Make Your Own SONOFF using node mcu in the easiest way !

Sdílet
Vložit
  • čas přidán 11. 09. 2024
  • In this video, I have shown you how to make your own sonoff by using esp8266 in the easiest way, also I have control 4ch relay module
    you can make no of different things using sonoff tasmota firmware just by changing configurations, define gpio pins for a special task without typing or any knowledge of coding
    I hope you like the video ..... Stay connected for such a video...
    For know more about sonoff tasmota click the link below-
    github.com/are...
    Download tasmota py flasher-
    github.com/are...
    Download Sonoff Tasmota Bin file-
    github.com/are...
    Part List-
    esp8266/node mcu - amzn.to/2O0qcgb
    or esp32- amzn.to/2XOJWrN
    jumper wires - amzn.to/2lwYXMm
    4ch relay module- amzn.to/2Sk9abg
    music provided by-
    • #74 Up Here (Official)

Komentáře • 29

  • @munabhai3505
    @munabhai3505 Před 4 lety +2

    Well done brother good work Can you tell me more about it? Tesmota all configuration please reply

  • @septian5765
    @septian5765 Před 4 lety

    hi.. i wanna ask about the flash button on your node mcu, am i should push the button before or when the flashing operation is on going? or i just left it that way? thanks

    • @CreativeDesk
      @CreativeDesk  Před 3 lety

      no need to push ,,,
      or push before uploading

  • @jemanuelmhz7972
    @jemanuelmhz7972 Před 4 lety

    Otra pregunta, Como puedo conectar un sonoff con Tasmota directamente en Alexa?

  • @rubenmocan2179
    @rubenmocan2179 Před 3 lety +1

    Is compatible with any app ?

    • @CreativeDesk
      @CreativeDesk  Před 3 lety

      You can use mqtt procol app or alexa Philips hue etc

  • @nizamak7a
    @nizamak7a Před 2 lety

    Bro can we use this in ewelink app

  • @simplicioeng
    @simplicioeng Před 4 lety +2

    Can I use on my esp 32 by following the same steps? Thank you.

  • @shrijithmjain2137
    @shrijithmjain2137 Před 4 lety +1

    hi great job , i am in the same path as yours, stuck in finding sonoff IP adress....like how to get it..could you pls help me out with it?

    • @ahmadali-to9fh
      @ahmadali-to9fh Před 4 lety +2

      You can find ip adress using serial monitor in arduino ide at 115200 baut rate

    • @CreativeDesk
      @CreativeDesk  Před 4 lety +1

      Use ip finder app

    • @shrijithmjain2137
      @shrijithmjain2137 Před 4 lety

      @@CreativeDesk thanks for the reply,....I finally found it in mobile hotspot properties.....😅

    • @shrijithmjain2137
      @shrijithmjain2137 Před 4 lety +1

      @@ahmadali-to9fh thanks.....
      I got it

  • @yawarsaeed6499
    @yawarsaeed6499 Před 4 lety

    Can I use it with ewelunk app ?
    If yes then please make another video showing setup.

    • @CreativeDesk
      @CreativeDesk  Před 4 lety

      No.. u cant use it

    • @yawarsaeed6499
      @yawarsaeed6499 Před 3 lety

      @@CreativeDesk How can I use this module as IOT device like the original Sonoff device.

    • @M_Hamza
      @M_Hamza Před 3 lety

      @@yawarsaeed6499 install tasmoAdmin or tasmotizer and you can access the wab terminal through local/network ip address through which it will be connected to your home network

  • @jeevakkuwar
    @jeevakkuwar Před 3 lety

    how to integrate alexa with this configuration?

  • @nOx1D3
    @nOx1D3 Před 4 lety

    Doesn't that.. Defy the point of having a sonoff? Which is a 5 dollar wifi equipped switch? It's about the price not the function

    • @CreativeDesk
      @CreativeDesk  Před 4 lety

      Sonoff is a Very good device to turn off on appliances but using coustom firmware you can do much more ..

    • @CreativeDesk
      @CreativeDesk  Před 3 lety

      Yes
      You can buy original sonoff and flash the tasmota