@@niraj0mohite I want to connect with Google but without raspberry Pi because according to me it's not worth just for voice config it exceeds the budget ,as it replaces our switch board only, so how can we config directly with Alexa/ Google , or with ewelink as it is a sonoff app, or with any other cloud based mqtt ,pls reply if possible
@@swayamvarjagatpalsingh4771 go to your device tasmota web interface > click other parameters > In Emulation section > select Hue Bridge multi device - half task done.. now go to alexa app and ask for "alexa, find devices", alexa will find those devices. Now select each device and configure according to your plan in that app itself.. now this is nothing but you are integrating voice assistant with tasmota, you can create your own voice assistant with many ways.. or you can create own Jarvis kinda server to assist you.. Additional notes:Once you have tasmota terminal you can do tons of fancy things.. just understand tasmota commands I Hope, you got my point.. Search string on Google "alexa hue bridge on multiple devices"
Sir visited your channel too Pls try to make this part of videos too so that other non iot knowledge person like me will also get some knowledge if possible .... Thank you
Hi! Love this. I'm thinking my fledgling home automotive system will be standarized to ESP32-CAMs, MQTT protocol, with Home Assistant. Tasmota firmware makes this so easy. Tasmota deserves a big thanks for their efforts. Brilliant video, love your enthusiasm. Keep up the great work!
Your explanations on Home automation is always very simple and easy to follow. I will definitely encourage you to make more of this videos and I will be part of this journey with you. I am very interested to se how Home Automation and Nodered servers work.
Thanks for this video I was able to build my own smart home. I was able to connect Alexa Amazon to tasomata. it works flawlessly. Thanks again for this knowledge. Its interesting
i have a dought is it possible to controll the appliances through internet like blynk using TASMOTA?.... if possible please tell me i am interested using this....
Bhai please help i bought 2 esp 32 and burned followed all your steps i am getting in termite only the folllowing message in loop ESPrtk test upload firmware OK ESPrtk test upload firmware OK ESPrtk test upload firmware OK no hotspot is generating and i tried to put ssid1 and password through termite and the esp is not reading and no effect i tried to program using arduino ide and its working fine
Sir, You are my inspiration in Home Automation...I had a dream of having a fully DIY automated home which will least depend on the cloud...I learnt the very basics from you what is a esp32,nodemcu, etc. You taught us how to blink led program to 3 way automation using alexa, mannual switches, and blynk/ubidots. Since last 2 3 months i m trying to configure Home Assistant on a Rasperry pi 3b..Faced a lot of problems during the installation, as i was very new to it i joined many fb pages, watched youtube videos, joined many discord servers..And i finally successfully installed the Home Assitant.. Currently i am using basic node red automations on the Home Assitant (HA) using esphome to control my room switches and monitor temp and humidity using dht11..During all these 2 months what i realised that no ones in india is aware of the HA and sadly there's no one making video tutorials on it or the node red also...I am very keenly waiting for your videos on Home Assitant since it is a very powerful platform for home automation.. And sir i will suggest you to start a Discord server for Techiesms so that all of the people who are watching videos and making the projects are facing problems during the process...they can share their problems on that server and you or someone can fix it...I think it's totally free please sir give it a try.. And I am veryyy veryyyy excited for the Home assistant and Nodered series..🥳Veryyyy glad to know that chlo someone from India is starting the series♥️
this is what i was looking for. I would love to see more HA and tasmota Videos. Can you please update the pcb design for ESP32 with 8 Relays and 3 Pin Terminal block for each relay
You are giving a whole new dimension to this home automation concepts...techiesms is something more than an CZcams channel it's a school for us...eagerly looking forward for your new home automation series....keep setting fire guys🔥🔥
I AM VERY VERY VERY VERY INTERESTED IN HOME AUTOMATION!!!! JUST GO AHEAD WITH YOUR IDEAS THAT YOU TOLD AT THE END OF THE VIDEO!!!! HomeAssistant is my fav. platform but I dont know how to use it.....I even want to make my own home automation server, but my code knowledge is very little...But with you too doing the same, I am sure I will be able to make my own very nicely! GO AHEAD!!!!!! :D :D :D :D (can't express my happiness ;P)
You want to know our Ideas/Comments, With due respect, I asked you several times before but not get any feedback regarding an idea. I don't give you any blame because I love your projects so much, & you as well as a teacher because I always learn a lot of things from your videos. I also understood your business, particularly realize how much hard work you and your team have to do to make a project from start to end till the publishing of the video. really it is a very hard job. Anyway, I asked you my previously asked question later, before that I have some suggestions: 1. Please make those projects which are really needed in our daily life, i.e automation projects which are really we need to/Have to use in our daily life, for example, your previous esp based home automation projects, a Fan speed controller, etc. These real needs make people very much interested in this IoT world. 2. try to make the projects as much as cost-effective, say if you make a project whose objective result should not available into another less priced product available in the market. 3. You may make a community in which people can join with you from all over the world to develop/enrich your/our/ people's idea implementation, Their IOT based Needs, code, hardware and product development without any personal interest, just for love the Passion behind IOT/Electronics. Bro, Why we don't dream one-day techiesms becomes an international famous organization in the IoT world.
Today I don't repeat my previously asked question rather Have a request regarding that question please make an updated video by adding two physical buttons with zero cross dimmer which was only controllable by the Blynk app slider (with internet). That important project has no manual control, i.e it does not work without internet. I also see your ''All in One Home Automation project with Fan Dimmer | Internet & Manual''. If possible Please update the project (using both the Zero crossing method and the Blynk platform ) i.e "AC Dimmer using Blynk | ESP8266 Projects | IoT Projects" by adding two push-buttons by which increase and decrease the Light intensity/Fan speed. It will be better if you add more two buttons just for On/Off another AC load. Thanks.
My fav. CZcams channel for Home Automation! A request, can you plz do a video on how to make a face recognition door lock with a decent web interface? (ESP32 can, ESPEYE, RPi, any board you like...)
Sir I follow all your videos and also subscribed and this is the most easiest and coolest project till now, I also tried this , it is one of the best and I request you to make a video based on how to use tasmota ,how to config other things like timer set , Mqtt etc. And can we add slider for fan ? ,also can we use with ttp23 switch for up & down to control fan speed with that " capacitor non humming kit " which was used in your one of the video l liked that most. I'll be greatful to you if you try to reply............
Surely.... we need series of some interesting home automation projects...pls do work on home automation......also I sincerely thanks to your whole techie SMS family for your hard task.,👍
thank you sir, for sharing such a great knowledge with us. Just wanted to request you, can you add this TASMOTA to be working with voice commands? If yes please let us know. Thank You. Big Fan.
@@iot_enthusiast i don't have any motion sensors, i have automated my lights and lamps to turn on at specific time and automatically turn off in the mrng and also google assistant integration
Banana PI BPI-bit is an ESP32 with 32-bit Xtensa LX6 dual-core processor based embedded system. It supports Webduino, Arduino, MicroPython as well as Scratch X programming environments. wiki.banana-pi.org/BPI-Bit
Was just waiting for such a video. Thank you
Yes creating own server is interesting.
Btw thank you for sharing unique knowledge which makes us curious for ur upcoming projects.
Thanks a lot . It works ;-)
Very interested and excited keep going ❤️
Specially making the whole server
yes I'm, always luv to learn....... you doing great job... keep doing !!👍
yes yes please carry on i have been waiting fo this kind of video
Amazing work. you revealed your plan which makes us to really follow your video.
Super work bhai❤️
Pls explain the timer and mqtt part of this firmware also ,can we add Alexa or Google assit. to it?
Yep, it's possible to connect with your voice assistant and many more..
@@niraj0mohite I want to connect with Google but without raspberry Pi because according to me it's not worth just for voice config it exceeds the budget ,as it replaces our switch board only, so how can we config directly with Alexa/ Google , or with ewelink as it is a sonoff app, or with any other cloud based mqtt ,pls reply if possible
@@swayamvarjagatpalsingh4771 go to your device tasmota web interface > click other parameters > In Emulation section > select Hue Bridge multi device - half task done.. now go to alexa app and ask for "alexa, find devices", alexa will find those devices. Now select each device and configure according to your plan in that app itself.. now this is nothing but you are integrating voice assistant with tasmota, you can create your own voice assistant with many ways.. or you can create own Jarvis kinda server to assist you..
Additional notes:Once you have tasmota terminal you can do tons of fancy things.. just understand tasmota commands
I Hope, you got my point..
Search string on Google "alexa hue bridge on multiple devices"
Great sir and thanks 👍 for the details it helped me 😊 exactly what I needed for my homeautomation...
Sir visited your channel too
Pls try to make this part of videos too so that other non iot knowledge person like me will also get some knowledge if possible ....
Thank you
Looking forward to these videos. Own home automation server sounds interesting.
Yes sir, I'm very much interested and excited too :')
Yes it perfect go ahead on this! Lets jump into next level.
Hi! Love this. I'm thinking my fledgling home automotive system will be standarized to ESP32-CAMs, MQTT protocol, with Home Assistant. Tasmota firmware makes this so easy. Tasmota deserves a big thanks for their efforts.
Brilliant video, love your enthusiasm. Keep up the great work!
Awesome 👍 very exciting for home automation series.. 🔥🔥
He is one of my patreon supporters and they get access to my videos earlier than everyone else
is it necessary every time to enter local ip address in browser to get Tasmota dash board?
I love to see home assistant videos too
Yes plz do as soon as posible I really want to set up own home assistant server and do full home automation
YES GO FURTHER WE EXPECT MORE FROM YOU ON HOME AUTOMATION VIDEOS
Yes we are interested series of all home automation
Gracias por los contenidos y los subtítulos. Excelente
Nice video
Can we control the devices any where from world or only using local IP ?
Your explanations on Home automation is always very simple and easy to follow. I will definitely encourage you to make more of this videos and I will be part of this journey with you. I am very interested to se how Home Automation and Nodered servers work.
Yes sir keep it up
Thanks for this video I was able to build my own smart home. I was able to connect Alexa Amazon to tasomata. it works flawlessly. Thanks again for this knowledge. Its interesting
Sir you are best
yes i would love it , to learn those things from you.
I'm very excited to home automation series
Yes bro we are interested 🔥
Hey !
I was having some trouble with one of your previous project based on ESP32.
Please help.
and yes we are really interested...in your upcoming uploads.
Sure
Then just subscribe the channel so you don’t miss out any future video on these topics
@@techiesms Already did sir... Was a subscriber from the beginning...
i have a dought is it possible to controll the appliances through internet like blynk using TASMOTA?....
if possible please tell me i am interested using this....
Not just using Tasmota
U need to use other platforms to make it control over internet
Using just Tasmota you’ll be able to control it locally
Bhai please help
i bought 2 esp 32 and burned followed all your steps
i am getting in termite only the folllowing message in loop
ESPrtk test upload firmware OK
ESPrtk test upload firmware OK
ESPrtk test upload firmware OK
no hotspot is generating
and i tried to put ssid1 and password through termite
and the esp is not reading and no effect
i tried to program using arduino ide and its working fine
Sir, You are my inspiration in Home Automation...I had a dream of having a fully DIY automated home which will least depend on the cloud...I learnt the very basics from you what is a esp32,nodemcu, etc. You taught us how to blink led program to 3 way automation using alexa, mannual switches, and blynk/ubidots. Since last 2 3 months i m trying to configure Home Assistant on a Rasperry pi 3b..Faced a lot of problems during the installation, as i was very new to it i joined many fb pages, watched youtube videos, joined many discord servers..And i finally successfully installed the Home Assitant.. Currently i am using basic node red automations on the Home Assitant (HA) using esphome to control my room switches and monitor temp and humidity using dht11..During all these 2 months what i realised that no ones in india is aware of the HA and sadly there's no one making video tutorials on it or the node red also...I am very keenly waiting for your videos on Home Assitant since it is a very powerful platform for home automation..
And sir i will suggest you to start a Discord server for Techiesms so that all of the people who are watching videos and making the projects are facing problems during the process...they can share their problems on that server and you or someone can fix it...I think it's totally free please sir give it a try..
And I am veryyy veryyyy excited for the Home assistant and Nodered series..🥳Veryyyy glad to know that chlo someone from India is starting the series♥️
Yes...! I am interested..... :)
Really interested for your Home automation projects 👍.
Love from Kerala 😘
Nice video,
Yes, we are interested.
Very interested for the series
can you provide circuit diagram for esp32 and 4 Channel Relay board. Since you have added each component separately. I am not able to figure out
hello, the tasmota device does not automatically reconnect to the network when the power goes out. How can I solve this problem?
I wait of your new video i hope that is very interesting
NodeRed that's great I will love to follow the series
Then just subscribe the channel so you don’t miss out any future video on that
Yes, come up with your new series along with IoT Edge Computing for Smart Home Automation.
this is what i was looking for. I would love to see more HA and tasmota Videos. Can you please update the pcb design for ESP32 with 8 Relays and 3 Pin Terminal block for each relay
Yes very much interested
Then just subscribe the channel so you don’t miss out any future video on these topics
Can we set up it with Alexa or Google nest mini??
less coding wow! thanks for this nice video tut.. looking forward for more videos sir.
Yes bro we intrested
You are giving a whole new dimension to this home automation concepts...techiesms is something more than an CZcams channel it's a school for us...eagerly looking forward for your new home automation series....keep setting fire guys🔥🔥
True :D
A series on home automation will be really helpful.....Ifttt moving on to being a paid software looking forward to learn home assistance....
Yes we are waiting for your next video.
Can you make a tutorial for nextion tft display with your previous project ESP 32 Home automation.
I AM VERY VERY VERY VERY INTERESTED IN HOME AUTOMATION!!!! JUST GO AHEAD WITH YOUR IDEAS THAT YOU TOLD AT THE END OF THE VIDEO!!!! HomeAssistant is my fav. platform but I dont know how to use it.....I even want to make my own home automation server, but my code knowledge is very little...But with you too doing the same, I am sure I will be able to make my own very nicely!
GO AHEAD!!!!!! :D :D :D :D
(can't express my happiness ;P)
Sure Sure
just subscribe the channel so you don’t miss out any future video on these topics
@@techiesms I am already Subscribed !
@@techiesms :-D
Can we use tasmotizer to flash esp32
I am layman but I stick with your video very interesting
Ur guess are awesome plz go for another level as u say
👌👌👌bro I'm waiting for your next project creating a server for home automation
Great job Sachin! Next is Home assistant and ESPHome 👍🙂
yes please
Would love to know more about Home Assistant and Personal Home Automation Server.
Sure
Then just subscribe the channel so you don’t miss out any future video on these topics
You want to know our Ideas/Comments, With due respect, I asked you several times before but not get any feedback regarding an idea. I don't give you any blame because I love your projects so much, & you as well as a teacher because I always learn a lot of things from your videos. I also understood your business, particularly realize how much hard work you and your team have to do to make a project from start to end till the publishing of the video. really it is a very hard job. Anyway, I asked you my previously asked question later, before that I have some suggestions: 1. Please make those projects which are really needed in our daily life, i.e automation projects which are really we need to/Have to use in our daily life, for example, your previous esp based home automation projects, a Fan speed controller, etc. These real needs make people very much interested in this IoT world. 2. try to make the projects as much as cost-effective, say if you make a project whose objective result should not available into another less priced product available in the market. 3. You may make a community in which people can join with you from all over the world to develop/enrich your/our/ people's idea implementation, Their IOT based Needs, code, hardware and product development without any personal interest, just for love the Passion behind IOT/Electronics. Bro, Why we don't dream one-day techiesms becomes an international famous organization in the IoT world.
Today I don't repeat my previously asked question rather Have a request regarding that question please make an updated video by adding two physical buttons with zero cross dimmer which was only controllable by the Blynk app slider (with internet). That important project has no manual control, i.e it does not work without internet. I also see your ''All in One Home Automation project with Fan Dimmer | Internet & Manual''. If possible Please update the project (using both the Zero crossing method and the Blynk platform ) i.e "AC Dimmer using Blynk | ESP8266 Projects | IoT Projects" by adding two push-buttons by which increase and decrease the Light intensity/Fan speed. It will be better if you add more two buttons just for On/Off another AC load. Thanks.
My fav. CZcams channel for Home Automation!
A request, can you plz do a video on how to make a face recognition door lock with a decent web interface? (ESP32 can, ESPEYE, RPi, any board you like...)
Yes, we need to develop with Node-Red wiring tool, it's very interesting....👍👍
you can subscribe to my channel too, if you're really interested in node red 🤗
Yes I am intrested
Sir I follow all your videos and also subscribed and this is the most easiest and coolest project till now,
I also tried this , it is one of the best and I request you to make a video based on how to use tasmota ,how to config other things like timer set , Mqtt etc.
And can we add slider for fan ? ,also can we use with ttp23 switch for up & down to control fan speed with that " capacitor non humming kit " which was used in your one of the video l liked that most. I'll be greatful to you if you try to reply............
Bro we can connect more relay with tasmota like 20 ,18
Yes sir we need a series on home automation and and m eagerly waiting for ur next video❤️🤩😍
We are waiting for this series sir..
Surely.... we need series of some interesting home automation projects...pls do work on home automation......also I sincerely thanks to your whole techie SMS family for your hard task.,👍
Sure
Then just subscribe the channel so you don’t miss out any future video on these topics
Yes bro we all required the Series of Home Automation Project.
Would love to see more videos about automation with ESP32 and Home Assistant (HASSIO)
After flashing the firmware, can I upload regular codes to the ESP from Arduino IDE?
Yes
But the Tasmota firmware will be erased automatically
@@techiesms Thanks. :D
Yes, I'm interested .
Sure
Then just subscribe the channel so you don’t miss out any future video on these topics
Yes
Interested 😍
Alex home automation for 12 channel relay with feedback.
Code please help
Need a video on creating personal automation server...which can control all appliances from anywhere in the world using a self created android app
You should do videos on integrating home automation products into home assistance local control
Your videos are great and inspiring. Keep up the good work... But just try to keep the prompter below or inline with the camera... 👍
awesome video, how about compiling custom tasmota to add https for a more secure setup.
Yes sure I always wait for your videos and as soon as it come I watch it. Thanks for the knowledge
Yes Node Red Thank you
How to add a reset button to esp8266-01 board to reset tasmota to factory defaults?
(in case when I change my wifi ssid/password )
You doesn't need reset button, switch on/off six times automatically reset that.
Yes I would like to learn node red please do a series
Sure
Then just subscribe the channel so you don’t miss out any future video on these topics
It's already done since last 2 years buddy❤️
Yes bro
yes....
we are interested
The IP address is only accessible within WiFi networks, what is If want to use without connecting to Wi-Fi
Hello I am very greatfull and need more video on home automation without coding
of course we are interested.......for home assistant automation with raspberry pi
We need home automation with basic tutorials bro
Waiting for RPI home automation
વાહ સરસ
Mqtt સર્વર બનવાનો એક વીડિઓ ફૂલ ડિટેલ થઈ બનાવ ભાઈ
Chokkas
How long took the flashing process in your cases?
OK. I solved my problem, it's caused by the wrong COM port selection :(.
yes
thank you sir, for sharing such a great knowledge with us. Just wanted to request you, can you add this TASMOTA to be working with voice commands? If yes please let us know. Thank You. Big Fan.
Yes you can integrate Alexa with this
@@techiesms Please make a video if possible sir... Looking forward... and by myself too...
You are a great inspiration
❤️
Product is good but wifi also need to add wirelessly then it will be superb 👌🏻
Nice video! Could you please, make a Tasmota on ESP32 + MCP23017 using more than 16 relays or more? :)
Yes I want to learn about IoT with advance features
yes yes am in
Home automation series please
Yes sir please fast
please do a video on how to use SPIFF using Tasmota running on esp32 - thanks!
I have already made the server using home assistant, my home is automated compltely.its very interesting project.but still im waiting for the series 😁
please share how you are using home-assistant and the automations you have created - motion sensor , presence detection etc
Yes brother i need some assistance in setting up the Remote Access of HA...Please help..
@@iot_enthusiast i don't have any motion sensors, i have automated my lights and lamps to turn on at specific time and automatically turn off in the mrng and also google assistant integration
@@rajmohanjena109 u need to open port 8123 in order to Operate it from WAN. For that u need to purchase static ip from your isp
@@avinashvk578 nice!
Are you using the Tasmota scheduler or home assistant automation to turn lights on and off at a particular time?
Banana PI BPI-bit is an ESP32 with 32-bit Xtensa LX6 dual-core processor based embedded system. It supports Webduino, Arduino, MicroPython as well as Scratch X programming environments.
wiki.banana-pi.org/BPI-Bit