DeWALT XR Concrete Nailer HAS A SPECIAL FEATURE! (don't overlook this!)
Vložit
- čas přidán 17. 03. 2020
- DeWALT XR Concrete Nailer HAS A SPECIAL FEATURE! (don't overlook this!) In this video we show the #verycoolgang a overlooked special feature on the new DeWALT 20V MAX XR Cordless Concrete Nailer! We unbox and overview this cordless concrete nailer because we are building some new walls at the shop and needed a new concrete nailer to put some metal track in place on top of concrete. Our old cordless nailer is a Paslode concrete nailer that runs on gas and battery power but keeps on failing or running out of gas. This new concrete nailer from DeWALT is super nice and has a special feature that you don't want to overlook! Let us know your thoughts on this cordless concrete nailer from dewalt in the comments section below.
- Jak na to + styl
Finally a great video of an awesome tool and yes it has been around for about 3 years i own one i'm happy with it ... videos like this makes me forget about this awful virus going on
If the plastic sleeve breakdown overtime you’ll end up with a loose nail. That is not perfectly embedded.
I have had one when they first came out I still use gas more because the power , but it still works good for new concrete, just need better pins
The company I work for has one and I love it! I do commercial HVAC install and DeWalt also offers accessory hardware to use with the pins such as washers and hanger brackets so I can shoot a nail through their washer to hold hanger strap to concrete for hanging duct or I can shoot a nail through one of their hanger brackets and then loop cable through the hole in the bracket to hang duct. It's so much quicker than drilling a hole and then pounding in one of those anchors that looks like a bent nail. I believe they also sell an extension pole so you can use it without climbing a ladder. I would imagine ceiling grid guys could use one for hanging their grid wires as well.
Perfect embedment ? It was sticking half of an inch out 😂
I was wondering the same thing...You gotta hit each one after to get it flush?
Really liking these tool review videos on a job. Thanks for good content
The light never flashes red because of Gas, Always battery!!
Rookies aye
I know, feigned ignorance is annoying.
I appreciate the video! I do contracting in Arvada so I’m glad someone local is using it haha
My Man VCG ----- I love the way you present your videos . You take charge of the show !!!!! I see myself talking like that to my guys on site and some passing by onlookers....... " Come over here , let me show you how this works " My favorite line lol
Must have! Love my Dewalt Framing nailer and Dewalt Brad nailer.
Nice design with the back extension which keeps it level.
Hey Vince, loved the video! I love seeing you on site testing the tools. Keep up the great work!
Rock on DeWalt .....I have all Dewalt its an awesome platform ...Carpenter from Australia
the one i keep going to for these applications is the hilti bx2 and 3, they are alot quieter and they don't seem to get the same blowout that we usually get with the gas versions.
Thank you for the video Vince, that's an awesome gun, hope it gives you many years of service
Love your videos bro keep it up !!!!
Keep up the great work! 👍🧰👍
Just got crete nailer. Awesome tools. Forget shot n pins!!! Doing 2000 lin ft of 16 ga framing. Its a dream!
Nothing beats the BX3
😎Great video! 🔥I loved it! The Chimney Boys approve👍🏻
Great demo it’s very quiet! Think it’s great 👍
❤️
Looks like the very short nails are having difficulty going into the tough "old cured" concrete. Not sure how it will work with structural steel either if its having difficulty with the concrete. I'm on full Dewalt ecosystem, but I think more R&D is required on this product, will have to wait it out for the second revised version. Not quite there yet.
Just like their framing gun that uses the paper collated (paslode) nails.
Like all dewalt nail guns they're underpowered.
This nailer is weak I think paslode or Ramsey is better for the price
There are special hardened nails that you have to use when punching into steel or toughened concrete. They are marked with a black colour. These yellow ones are standard nails
We use the hilti fast track and we get 1200 shots per gas tank andbit doesn’t use battery. I love it but this looks pretty dope too
Pretty impressive to be honest. Cordless power tools have come so far, I remember when I got into the trades all we had to use was the old Makita long handle 12 volt drills that would get so hot one couldn’t use it and u better have had 15-20 batteries on hand 😂.
Yo fellas! That seems like an fun big boy toy. That thing is sweet! Great vid gentlemen! Stay safe and have a wonderful rest of the week. See you at ttr!!!
big toy famous amos
I'm so bummed today😣. I forgot to close my truck bed gate last night, and went to work this morning without realizing it was still open. Sadly 2 tough system boxes with ALL my DeWalt power tools and batteries fell out along the way. I'm mad at myself for letting that happen but so sad because you work hard and invest into your toys (tools). I know with time, I'll be able to eventually buy these things again.... Its just depressing😔. Just wanted to vent with fellow tool junkies! Hope y'all have a good rest of your day.
We that sucks, sorry cuz!
I feel your pain man! I lost a couple stuff due to open tailgate also. Pickups should have a warning light for open tailgate IMO. Also a good idea to secure the boxes with a bungee cord at least for the bad cases like that...
Same shit happened to me 16 yrs ago with a brand new paslode cordless framer and new circular saw.shit sucks
Awesome tool!
Dude your awesome!!
dudes the phill swift of Dewalt over here. awesome man
Until now - i did not know DeWalt had a non-gas nailer and if it works better than the gas or powder types then the better.Best review yet.
That's is sweet I like the no gas part it's like the new nail guns no air hose and compressor to deal with and the noise is even better used to have the gun news the different color shots put each Dale in individually one of the time and then press down where you want to shoot and what did everybody do look away and pull the trigger this way so much safer you look at what you're shooting and very quiet
Hey vince just want to thank you for your opinion on drill driver bit sets. I picked up the Milwaukee shockwave impact duty set for 29 buck from home depot when it was on sale on line. 15 piece drill set and 45 piece driver set. Thanks again keep up all the hard work you do for us.
Glad I could help
Off subject, but I received my first VCG T-shirt yesterday...embroidered logo...very classy. Way to bring it VCG!
Nice Bob, thanks!! 👍🏻
I love these unboxing video
@VCG Construction what's your favorite/default company for cordless power tools?
I dig it. I was using a blue powder-actuated tool from Lowes that was $200. As a cntractor, I can see the savings on that tool, especially to the ears!!. cool video guys
Dude you are a character bro, I like you man - keep up the vids
That looks like a beast cuz, gotta do some specs on it when ya can.
Great video Vince
You guys do awesome videos.I stumbled across one of your vids. Now I’m hook VCG Gang!
Thanks Bricks!
@@VCGConstruction its a shame they aren't real tradies and have no clue what tradies care about in a tool
Use the 1/2 inch for steel there black strips not yellow they work better, I've shot down 1000s of ft of c channel for shaft wall at condo separation WALLS. That gun is AWSOME and is another reason I'm a Dewalt guy they are truly the company of inovation.
👍🏻
Nice tool. Tnks
I would love to have the DeWalt tool to add to my DeWalts, but I'm past that point in my life. 36 years ago I first used the old orange handle Remington nailer with a big ball-peen hammer to set the charge off. We rented a 7,500 sq. ft. first-floor space, cleared the old walls, and built 11+ foot high walls with steel studs. I'd never used steel studding before nor had I used the Remington nailer. They both worked like a charm! I switched to DeWalt tools with almost all tools, starting when DeWalt brought out their 4 1/2-inch handheld grinders. I think they were a new brand then. I still have the grinders, still working! Yes, I added more DeWalt grinders to those for faster usage of whatever is needed but the original grinders are tops for endurance. Purchased in the early 1990s. Amazing, there's been almost no maintenance done, always used in a commercial art foundry. Boss!
Great demo, as usual, Vince!! Would like to see a follow up video of how the Dewalt pinner works on steel to steel. Can't wait!!
Will do
Love your channel. Respect the beard
Hey just a story I was told here in Denver by a Dewalt rep, he had a guy buying up a ton of the 2 1/4 nails, so he asked him what he was doing. The guy said he was nailing together SUPER hard woods and nothing he could find could do it except this gun. Interesting solution!
Beast mode 💪
You can definitely he has to tell people how to do things the right way on the job alot 🤣🤣
i got this 2 days ago. I have used it to roughly run 300 pieces of hat channel and around 5000 ft of track. Decent tool beats the ram set and paslode any day of the week
can u fit another brands of pins??
Love the knife.
It looks like a pretty good tool but how versatile is it trying to fit it into small places in holding it above your head for so long
Very nice nailer
It’s a great tool I have 3 of these and they work great
Bad ass!!
DeWALT loves to make our lives easier..💪🏼
I am a dewalt man but Hilti smokes it in this department.
When is the Milwaukee M18 21degree Framing Nailer coming out!!?
The best concrete nailers are Hilti and Spit, these run with gas and battery.
I don't use them enough to buy But so sweet and quiet!
INCREDIBLE DEVICE! NO MORE GUNPOWDER!
Nice gun Vince, I still use an old Hilti 27 caliber 10 shot concrete gun. The worst part about that gun is the pressure it puts on your wrist every time you shoot it. The new Dewalt gun looked like it didn't hurt every time you shot it. Thanks for the Video brother.
yes and yes sir
@ VCG construction There are 4 new XR Dewalt tools coming out with power detect technology. A circ saw, a new Sawzall, 5 inch angle grinder, and hammer drill!
waitning for review of milwaukee riviet gun,looks compact and cool
Good music to keep ppl alert
Awesome!!
Test the HILTI. Just ordered one and I'm very excited about it.
Yellow and Black looks good in those machined hands
You know it Lou!
will this attach say 3/4 thick wood to cinder blocks ? thanks.
Would it work on Carpet tack strips in old concrete?
Like that the magazine comes off
Impressive! Someone knows if there's a model specific for finish trim work! Wood wood... smaller than this and nailing sizes of 2... 1.5 and 1 inch!?
Can you use any ccn pins or they have to be dewalt branded?
Does it come with a magnetic tip like track fast
@vcgconstruction what knife is it that you have in the video again?
What do you use when fastening down 2x4’s
I been using a Ram-Set for years. It is cheap and easy to use... But this seems so much faster, so I guess it is time to upgrade.
Nothing beats the powder actuated nailer
Tool looks great! But can you post a link for you knife?
Hilti has one too. Called the BX3. Insanely powerful nail gun. But you gonna pay a good amount of money for it.
i didn't know dewalt made one of those...for now ill stick with hilti gas+battery (the battery last weeks and you can always check before using it in the morning at what level you are if gas or battery are low u can bring a spare with you or switch the battery), i like how the pins don't stick out its much faster to stand the studs after when no pins hook on the studs!
what kind of brand of sealant you use ?
First time I seen that one I've always use my Hilti bx-3 it's loud I can't even hear myself think after using it
Hilti is making one (bx3) from years :D Im waiting for one from Milwaukee :D
*4:47*
*ahhaahha You are the man loved the review I felt like you where sincere good stuff man :) good looks bro !*
Does it shoot ceiling grid clips
I wouldve liked to see you try n use longer nails to try and get a 2x4 in the concrete and i think i read that nailer shoots 2 1/4 max? Idk if 3/4 into the concrete is enough with that especially if they stick out the top a little bit. I usually use at least 2 1/2 tapcons wich takes forever. Cool gun though very interesting
2 1/2 maybe 3 inch would be a perfect gun for the 2x4
Can tool be used as a framing nailer also
I would like to see how it works with steel. I have one and it has problems with brick wall. Too weak for me.
You NEED to try ours ;)
Off topic but is there a reason you don't tie your corners together on the tracks?
Dewalt so beauty!!!
would you have concrete nailer between hilti bx3 and dewalt dcn890
I WAS GOING TO BUY ONE OF THESE.
BUT THEN I SAW THIS VIDEO.
I like it but...... getting back to Dewalt platform again, not sure I want to go that route happy with Milwaukee 👍👍👍👍
Thanks for not screaming, "what's up" in this video.
Any nail guns for duplex nails?
Hey buddy what Workshoes are thoes that you have on?
How did your project come out ?
Has Milwaukee come up with a concrete pinner yet?
Nice knife
Did u see they have a roofing nailer also
🗣🗣🗣🗣🗣🗣🗣Great Video Tool bro 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼nice dewalt ✌🏼✌🏼✌🏼✌🏼✌🏼✌🏼