How to Install 9” QLED Android Plug and Play Unit (2006-2012 Toyota RAV4)

Sdílet
Vložit

Komentáře • 37

  • @Miss.kittty
    @Miss.kittty Před 5 dny

    Great video. No endless yapping. Thank you

  • @xXGreyageXx
    @xXGreyageXx Před 4 měsíci +1

    Did this on my corolla now I’m prepping for my rav ❤😅

  • @T-Rex0711
    @T-Rex0711 Před 4 měsíci +3

    “Look at the new radio I installed you honey!”
    “What the heck happened to my trim?”
    😂😂

  • @RuiGong-wc7iv
    @RuiGong-wc7iv Před 3 měsíci +6

    Can you tell me where you bought it? I can not find😅

  • @STRIKER520
    @STRIKER520 Před rokem +22

    Don't mess with wires behind the dash while the battery is still connected.

    • @ProdThrash
      @ProdThrash Před 10 měsíci +4

      I mean yes as a precaution, but also there is no or not enough power to the wires with the key in the off position so it shouldn't matter.

    • @anthonyt4981
      @anthonyt4981 Před 8 měsíci +2

      there is nothing back there that has a constant 12v. they are all fused so doesn't matter.

  • @alexlaukh
    @alexlaukh Před 9 měsíci +3

    Will it have the same wire from the original rearview camera behind the original radio unit? My 2010 limited is still rear mirror to display the rearview image, I am not sure about that before start installation.

  • @JeremyByemanzi
    @JeremyByemanzi Před 7 měsíci

    My Vanguard has an additional screen in the back seat for passengers entertainment. How to I switch to this radio and still connect that screen?

  • @BrendaTheGr8
    @BrendaTheGr8 Před 6 měsíci +4

    Why didn’t you replace the bolts you removed when you took the radio out?

  • @toyotajhie
    @toyotajhie Před 7 měsíci +6

    How did you bind the steering control? Thanks

  • @soliditalstud
    @soliditalstud Před 6 měsíci

    Did u use a canbus system? Looking to do this for my wife 2011Rav4. I know for my Corolla because I already had backup camera I used it but she has nothing but steering wheel controls

  • @priyadeeppatil
    @priyadeeppatil Před rokem

    Same can be done for basic model of rav 4 2009 or how ?

  • @cesarguerrero5630
    @cesarguerrero5630 Před 6 měsíci +1

    Is this compatible with a back up camera?

  • @jesusdelgado9142
    @jesusdelgado9142 Před 9 měsíci +9

    What model radio is this so I can look it up on the website they have??? Or can you guys insert a link in here to follow for this model??!!

  • @PLACESNONDESCRIPT
    @PLACESNONDESCRIPT Před 5 měsíci +1

    What about push to start model

  • @nightmarehd8171
    @nightmarehd8171 Před 3 dny

    The radio system is in the description guys

  • @AMF96
    @AMF96 Před 11 měsíci +1

    I have a 2011 RAV4 Limited that came with and still has the Factory JBL premium audio system but was wondering is it possible for me to switch out the system with the Toyota OEM NAV system that were an option on these cars straight from Toyota? Is it just plug and play and would the wiring for the NAV system already be there?

    • @JB-423
      @JB-423 Před 10 měsíci +1

      may get a better answer by calling toyota dealership and ask parts department

    • @ProdThrash
      @ProdThrash Před 10 měsíci +1

      you want to switch out JBL to stock???

    • @AMF96
      @AMF96 Před 10 měsíci

      @@ProdThrash well, I’m talking about switching out the JBL unit for the NAV unit. The NAV unit has the navigation screen and was a factory option straight from Toyota. To my knowledge Toyota had 3 different factory available units. 1 the standard sound system with a basic single disc CD player. 2 the upgraded Premium JBL sound system with upgraded speakers and 6 disc CD player. And 3 the Denso NAV system with a standard audio system but has the navigation system and screen.

    • @nickmac8225
      @nickmac8225 Před 4 měsíci +1

      If you have camera,nav or JBL amp use this adapter for retaining all those things PAC-RP4-2-TY11-Wiring-Interface

  • @Mudzungairi
    @Mudzungairi Před 6 měsíci

    Where did you buy it?

  • @tazukia743
    @tazukia743 Před rokem +4

    What brand/model is the headunit you istalled?

  • @BigSkyC0untry
    @BigSkyC0untry Před 10 měsíci

    Does this work if I have the OEM factory camera?

    • @nickmac8225
      @nickmac8225 Před 4 měsíci +1

      If you have camera,nav or JBL amp use this adapter for retaining all those things PAC-RP4-2-TY11-Wiring-Interface

  • @RajendraSingh-qg3cx
    @RajendraSingh-qg3cx Před rokem +2

    Nice video bud I have the Limited 2009 with the JBL sound system and the three wires that comes out from the factory radio. One of them is blue 20 pin I cannot see or find the correct wires. I bought several wires off Amazon and I have them works and two different type of aftermarket radio from 100 to 300 any advice, would greatly appreciate it

  • @daddy-bm7eu
    @daddy-bm7eu Před 9 měsíci +1

    FIRST DISCONECT THE BATTERY
    THEN REMOVE GENTLY PARTS
    SECOND REMOVE SCREWS
    THIRD CHECK RADIOS ARE COMPATIBLE

  • @HDZewz
    @HDZewz Před 8 měsíci +1

    Link???

  • @YTgrinderr
    @YTgrinderr Před 10 měsíci +4

    What do you break it? You just broke it like it was nothing important😂

    • @damorafik
      @damorafik Před 8 měsíci

      It was already broken, because he grab it from the middle

  • @Al-bd8hm
    @Al-bd8hm Před měsícem

    No link== dislike.