to work on the car. I don't need a mechanic. So if you can twist some wrenches and know things about engines...It's a whole other world. So God bless. I'm glad you like your Rover...
@@AmericanConstellation There You Go!
Must run AC and fan while running Ozone generator.
I suppose if you only have it in there for 30 min, but if you run it all weekend it will get into everywhere. I don't think you understand the smell that was in this truck from years of hundreds of mice.
This dude has no idea what he's doing
you shouldn't be breathing that air...but hey, you do you
A few seconds exposure and he will be fine. You people act like ozone is chlorine gas.
Afterwords just turn off by the plug. Then open all door’s including the ( trunk,boot ) and get the hell out of there. The fumes toxic to humans, and so just let it air out for a couple of hours to just make extra sure. Then remove the ozone generator and disconnect & set the switch to off. Microfibre cloth and a decent cleaner that also kill’s germs is needed. Clean the machine and the handle, but do not forget the power lead & the extension lead that you have used. This is just me but i do this clean over as I do not know when will be the next time I will use it.
OVERKILL
MAKE UP SOME PERMANENT SIGNS UP AND LAMINATE ( DANGEROUS AREA DO NOT ENTER OZONE GENERATOR AT WORK ) ATTACH A SIGN TO THE WORKSHOP / GARAGE DOOR AND TO THE DRIVERS DOOR AND OTHER ENTRANCE’S. This is over kill but at least you have warning signs to stop, say family member’s play in the garage or if you have staff it cover’s you & make’s sure that your workforce is safe. Ozone generator’s can be replaced, BUT decent hard working staff who have built your business with you can not always be replaced so easily.