Awesome video! thank you! curious if you have a general recommended wire gauge list for different things, injectors, coils, sensor types and so forth. I picked up 22 for most sensors in the video but couldent tell what you used for coils, injectors and others aside from "oversized" injector and coil power to future proof it.
Do you use the holley loom material to wrap your harnesses if so how flexible is that material as i noticed all the different sizes they have and do you get that as tight it will go on or go up like a size so harness will move within loom? I bought the 3 conductor shielded wire to do my i/o does this shielded wire need to be grounded a specific manner? Great videos learning alot thanks for your time to make us all better
Thanks for another one Devin! Those MSD relays, what do you think about substituting them for traditional relays on a typical relay/power board? I can’t swing $2k for a Smartwire setup, so I’m getting ready to build a 7-8 relay board but these things look a lot cleaner. Any issues with running several independent of each other? I’m assuming they can control multiple circuits (4 from what I saw), correct? Thanks again for the vids!!
Devin.... sir you are awesome. You have made my life so much easier on so many levels. Keep on doing what you do. Thank you so much for the video's.
Merry Christmas! Thank you for what you do.I enjoy learning from your videos!
Sad thing is holley shelf harness connection along the trunk are not much better 😂
Thanks Devin, I really appreciate your sharing knowledge on how to do things as right.
Great video thanks bro I want to start building harnesses for my cars I'm a little nervous about what to buy 4 connectors and stuff
Do you use removable bulkheads that split the harness in 2 parts. If so what ones do you use
Awesome video! thank you! curious if you have a general recommended wire gauge list for different things, injectors, coils, sensor types and so forth. I picked up 22 for most sensors in the video but couldent tell what you used for coils, injectors and others aside from "oversized" injector and coil power to future proof it.
Do you use the holley loom material to wrap your harnesses if so how flexible is that material as i noticed all the different sizes they have and do you get that as tight it will go on or go up like a size so harness will move within loom? I bought the 3 conductor shielded wire to do my i/o does this shielded wire need to be grounded a specific manner? Great videos learning alot thanks for your time to make us all better
Thanks for another one Devin! Those MSD relays, what do you think about substituting them for traditional relays on a typical relay/power board? I can’t swing $2k for a Smartwire setup, so I’m getting ready to build a 7-8 relay board but these things look a lot cleaner. Any issues with running several independent of each other? I’m assuming they can control multiple circuits (4 from what I saw), correct? Thanks again for the vids!!
Perfect timing
Do you know if you can make your own USB cable for a sniper? Or do you need to buy theirs
If so which wires do you hook up
Hi so you do recommend the MSD solid state relays to use with smart coils and not the nitrous ones right?
correct or use the dual leash electronics 70 am relays
devin vanderhoof thank you.
Do you buy harnesses?
no i build them
What is your email address?
T76POWER@HOTMAIL.COM
What is your email address?
hcr_innovations@hotmail.com