GET YOUR COLLAB TEE AND ENTER FOR YOUR CHANCE TO WIN @MotionAutoTv 'S SICK TURBO B18C CIVIC!!!! motionautotv.c... JOIN THE PATREON!! / rudnik Wanna follow me? @RicerMiata
Real definition of a sleeper especially with the factory exhaust you can't really tell it's boosted I love unsuspecting sleepers good job guys can't wait for tomorrow's upload
I welded galvanized pipe for years at a paintball field I worked at. Like ruddy said, just hold your breath and weld it outside and you will be fine. It will make you nauseous and throw up for a while if you do breathe too much of it. Drinking milk helps
Having flashbacks of when Sammit tried to rage up the hill behind your old shop, we just know you're going to end up nearly rolling the CRV 😂😂 Make sure you wear a helmet up pikes peak dude 🤙🏼
The old saying with 90s JDM Turbo cars, they spend more time off the road then they do on the road. These and the mitsubishi RVR have been turbo swapped here in New Zealand before but its better to use the K24 engine cause of the front facing intake manifold and rear exhaust manifold. Gives a shit load more room for everything and a full sized radiator+ front mount. Trying to do it with the B18, you'd have to try get the turbo as high/top mounted as possible with piping and log/runner manifold.
man i have a 2nd gen crv with a 5 speed and now I am really regretting not looking harder and getting a rust free first gen. this thing is mint compared to my rust bucket. nice work ruddy
So the colab shirt is over, do a new one with the crv AND help Trevor do a Miata build, end the year of car CZcamsrs with a build off between you 2 and build Miata’s….. what you think?
ive always wanted to do a 4x4 crv build. i day dreamed about an h22 with an h2b trans plate mated to the crv trans with gears from a b16 with an ls 5th gear, if you could put the other b series gears into the crv 4x4 trans. OR taking the crv drivetrain and mashing it into an ek hatch with the same setup.
This is so sweet. 5 speed to?? Whaaaat kiiiid lol. Deff go to pfi and have Brent or Jamie tune it. They would love this. Could even do it on the awd dyno
I got an 03 5speed the last generation they made manual crvs. I also have a log manifold I got for 60$. Just need a Japanese spinny boi. I also have a tsx k24a2 all gone threw waiting and ready to swap when I blow the stock motor. Can’t wait to have all 4 wheels spinning in every gear. Plus be able to fit the family on the car with groceries
Nice👌 love some crv content. Highly recommend a kswap awd rd1 crv, i love mine. Doing a boosted b20 crv like yours soon. nice seeing your come together, i think a top mount turbo gets around alot of the clearance issues you've had especially being that the hood clearance is much better than an ek etc. Chur from nz ya filthy c*nts
my buddy bought a first gen CRV same as yours, all the way down to the color. put 33 inch boggers on it and we would jump it piss drunk behind the house in the woods. Not like once or twice, like 6 deep over and over and over; talking like 20-30ft distance. We sold it running and driving 3 years ago and our buddy still daily’s it. these things are actually secret rally cars
It’s wild how ass backwards you guys do things in such a simple setup. you end up spending and stressing more when you try to cheap out. It’s just a big EK civic you’d think Trevor would know better with what they’re doing.
Rudnik you gotta slam the CRV man please dont jack it up dood it would look way cooler if it was slammed ass on the ground ! When are you going to get the HakoSun built Rudnik ?
cant wait till ya go to japan my guy. They are pretty much open to foreigner to come in. You just need to meet minimum prove that you are not have cobid for 3 days so then after ya can go!
@@alastairdow4400 Matt mixed up kalvins there’s one in New Zealand and the other in Texas (the one ruddy was reffering to) he put the wrong insta gram tag
Kitty the owner of AutoLink a jdm Honda specialist accessory and service shop in Temple City California built and use to daily drive Honda CRV like that one for a couple of years.
She had the cleanest crv with all the jdm Honda oem accessories off the Honda catalog and also she lower hers on some jdm branded coil overs and a set of volk te37s. She also had the factory aero.
Trevor: it’s shooting out mouse bits
Chris: that’s good back pressure
I wish I could turbo a car with friends like this, looks like so much fun
Anything is possible my dude!!
Let's all be friends my guy lol ❤ we all here anyways 🎉
same but i lack friends and money haha
I wish I had friends... 😶
That's what I loved about the og haggard garage. It felt like a bunch of guys that would be fun as hell to be around.
Real definition of a sleeper especially with the factory exhaust you can't really tell it's boosted I love unsuspecting sleepers good job guys can't wait for tomorrow's upload
Just saying ricermiata and motionauto is fire! The skills are perfect
We need more collabs with these channels
The ultimate test for that crv is to drive it all the way back to CT.
You need to take it to PFI and let Brent tune it after the build. He'll have that thing singinggggg!!!!
hes in florida
@Kurt Seyffert No he isn't he's in colorado bro. And even if he was he can remote tune it. He did my k20 ek and I live in new york.
Now I wanna watch the 2 of you drift together.
This
I welded galvanized pipe for years at a paintball field I worked at. Like ruddy said, just hold your breath and weld it outside and you will be fine. It will make you nauseous and throw up for a while if you do breathe too much of it. Drinking milk helps
Best channel on CZcams. Never forget it.
MY FAVORITE BUILD YOU GOT RN RUDDY LOVE IT
These vids with Trevor are super fun
Agreed
Trevor and Chris you guys need hangout more
This 🍻
My favorite East coast/No coast collab
Rudnik been watching pole barn garage...(shakes intercooler) "you can tell that I didn't do it, the whole lift is shaking"
You guys are smashing it, great content.👍❤️🇨🇦
Now to see it boosting n ripping round having a blast ... peace n love fam keep it rad stay safe and build on l8z
i got like 100+ entrees in for the civic, if i win i will keep this car for the rest of my life! PLEASE GOD LET ME WIN!!
Good luck 🍻
Having flashbacks of when Sammit tried to rage up the hill behind your old shop, we just know you're going to end up nearly rolling the CRV 😂😂
Make sure you wear a helmet up pikes peak dude 🤙🏼
this video was so much fun thanks guys
If the rearseats recline take the head rest out of the front seats and recline them to make a bed
The duo I Never knew I needed! 🫶🏼
Love this collab
The old saying with 90s JDM Turbo cars, they spend more time off the road then they do on the road. These and the mitsubishi RVR have been turbo swapped here in New Zealand before but its better to use the K24 engine cause of the front facing intake manifold and rear exhaust manifold. Gives a shit load more room for everything and a full sized radiator+ front mount. Trying to do it with the B18, you'd have to try get the turbo as high/top mounted as possible with piping and log/runner manifold.
I feel like Trevor and Ruddy bounce off eachother
Two good dudes
if only it were a factory K series CRV that'd be nuts, turbo.
2nd gen crv life
This is good stuff. I've done so many days like that in the shop.
Maybe check valve lash, may be some of your engine noise, super easy to do
I love the trevor and rudy content🤣🤣.
Same 🍻
My best friend i grew up riding bmx with had a CRV he was wanting to boost it before he passed away cool to see what you do with it
man i have a 2nd gen crv with a 5 speed and now I am really regretting not looking harder and getting a rust free first gen. this thing is mint compared to my rust bucket. nice work ruddy
This weekend I’m turboing my crv too! Aiming for 300!
Only reason I entered to win that civic was cause that junk wagon collab shirt goes hard as hell brother!
Let's go. The experience we all wish we had with some close homies. 💪
So the colab shirt is over, do a new one with the crv AND help Trevor do a Miata build, end the year of car CZcamsrs with a build off between you 2 and build Miata’s….. what you think?
This is some quality content from you and Trevor 🫡
Anyone not watching Trevor’s content is sleeping
ive always wanted to do a 4x4 crv build. i day dreamed about an h22 with an h2b trans plate mated to the crv trans with gears from a b16 with an ls 5th gear, if you could put the other b series gears into the crv 4x4 trans. OR taking the crv drivetrain and mashing it into an ek hatch with the same setup.
24:24 would have been the perfect time for Chris to weld, he does need practice.
Ruddy you gotta bring this thing back to the east coast. Vs are hot rn at least in RI
"Can't wait to jump this thing" 🤣 bro make sure you lower ball joints are good this crvs are known for breaking em
Rudnik check to see if the picnic table is in the back of that crv
Good point
Glad to see the Honda content again. Miss the ricer civic days 😂 and what happened to the Crx ??
Cool video man! You guys are getting professional with your vids
Matt , your spent dude. Calvin in Texas, not avocado Calvin. 😂😂😂
cool ranch Doritos are life
He'll yeah so sick man!! 12 AFR is safe!!
Unsprung clutch is a good way to blow up your transmission 😂🤣😂🤣
This is so sweet. 5 speed to?? Whaaaat kiiiid lol. Deff go to pfi and have Brent or Jamie tune it. They would love this. Could even do it on the awd dyno
Rudy has me wanting to do this and just buy and awd crv tonight
I got an 03 5speed the last generation they made manual crvs. I also have a log manifold I got for 60$. Just need a Japanese spinny boi. I also have a tsx k24a2 all gone threw waiting and ready to swap when I blow the stock motor. Can’t wait to have all 4 wheels spinning in every gear. Plus be able to fit the family on the car with groceries
Do it!
I love my crv it’s h2b swapped awd with ac
can we get a link to the intercooler and piping'
ty
23:47 Trevor just vanished. Matrix confirmed. The 3rd time. 😏🤪
Nice👌 love some crv content. Highly recommend a kswap awd rd1 crv, i love mine. Doing a boosted b20 crv like yours soon. nice seeing your come together, i think a top mount turbo gets around alot of the clearance issues you've had especially being that the hood clearance is much better than an ek etc. Chur from nz ya filthy c*nts
Devcon instead of sand use sugar so you know you get it all out
What kind of wheels you putting on this thing
Great work guys
Good Ole Chris with big brother trev
I've been seeing videos of someone mobbing, what I believe is a crv lifted on tractor tires.
you should do the same!
Fence pipe to AutoZone to “Trevor stole my cat” 😂😂 junk special
b20 is going to blow up
Dang, I can’t believe you guys swapped out the spoon bakes
rudnick renewing him smelling like cool ranch Doritos
28:46 3am thoughts 😂
I know you all put in work but that was a great video!
The intake is the tower of power!!!!!
Go buddies
Those clutch max clutches are decent for the price
Mine sounds just like it but I got a b16 head
7:58 “we got the intercooler piping mopped up”
The radio part killed me xd
Quality entertainment boys 😎🤘
I can't believe Trevor scrambled it😅
I've used the stage 2 clutch max it worked fine
Thumbnails life od vibes
Turbo mouse!! 🔥🔥🔥🔥🐭
hahah this looked like a lot of fun.. more colabs??
This is fuckin awesome. RD1s are life.
All I hear is the injectors lol that's the lifters buddy
my buddy bought a first gen CRV same as yours, all the way down to the color. put 33 inch boggers on it and we would jump it piss drunk behind the house in the woods. Not like once or twice, like 6 deep over and over and over; talking like 20-30ft distance. We sold it running and driving 3 years ago and our buddy still daily’s it. these things are actually secret rally cars
Nice magic trick making Trevor disappear
Anyone ever find that intercooler piping he’s talking about on eBay
Ttevor did a dj with your cat lol
Sounds mint! 😯
Trevy having to pay for that cat now lmao ☠️
Best collab
You live in Colorado now?
Sucks I work in the ocean and missed this whole preorder thing
It’s wild how ass backwards you guys do things in such a simple setup. you end up spending and stressing more when you try to cheap out.
It’s just a big EK civic you’d think Trevor would know better with what they’re doing.
HRG AND LIFT IT!!!🤘🤘🤘🤘
Rudnik you gotta slam the CRV man please dont jack it up dood it would look way cooler if it was slammed ass on the ground ! When are you going to get the HakoSun built Rudnik ?
cant wait till ya go to japan my guy. They are pretty much open to foreigner to come in. You just need to meet minimum prove that you are not have cobid for 3 days so then after ya can go!
Trevor with cutting edge whistln diesel ideas
Are y’all located. In Colorado ?
Put it together and call Nathan karhu 😂
Time for a fat sub in the crv
Let's gooo
Aren't b20's the worst engine from Honda to turbo??
Rust to a minimal wrong kalvin lol he’s talking upstate New York now in Texas kalvin
What?
@@alastairdow4400 Matt mixed up kalvins there’s one in New Zealand and the other in Texas (the one ruddy was reffering to) he put the wrong insta gram tag
All good mat didn’t know of Kalvin
@@RicerMiata yea Matt loves New Zealand kalvin who wouldn’t love a man that’s one with avacados
Kitty the owner of AutoLink a jdm Honda specialist accessory and service shop in Temple City California built and use to daily drive Honda CRV like that one for a couple of years.
She had the cleanest crv with all the jdm Honda oem accessories off the Honda catalog and also she lower hers on some jdm branded coil overs and a set of volk te37s. She also had the factory aero.
Content has been fire lately dood
That engines shot
Just look at street speed he jumped a c8 trx and a bunch of other cars
18:30 looks like my attempt, lol.