Isuzu D Max Diesel Particulate Filter Regeneration Frequency Too Often
Vložit
- čas přidán 20. 03. 2024
- Isuzu D Max DPF issues where it would consistently do passive regeneration during everyday use.
blocked DPF Cleaning services from orileysautos@gmail.com www.orileysautos.com - Auta a dopravní prostředky
Anybody else missing jimmy like me? I hope he’s doing ok because he’s the main boss man on my CZcams channel subscriptions out of anybody. I’m looking forward to see him again I can’t wait.
12L of oil. I’m surprised it didn’t runaway on him.
Another good job, Jimmy! Can't understand how someone would put 12 litres of oil in that vehicle without even attempting to confirm that was correct.
Not made anything new Jimmy. I hope you are OK pal. Always looked forward to hearing from you with a new video. Whatever is happening best wishes for the future. Hopefully hear from you soon.
I saw the shop was closed for a bit
His father passed 😢
@@tomwall7966 Sad news....
Sorry mate. Remember the good times.
607:0 like to dislike ratio, absolutely fantastic, keep 'em coming Jimmy!
Thanks this is the one I have a 2017 dmax 3l and have been through all of this dealers refused to accept any thing to do with the dpf and had it fixed by a professional dpf cleaner now I'm 20000klm on and all is good it regens about 500 to 600klm and all is great all my learnings came from Jimmy 2 years of listening to his videos the cleaning company I used here in Australia is doing 3 Isuzu dmaxes 2017s a day with great success dealers here have no idea on them thanks Jimmy im using a CSulut scan tool on my dmax which works ok and the dpf pressure sensor is the exhaust pressure on that scan tool thanks for all the guidance over this time to understand regards Peter in Victoria Melbourne
I noticed that with my car, continuously regenned and the codes said the DPF was very heavily full. Even though I visually inspected it and flushed it with no driveability symptoms there would have been if it had been blocked. I narrowed it down to the differential pressure sensor. It was giving unplausible values, making the ECU think the DPF was more blocked than it really was, hence the attempts to regen. I wonder how many people have replaced a DPF unnecessarily because of a cheap sensor giving wrong values to the ECU.
Heads up jim had d4d toyota yaris high soot matter pressure in dpf fine oil level fine turned out to be the fuel filer !
Takes 5.9 litres of oil. The fact it had 12L in it lol
If the "mechanic" doesn't know how to fill an engine with oil the he's not a mechanic 😂
To add I used jimmy's site for research because you have euro5 -6 standards far beyond what we have here in Australia that has cleared up all my thoughts heaven help all the technicians working on cars in this country when the new standards come they want have a clue
Scania truck have them here already
I think he would love to move to Australia with his family
Just wondering how much oil you removed, and also how on earth these manufacturers are aware of this issue and don't do anything to solve it.
Reading the comments it sounds like it was double overfilled. Wow.
With all that being said it's actually great the car shows you the level of the particles in the filter and the regen process.
well done jimmy keep up the content. why carn't all manufacters put a gauge and tell you when it is regening would save a lot hassle
My 2017 has a gauge to tell you that and I reset trip b at the end of every burn that's why I know 500 to 600klm between burns
Had a p2002 on the newer 1.9.
That was caused by a blocked egr cooler. Took it off cleaned it. Was OK after then
Had same with Bosch and Topdon
These are common for boost leaks and dodgy dpf sensors. Thank you.
The x on the dipstic is normally when its had failed regens and fuel is contaminated the oil....
These are prone for oil going up with regeneration, we have a few at work that constantly go up. It's fuel contamination in the oil.
doesnt matter if the regen is failed or not, its going to raise anyways
Haven’t seen you post a video in a while normally see regular uploads hope all is well
His father passed
Hope your ok Jimmy , I'm guessing/hoping your on holiday ....?
My L200 was regenning constantly. Boost leak on the intercooler to the intake throttle body had a small split. over fueling due to thinking it was getting more air than it was rolling coal and increasing the soot level quickly.
That is it
Bloody lucky they have an oil dilution system safe
Ive learned a lot from this, thanks Jimmy 😊 , no "X" marking on my Vauxhall Astra 2.0 GTC but the oil level never moves in between changes 😊
Lots of diesel drivers are happy sitting at idle for half an hour to a hour waiting in the vehicle. Why do these people buy a diesel for fuel efficiency and then waste it doing nothing. Is beyond me
Hi Jimmy just wondered which model of otofix ate you using
Must have been some mechanic, topping up oil and checking it has to be one of the simplest jobs to carry out.
if im not sure i would rather do nothing to the car until i know how much oil it needs😂😂
Perhaps the owner did the oil change himself but was embarrassed to admit?
in the end did the dpf cleaning fixed the problem? Good Job man greetings from Greece
Hi Jimmy , I own a mercedes c220cdi 2013 with the EGR system is not accessible easily , have you ever had to clean the system without removal , if so what method should I use , I am considering using Yorkshire dpf centre for the work , thAnks for your advice .....
Just curious if you have ever done glow plugs and egr cleaning/blocking on 2010 Hyundai i30 1.6 CRDI 90hp experiencing isuses with long starts and engine feels great once started but not starting like previous times, engine has 360,000km and is sweet as a nut usually
did you hear from the customer ......?
was the problem fixed ?
hi jimmy or anyone who knows. is it ok to use launch UK dpf cleaner and flow restorer on a vehicle that has an eolys additive tank ? thank you in advance
How to read the dipstick on diesel Isuzu D max and Mitsubishi Outlanders: the dipsticks have the (normal) full and low marks for the engine oil level., they also have an 'X' overfill mark. It is expected that these engines will add diesel to the engine oil thereby increasing the oil level above the normal full mark. During running and after any regen the oil level is expected to drop down to the correct level again. If it does not, either due to a fault or incomplete regens the oil level will increase slowly. The engines can be run with the oil level then over the 'full' mark but less that the X mark. If the level reaches the X mark the engine is deemed 'overfull' and the oil must be drained (it will start burning oil, clogging the DPF and in danger of diesel runaway). Also these vehicles calculate and record in the EMU the amount of fuel added to the oil. This has to be initialised to zero amount each oil change or the EMU will thow up an 'overfill oiil' code.
Hie I got a p1447 and p1490 on my 2014 Citroen relay cleaned out the vapouriser but code won't go away if I clear the code when the engine is not running or when running it comes back on after some seconds and says dpf cleaning keep vehicle running any solutions to this problem?
That X on the dipstick tells you it's time to change the oil because of fuel contamination. At least it is on the Mazdas. Pretty sure the car dumps any unburnt fuel into the engine oil if a DPF regen is done. Surprised the other mechanic didn't know that.
2017 doesn't have oil dilution problems because mine never went up in level and I had 84000klm of hassle with dealer
Why is it always the other shop, another mechanic, my neighbor, cousin pookie? As J T would say
You back open mate?
I think your Facebook has been hacked - it's saying closed until further notice?
I have a problem with frequent regens on a Fuso 4p10..
DPF dash meter used to climb to 5 bars before regen. Now regens at 2 bars.
Been having to change oil every 3-4 weeks from dilution.
One code, an intermittent nox level upstream.
Mpg is normal
Dealer is useless!
Please help 🙏
On the launch, you could see the ecm. There was 2, one gray and one green. So next time try and keep an eye out for and other one. Why there sometimes are 2, i dont know 😅
So was it ok on the way home?
Yes
He died
Good
Thanks
According to MPM Oil it needs 5.9 liters of oil! Simply to find on the internet!
Please help 🙏 My Dmax is doing a regen every 60 miles. Cheap code reader has told me the dpf delta pressure is 47psi. Would that mean it's full to the brim with soot? Tia 👍
Yes definitely blocked if 47psi
@@ORileysAutosI'll have to book it in with you soon 👍 thanks for the reply
Hi Jimmy good videos just wanted to ask you where did you get that small piece that you push. Into the pressure sensor pipes where fluid goes in it looks like a metal piece I did look everywhere for that piece I can't find it anywhere
Thank god my mondeo has a vaporiser it doesnt dump fuel in the sump
6 liters extra for any oil dillusion also is kinda weird😅
And if THE MECHANIC is putting NON DPF OIL which has a lot more soot content IT WILL clog ip the DPF now wont it.
The oil is not DPF compatible.
Need to check on these things.
And if its doing DPF regens often the oil level WIL CLIMB UP DRASTICLY cause of extra fuel dumped for regen.
Are you ok mate
Happy Easter. Taking a well deserved Easter break.
Sorry to hear the news sending you all the best mate.
why you dont have single autel product?
Autel haven't been very helpful in the past but I will review a few tools in the future
@@ORileysAutosyes especially the Autel MX808S
Are you ok Jimmy?
Honestly no. But time is the best healer
🙏🏻
The mechanic was a right dipstick! I think them Isuzu need their injectors recalibrating every second service, or something to stop too much oil dillusion
Maybe he's been done in by a rival dpf gang.
Judging by the scan tool, that looks like an import
They have 3 dip stick marks min max and if it fails regens it adds fuel to the oil as a warning on your daily checks which no one does 😂😂
Id say you used the word mechanic loosely when talking about the numpty who put 12L of oil back in without referral to the manual 😂
The exclusive LAUNCH X-431 Eurotab priced at £4440.66 couldn't scan a simple Isuzu D MAX it's ridiculous😮
It can, you just need to feed in the VIN manually and then choose the vehicle year, engine model and fuel pump type
It can, you just need to enter the vehicle manually instead of relying on the autoscan function. Also, this is why REAL technicians have more then 1 scantool.
Errr...the implication that oil dillusion is a phenomenon limited to Japanese Diesel cars is a bit absurd mate.
alot of clowns claiming to be mechanics
so a so called mechanic cannot read a bloody handbook? WTF?
why so expensive for a system designed to fail .........is it all part of this silly game of getting people away from their cars .....
These systems are designed to fail, there's no other reason why these are built this way!
@@tomsurrey2252 defo mate ,so primitive but so expensive
Just unsubscribe 😢
What brought them to say warewolves? Lol must be bored
WEREWOLF'S ARE REAL AND HAVE BEEN SEEN IN THE UK
Had a p2002 on the newer 1.9.
That was caused by a blocked egr cooler. Took it off cleaned it. Was OK after then