Making a Metal Roller Bender (Ring Rolling Machine)
Vložit
- čas přidán 15. 01. 2021
- A few weeks ago I had to ring roll some stainless steel while making a weighing frame. However I didn't have a ring roller so just 'got by' with what I had to hand. I have been asked to make some more of the weighing frames so thought I'd have a go at making a metal ring roller. The ring roller is designed primarily for rolling flat stock up to 100mm / 4" wide.
Here are some of the parks I have used. Amazon affiliate links.
3 Tonne Bottle jack - amzn.to/3nPHVUr
Pillow block bearings - amzn.to/3svcHFz
Grey / Blue paint - amzn.to/39BqZfh
If you like the videos I make then please consider sharing them with your friends. There is a share button just below the video viewer. It's got loads of options for easy ways to share a link. This REALLY helps the channel to grow and enables me to bring you more videos.
For more information and behind the scenes content be sure to check out my socials
Facebook: handmadeextreme
Instagram: handmade_extreme
If you would like to make a contribution to the channel then I also have a Patreon page.
www.patreon.com/handmadeextreme
Cheers,
Rob
- Handmade Extreme -
Disclaimer: This video is meant for educational and entertainment purposes only. It is in no way meant to be a set of instructions and therefore no attempt should be made by any party to recreate what has been seen or heard in this video. Any attempt to do so is done completely at your own risk. - Věda a technologie
What a great tool to have in any workshop. I am now making one for my shop. Very useful.
That is the best design I've seen for a DIY roller yet. Nice execution too.
Thank you very much!
Nicely made . Very clear and concise narration makes a great change being told what is going on rather than some heinously bad over dubbed music . Hopefully by now it's been used and proves a great tool . As you say a couple of shims possibly and it's a job well done . Thanks I enjoyed watching .
Genius work! I love it.
Genius move in making the roller supports.
Thanks.
I like the design. Nice and simple.
Thank you MI my respect From GREECE
For the first time IAM able to hear what someone is fabricating great work
Turned out great; including the welds ;) *Well done.* Keep the videos coming!
Thanks glad you enjoyed it. Should be moving to a bigger workshop soon so hope to get some bigger projects on the go soon.
Nice design! thanks for sharing.
👍😎👍 another first class solution to improve the shop. Nice results
Thank you and thanks for the continued support.
Great project Thanks for sharing
Ótimo vídeo bem explicado vou fazer uma e usar seu vídeo como modelo
Fantastic work, really enjoyed, thank you.
Thanks Carl. Glad you enjoyed it. 👍👍
Your short circuit transfer looks and sounds good.
Excellent design thanks
Another great vid! Good detail and excellent commentary. Lessons learned that hard way are remembered longest! (IMHO) 😀
Cheers Al, glad you enjoyed it.
Best design I have found on youtube so far
Great Work! I enjoyed the entire Video. Very well done.
Brilliant work. Great videos.
Glad you like them!
Another Great video. Well done
Thanks again! Glad you are enjoying them.
That came out brilliently, it'll no dought come in very handy in the type of work that you do. look's almost commecial the way it came out.
Thanks very much. It's done a couple of jobs so far and seems to be be working fairly well. Need to make some more dies for it now.
Great shots in this video as usual.
Thanks very much.
QUE TRABAJO TAN HERMOSO. ERES UN BUEN GENIO DE LA CREATIVIDAD.
Brilliant video as always
Thanks again! Glad you enjoyed it.
I have made, once again, a superb work. The quality of the film is impressive. Happy New Year to you and stay safe. Best regards from Geneva.
Thank you. I'm glad you enjoyed it. Happy new year to you also. 👍👍
Thanks for sharing friend gave me an idea for my shop 👍🏽 👍🏽
Great video and commentary, thanks .👍
Glad you enjoyed it
Built like a tank. Nice 👍
Thanks 👍
Very nicely done Mate! I wanna see your video of you making dies for this machine!
Thanks for great video, few good ideas for my own project!!
Glad it was helpful. Good luck with your own project.
What a bender!! Great work as always Rob! Look forward to the next video.
Cheers Josh, glad you enjoyed it.
I'm making a pipe roller and was considering to use hydraulic jack. I gave up the idea because I thought they are leaking and making inconsistent radius. Yours seem to work ok, so now I'm reconsidering.
Nice work Rob!
Cheers Andy. Hope you are well.
Nice build 👍
Nice one! 👍
Good result.
its nice, when you have all the equipment to manufacture anything that you'll need!;
Excelência no projeto excelência na execução enfim parabéns 👏 em toda execução um grande abraço
very nice.build sir
So nice
Awesome!!
If you can see this awesome job bro and really good explanations ..... if you have spare time do a video on homemade scroll benders I've tired it 1 time for other video but it didn't come out as expected
Great video loved the way you kept the little boo boos in. Realistic 👍
Another machine to make when I finally move and get my workshop built. Just got the 250 amp rtec mig and it seems good, hopefully it will be as good as the tig welder I already have
Good luck with the move. We are in the process at the moment. There is a bigger workshop in the pipeline as well so hope to do some of the bigger projects I've always wanted to do.
The MIG seems to be going well. I too also have one of their TIG machines. Bought it over 10 years ago and it's still going strong. That's why I approached them to get the MIG.
I like it!👍🏻👍🏻👍🏻
Thanks! 😃
Got to love a machine that can help make parts for itself 👍
Are these feeling lucky trousers going to be available as merch? 😉
What an absolutely revolutionary idea... Everyone will want a pair for their Saturday night exploits...
Really nice MIG welding there. Thanks again for the detailed walk-through.
Cheers, It's been a few years since I wielded a MIG. Really enjoying the new machine.
epic job☺👍
Thank you.
Hi, when I first saw your bender before actually watching the build, I thought "wow, that's really flexible but maybe a bit of overkill". Now having looked at the performance as built, I think it a brilliant design. To further add to the functionality ( and with the power you have available from the jack! ) I'm tempted to build one with an interchangeable press-brake top that mounts on the same fixings as the top roller
Great Ingenuity and problem solving! How did you find the 180A MIG welder? I have looked at buying one of those from R-Tech to replace my old Mighty MIG.
Thanks, glad you enjoyed it. Seems to be working well so far. I've used it for this project and welding the bottom of my van back together after it failed it's MOT test.
Great work as always. I have just picked up a fly press and making tooling for it. Really useful bit of kit. I may have to add this roller to the list of projects!
Thanks, glad you enjoyed it. Good luck with your tooling! I need to make a load for mine as well.
What is the closest together your outer roller come? In other words how far apart are the outer rollers?
UNA DOBLADORA MUY BUENA.
Nice brother
Did you get round to making the dies, would like to see how they are done
How much upward travel do you have from the top of the bottle jack and the highest point?
PAR-EXCELLENT
Saludos desde la ciudad deLa Paz-Bolivia buen trabajo un favor si podria proporcionar los materiales el espesor longitud que utiliza en sus proyectos.gracias
You mentioned a special die that you wanted fir rolling tubing. What did they look like? Think I know, but would like to know fir sure.
I did not know I followed this channel until the video poped up in my Subscriber section. Seems to be a cool channel :) Greetings from Germany
Welcome to the channel. I'm glad you are enjoying it.
I would have mounted a hinge, with cylindrical lock, at the closure, to avoid every time where to disassemble the main roller, to remove the finished work. It may be a good idea :)
What steel did you use for the main? The piece that got knurled.
Well made...amazing detail.
The pillow block are actually being used backwards to their design. You need caps to reinforce the tops as you have made it.
My notification feed: plants, plants, bats, plants, chickens, plants, food, plants, more plants, metal ring rolling machine.... 😂🤩
Haha, glad you are diversifying. We are in the process of moving to a farm so I expect my feed will also soon be full of chickens and other farm related stuff as I try and learn about it.
@@Handmadeextreme How fantastic!!! Once you bond with land and nature, you'll never look back. All the best wishes in your new life. 🤗✨
That's some heavy gear!!!
Another great video, keep them up! Whilst writing, could you tell me the Scheider protector model number shown in your rotary converter video, I think it is GV2ME06, but not in focus enough to see. Thanks again!
Wish u lived near by
Multi bending its the best , saya dari medan indonesia.
Ok I need the poor man version of this coz I want it 😂😂😂
I noticed some small creasing on your square tube. I believe you will would want a small convex lump on the center of you die. That will push in the inner diameter of the part and fix that issue
Cuanto de ancho lediste al rodillo.
Hi there any chance you have a sketch with dimensions as would like to build one myself. Thank you
Hello Paul,
I just came across this video and was reading comments.
Did you ever get a sketch with dimension for the roller? If so would you share them?
Thanks Ed.
Heath Bourdon
1 second ago
Hi can you supply a parts and cut list for your ring roller as I want to make one for my shed
I assume the 50mm x 50mm x 3mm posts 2" x 2" x .120 wall? I need to roll some 1 x 3 at 14 gauge (~1.5mm wall) for a project would your machine easily do this? If so, could I possibly get you to make the machined parts for me (at some cost obviously) while I fabricate and weld all the other parts? I'd greatly appreciate the help. I have a nice mig/tig machine and have those same bearings on hand. What I don't have however is a lathe and mill. I do actually have an old Logan lathe but I need to restore it and I know nothing about lathing. I can also have some of the parts waterjetted if that would speed up the process (such as the roller cradle).
Hello. How can I get this ruling machine?
Why not arc weld,
What is the size of the pipe
Sir ye tools kaha our kaise mil sakta hai kitana rupay hai
Top , 1A , 👍🇩🇪
How much does it cost?
Way Out West Blow in blog is currently trying to make his own too. Hopefully he sees this.
СУПЕР!!
سبحان الله وبحمده سبحان الله العظيم عدد خلقه ورضا نفسه وزنة عرشه ومداد كلماته
Ye khapar milta ha
🎉🎉🎉🎉Show
Nice project.
I'm a bit confused at the logic behind using multi thousand dollar machienery to build a $300 shop tool. Seems if you can afford lathes and mills you could just buy a roller. No?
request a way to contact.
ок. хорошо. но весь смысл изобретения в том, что такого никто еще не сделал, а не в том, что ты использываешь современные технологии - оставь только металл, подшипник и сварку. и повтори все это. спасибо. удачи
Hanzhen harmonic drive gear , robot arm gear , over 30 years experience ,,
It is usfull
You need gloves