Of course it’s upgraded since I just bought the current M12. Got to say I love it and it’s among my favorite tools. I use it every day for electrical work.
Man why cut her off before she mentions the price for the m12 version, I wanted to know how many pennies i needed to stack to go buy that when its released.
Wow morg out in the wild haha. Was saying the same thing!! I got the m12 a while back for tap cons and anchors for flanges and gas lines.. Soooo much better for my uses than hauling a whole m18 around. Have to admit I was a bit disappointed to find out after I opened it and started using it that there was no hammer only function 😅
@@grikemimes yeah I had the original and now have the fuel for the same thing, Mainly just small anchors. Definitely would like to add the small chisel in the mix
Interesting they didn't show their new M18 overhead rotary hammer with built in dust extractor - definitely it is the rotary hammer I'm looking for. as it's quite light at 2.6KG it has built in dust extractor and it has the side handle closer to the back which makes it easier when you are drilling overhead. It should be out in the next few weeks.
Glad I waited and they’re adding the chisel function. The m12 one is going to be perfect for installing windows in concrete block homes 🤙 m18 1 1/8 is a beast but I’ve found can blow out the blocks some and absolutely destroy a 5/32 bit (I went through 20 today..)
I would assume she does weight lifting or she's a cross trainer by the looks of her. Very impressive. Now onto the M12 fuel series of tooks, I seem to grab them now before the M18 fuel tools. They're much lighter, much more compactband very powerful for their size.
I need the m12 now in the uk. Is there a release date? Past three years I've had a ryobi with the same funtions, compact, despite peoples opions, it was a little work horse for me until it packed it the other day. Looks like I'll be buying another as this M12 isnt avsilable. ☹️
Hey Rob, No one else has covered this, so props to You! It was a bit awkward at the end, and we didn’t hear the MSRP on the M12, but I get it; ‘Danielle’ was a spirited and knowledgeable person, but I would have wanted to run from that ‘voice’ of hers! 😯🙄 Milwaukee really CRUSHIN’ it this Year! Wow. Great coverage Rob! Stay safe! 👍✌💪🇺🇸😊
I was at a tool place & saw dewalt’s 12V rotary hammer drill & wondered why would anyone want a hammer drill in a 12V version? It seems to me to be the one tool where you’d always want some umphh. I was in the market for a smallish, lightish hammer drill to make soffits for roof ventilation & opted for the 20V dewalt.
Happy to see an m12 with a chisel function. 👍
You got that right! 👍
It's like milwaukee taps into my dreams.
I sold my m12 sds after 8 great years. The absolute best tool for tapcons while working on a ladder.
@@2chipped I got two of them
Of course it’s upgraded since I just bought the current M12. Got to say I love it and it’s among my favorite tools. I use it every day for electrical work.
The old one looks a lot lighter, so for overhead work it's probably still the go to.
Bought the current one two weeks ago but had a chuck issue, which the drill bit stuck in it sometimes. Now I'll just wait for the new sds drill🎉
@@procrastinator1842 they say its lighter than the old one
@Kostaslilis13 wow...that's amazing...it looks so much heavier!
@@procrastinator1842 yeap i know, if you re watch the video you ll notice it too
Man why cut her off before she mentions the price for the m12 version, I wanted to know how many pennies i needed to stack to go buy that when its released.
Lol same here waiting for the bare tool price, I replayed it 4 times no luck 😢
I think Rob was hungry. He looked spaced out like he was trying to decide what to have for lunch. 😂
@@theycallmefrench Or use the toilet.
Bare Tool will be at 220$ and with a batterie around 240$
@@mky3003 nah, that isn't Milwaukee.
Damn, just got the current M12 to save on weight for up and down the ladder. Now I 'need' that hook?
Epoxy the clip of an m18 drill to the side of, mines lasted 2years just fine
Why is this the only video or information about the new milwaukee m12 sds on the internet?
Hook and Chisel… I’ll upgrade 👍👍
Wow morg out in the wild haha. Was saying the same thing!!
I got the m12 a while back for tap cons and anchors for flanges and gas lines.. Soooo much better for my uses than hauling a whole m18 around. Have to admit I was a bit disappointed to find out after I opened it and started using it that there was no hammer only function 😅
@@grikemimes yeah I had the original and now have the fuel for the same thing, Mainly just small anchors. Definitely would like to add the small chisel in the mix
Interesting they didn't show their new M18 overhead rotary hammer with built in dust extractor - definitely it is the rotary hammer I'm looking for.
as it's quite light at 2.6KG it has built in dust extractor and it has the side handle closer to the back which makes it easier when you are drilling overhead.
It should be out in the next few weeks.
We forgot to show it
She's a unit
Figure she could beat you in an arm wrestling match?
The Guns on her ... 😮
When does it come out?
Glad I waited and they’re adding the chisel function. The m12 one is going to be perfect for installing windows in concrete block homes 🤙 m18 1 1/8 is a beast but I’ve found can blow out the blocks some and absolutely destroy a 5/32 bit (I went through 20 today..)
I would assume she does weight lifting or she's a cross trainer by the looks of her. Very impressive. Now onto the M12 fuel series of tooks, I seem to grab them now before the M18 fuel tools. They're much lighter, much more compactband very powerful for their size.
yes! been waiting for breaker m12 sds. take my money
I ve seen videos of the previous m12 compared to makita and dewalt 12volts and it was very underwhelming, i believe this new tool will be a beast
Did they say exactly when these would be coming out?
I need the m12 now in the uk. Is there a release date?
Past three years I've had a ryobi with the same funtions, compact, despite peoples opions, it was a little work horse for me until it packed it the other day. Looks like I'll be buying another as this M12 isnt avsilable. ☹️
In the UK and want it as well....I'm guessing the end of the year , maybe even January
Bosch, please take notes...
@@T4b10 even though Bosch invented the SDS+ & SDS MAX
@@deluxepressure I know, but they heavily neglect their 12V line up
is it possible to fit the m12 sds wacume to the 12m sds drill?
Why not
Hey Rob, No one else has covered this, so props to You!
It was a bit awkward at the end, and we didn’t hear the MSRP on the M12, but I get it; ‘Danielle’ was a spirited and knowledgeable person, but I would have wanted to run from that ‘voice’ of hers! 😯🙄
Milwaukee really CRUSHIN’ it this Year! Wow. Great coverage Rob! Stay safe! 👍✌💪🇺🇸😊
Is the m18 and m12 more powerful than the older ones
yes!!
@ConcordCarpenter are you going tk review these ? Maybe compare to old ones
I was at a tool place & saw dewalt’s 12V rotary hammer drill & wondered why would anyone want a hammer drill in a 12V version? It seems to me to be the one tool where you’d always want some umphh. I was in the market for a smallish, lightish hammer drill to make soffits for roof ventilation & opted for the 20V dewalt.
I do lots of 5-6mm holes for overhead electrical conduits. The M12 is perfect for this.
Milwaukee M12 sds hammer drill is lightweight & efficient preferred by climbers
That was awkward at best .
Audio was annoying .
You should have stayed on the job bud ;)
Danielle can definitely throw a beat down
I would encourage you to listen more carefully.
Which one can i use for mixing concrete with a stir wand. I had a ryobi hammer drill i used and that thing burned up on the second use.
These tools are not meant for mixing concrete i would go for the 28mm m18 rotary hammer
Milwaukee makes a tool specifically for that, I believe it's called the mud mixer.