How To Forge Pattern Welded Damascus Steel For Beginners ~ Step By Step Blacksmithing Lesson
Vložit
- čas přidán 6. 05. 2020
- Step by step guide to forging Damascus (pattern welded) steel in a propane forge by hand for beginners. This video covers:
- Terminology and history
- Steel selection and billet prep
- Gas forge prep
- Use of flux
And more!
My website: www.firecreekforge.com
Facebook: / elijahwilliamsknives
Blacksmith shirts: www.firecreekmercantile.etsy.com
Etsy shops: www.firecreekforgenranch.etsy...
www.firecreekforgeknives.etsy... - Zábava
Excellent instructional video. Appreciate the step-by-step narrative. Thanks.
Best explanation of the process I've seen or read; your hat has delaminations.
Thanks! Haha, yes it does
That is what I call shared knowledge. Thank you and respect.
I don't even make knives but I was so into this video I watched the whole thing! Nice work!
Dude!!! That piece at the tip helped you hold you the blade in place!!!! FREAKIN SMART!!!
This is easily the most detailed explanation of how to forge weld a billet of Damascus I have ever seen. Thank you!
You're welcome! Thanks for watching.
Wow - that's a master class in knife-smithing.
Man, You just helped me understand so much of what went wrong on my first forge welded billets. This is a video is a must watch for anyone wanting to forge weld.
I'm gonna give you a shout out on my channel, this video deserves way more views than it has. Hopefully it gets you some more traffic as well.
Thanks, I appreciate it!
Amazing explanation man I’ve been blacksmithing for months and can do just bout everything I tried from forge welds,firepower’s axes,hachets,a sword & few tools like drawblades etc and lots of wrought iorn work but Damascus is something I’ve never got into cause I couldn’t find any good videos explaining gonna try it now sure it will make a beautiful addition to my shop items once I get it good
Thanks, glad it is helpful
This is such a great video. Your patience explaining even the simplest of details got me hooked till the end.
I have watched many a video on Damascus and this is hands down the most articulate, informative video. Thank You!
You bet, thanks for watching!
I've been trying to forge weld in my gas forge without success. I've watched many videos about the technique but none have gone into this much detail on the flame and how to set my forge. As a beginner, this crucial information. Thank you.
Glad I could help
Amazing video, I'm dieing to see the finished product.
Loads of useful content in this video. I especially appreciated that you included the small error in the billet and how you fixed it. Video takes a long time to shoot and edit, so I thank you for making this content. Great job!!!
Thanks for watching!
This is the best video I’ve seen on how to forge weld. Thank you so much. I’m in the UK and with your knowledge I’m well on my way to improving as a novice forger. 👍🏼🤜🏼
Great to hear it helped, thanks for watching!
I saved this video its great step by step thank u i needed this
Good deal!
What’s up brother just got my first power hammer lol took me 6 years but got one now
That's awesome, I want to get one too some day
@@FireCreekForge yeah I went down to Florida to get mine it’s a home built one but it works good lol
Wow, I was impressed with all of the amazing content you packed into this video! I almost never watch an entire video but you kept me for almost an hour! Well done man!
Thanks for watching!
This is exactly what I was thinking!!!
Fantastic tutori ....Very useful!
Thank for watching!
Thanks for the explanations in the beginning of the video. Very informative.
Thank you for this mate big help mentioning the jet engine
Very nice presentation
This was great man. I've seen many videos on it but you touched areas I haven't heard. I am for sure closing off some of the air next time I'm try it. Thanks 👍
Glad it was helpful!
I don't think I even have one question after watching that! kinda strange huh? Well done Elijah!
it looks like I should send you a new hat from my company! that one has a few miles on it. Stay safe my friend!
Thanks Steve! You'll be happy to know i was forging the Damascus for your knife at the same time, but of course using the press since it started as a 21 layer billet.
@@FireCreekForge That's awesome Elijah, I can't wait to get it in my hands.
Ace...... Thanks for the in depth descriptions and advice..... Makes sense of what I've watched in other videos and gives me the confidence to give it a bash! Thanks
You bet, thanks!
Very helpful video. Thank you for taking the time to shop us beginners how it's done and why you do each strp
Dang I need some of what you got. Big pile of 15n20 over in the corner. I can’t find any blades in my area nor online. Buying & shipping it in 3ft lengths and 1.5” wide threw the mail sucks. Let alone its super thin or limited stock.
Great video for the new guys aswell. Always great to see another go full time for their self successfully.
Thanks for watching!
What a timely video. I just finished this semester and was going to try to make some Damascus when I checked YT and you had just posted the video. Great job and thanks for all the info that I just learned.
You bet, thanks Daniel
I appreciate you sharing your knowledge with us. So many of the blacksmiths don't tell you how, they just show a speed through of the build.
I've jumped straight into the fire attempting to forge weld. I've had two failures so far. So, I had to step back and punt. I started making mono steel knives but they are only so entertaining.
With the newly acquired knowledge that you provided, I may be ready to give it another go.
One of the best and most informative videos I've seen. Wish I had found it earlier. Great job. Keep it up bro.
Thanks!
Thank you so much, this video has given me new hope in one day being able to forge weld, you make it look easy, and your explanation is so easy to follow that I feel much more confident about this type of project
Glad it helped!
Thnx for the tutorial on how to use and do the Wondermus thing you do....
I don't think my neighbors would appreciate the noise... LOL
I live in a condo....
Thnx Again
Excellent and accurate.
Your diagram on the anvil to force out the flux was awesome! Thank you for that! I was just wondering about that!
Also describing the packing process vs the setting hammer blows was very helpful!!!
Thanks for the awesome video. I’m trying to forge my first Damascus billet and after a couple of failures I was thinking of giving up. All this info has given me hope though, back to the forge for me.
Awesome, glad I can help, keep at it!
Another great video with good instruction and close up detail well done I think you’ve upped the game in you tube videos
Thanks!
Phenomenal tutorial. This helped correct several of my issues. Thank you so much!
Awesome thanks!
Absolutely awesome information for forge welding a billet…I watched this video twice. Thank you for taking the time to make it! 🐋
Thanks, glad it was helpful!
I'm learning so much, appreciate you sharing your knowledge, love your stuff, Thank you buddy!! I feel like I'm taking a class!
You bet!
Great video man. You do a great job of putting the process into words
Thanks! Appreciate you watching
Very informative, explained well, great content.👍✌️
Great video! Very educational!
Thanks for watching!
good stuff
Great video!
I have decided to learn to make my own knives. I found this video and went, "Hey, I worked with that guy!" 🤣
Many thanks for a very informative video here sir. You definitely put out a truck load of info here. You sir are a good teacher. Well done!
Thanks for watching, glad it was helpful!
Nice work brother
Great video
New subscriber
Cheers
In the new year I'm going to start blladesmithing with 1 day hoping to create damascus steel . 1 question is what type of welder do I need to weld up the billets? Could I use flux core weld ?
yes that would work
What type of welding rod are you using? Thanks for your video, it made a lot easier to understand.
It is 6013 rod. Thanks for watching!
Great video with lots of instruction and info, well done! On heating an Anvil, WJ Blades just did a cool video of a propane heater for a striking anvil for making Damascus, which is a cool idea.
Cool! Thanks for watching!
I don't flux, it destroys the bricks. I weld all the way around sealing every gap, then bandsaw it off. Then again, I've only done a couple san mai's. (2 months in to the hobby).
Experience is a good but can be an expensive learner
Extremely well done Video! You are very good at explaining the Damascus process. Thank You! Iam a novice Blacksmith, looking to make Damascus. Do you have a Facebook page? Is there a way to ask you questions that I might have?
Thanks! If you want to get in touch, the email contact form on my website is best; firecreekforge.com
@@FireCreekForge great! I appreciate that.
Thanks for making this video man very helpful and informative, I've watched a few videos and this by far was most helpful. I'm about to try my first forge well def be using some of the info you provided. Thanks 👍
Thanks, glad it was helpful!
You can soak the steel in acid over night to remove that scale as well
There are sources that called pattern-welded steel "damascus" since the 1700's. So calling pattern welded steel damascus has been and industry standard for a few hundred years. I personally tend to call pattern welded steel damascus and the historic crucible steel wootz. I do get corrected and lots of hate, but I don't care most people know what I'm talking about when I call them what I call them. I just remind people that call me out that they have probably used the word "cool" incorrectly several times in their lifetime.
Agreed! Good point, and thanks for watching!
Excellent! Do you know of any literature that details how to make specific designs of Damascus? such as: step by step directions for Feather Dsmascus etc...
Look up Jim Hrisoulas. He has three books out and one he is working on.
@@beatlebomber thank you very much.
Very new to this and your video along with others have helped me tremendously! There is one thing that is missing though, the thickness of the two different steels. I did hear you say that the 1094 was 3/16", so by looking at the stacks you had and the 15N20 being half as tall, I am assuming that they are 1/8"? And is this important that they are different thicknesses?
Is it better to forge weld Damascus in a gas forge or coal forge ?
Good question! I have heard both ways. I would love to his response!
Sparks from your forge is not dragons breath. Dragons breath is excess flame emitting from the forge in a near billow, this indicates a rich running forge.
Excellent video. What PSI do you run on forge when welding?
Thanks! Typically I run it 15-20psi for welding
@@FireCreekForge Thank you.
How do you forge weld without using a modern welder to tack it together?
You can use wire to hold it together and I've heard of guys using stainless steel hose clamps
What would a person do if they use a coal forge instead of a gas forge 🤔🤔🤔
The procedures are you he same, managing the coal forge is a little different, such as getting even heat, fire atmosphere, etc..
I have a problem that I don't know how to solve. I use a coal forge and because of this I can’t properly monitor the temperature of the workpiece, because it is in the coals. When I want to do forge welding, my workpiece either melts into liquid metal or I don’t heat it enough and it oxidizes.
You'll have to monitor it better, so keeping it a little more visible and not so deep in the fire may help. Also, frequently rotating the billet for even heating is going to be important in a coal or charcoal forge.
Wow...was excited to see how but 12 mimites of him explaining the sams thing twice is toooooo much.
Any recommendation on the 15N20 thickness compared to the 1095?
I typically use 15N20 that's about .075" to .090" with my non nickel steel being 1/8" inch thick.
@@FireCreekForge thanks! 🙏
How do you achieve a carborized flame in a coke/coal forge?
Air control, plus placement in the fire is important; not too close to the air supply
Where do I get a forge like the one you used in this video?
The term youre looking for?
Wootz.........
how many layers do you use for rain drop pattern
Dude, you are killing me. There is no word "oxidization." It is just "oxidation."
Yes, there is, means the same thing.
Wouldn’t have been easier to grind clean the steel before chopping it up into little pieces?
Your video is excellent but why is it so hard to find a how to thatjustgets to the point
Would not be easier clean the steel before you cut it?
You need to buy new cap 😂
just get to forging dudde jeeze
Bro he disclosed in the beginning of the video this was for people who dont know anything about how to forge weld
Guess what you have thumbs and a skip option on the video skip the educational part and watch the forging jeez
🥱😴😴
Lol watched the whole video
... But didn't see the finished product 🤦🤦😂
Muy denso y aburrido
It's not Damascus steel. It's folded steel. Stop using the term Damascus
Patterned steel has been called "Damascene" or "Damascus" steel for centuries. I'm not here to change that.
You talk to much get to the point
OH MY GOD HE TALKS SO MUCH🤦♂️
It's an instructional video...
@@FireCreekForge You need to mime it of course...
I'm not trying to be rude but you keep repeating yourself
This is true, but I actually appreciate his repetition because it helps hammer the points home (pun absolutely intended!). As a beginner, I often need reminders of key points to keep them in my head.