Nice job on the jeep! I just read that T A has left the Hot Rod Garage show. I will miss the chemistry you guys had on the show and the stuff you guys took on. Hoping for the best for you both in your future endeavors!
I've been turning wrenches for a considerable amount of time and I remember my first cooked wiring harness. It was a 1988 Chrysler minivan it was a bit intimidating but I went for it and now when I look back on it I realize it taught me a very valuable lesson , self confidence.
Lucky you are the best at figuring stuff out , I remember you doing stuff for us at Performance Paint and always figuring it out in a few minutes after we spent hours getting no where.
Love the channel, man. I know less than zero about wiring. I love seeing some of the electrical you do, to just learn some basics (I don't have the knowledge or balls to try anything advance and burn my rig down). Keep em coming.
Always great looking forward to new host. Loved Tony and will mis him. You have been great in all your guest appearances so I know you will be awesome.
That level of wiring is akin to voodoo to me. Always cool to see someone who 1)isn't afraid of the task and 2)knows what the hell they're doing do the repairs to get it right. Thanks, Lucky! - Ed on the Ridge
Best of luck to T A. I'll keep watching you here and elsewhere. Will miss the team work between you two. Hope you're interviewing some new good talent. Big shoes to fill. Been in corp field all my life before I retired. Hope they keep your TV show. I'll be watching. Thanks Lucky. !!!
Sucks that Tony is leaving HRG, but the builds now have a better chance of survival...lol That looks like a Braun light from Harbor Freight. I have the same one, works well. Nice job on the Jeep.
Wow, that's a lot of CSI shit to find out what's screwed and what's not after a fire like that! Kudos, Lucky! I just heard that Tony's heading back east. Bummer, dude, but I'm looking forward to whoever gets chosen to work with you on Hot Rod Garage (I vote for Faye)! Have a good one, man!✌️❤️🙂🇨🇦
Can you do a video on the 93 jeep grand Cherokee Laredo I'm having lots of electrical issues but I want to know how difficult and costly a full wiring replacement and possible upgrade would be any ideas?
I have a 2010 jk that I had the heater core replaced last winter. After that, I have no power to my climate control panel (ac, vents, rear defrost). I know nothing about wiring, just wondering if you could give a direction to start?
I have a 2012 Wrangler JKU might have some bad wiring, a camshaft position sensor bank 1 code keeps popping up along with my Jeep stalling. I live in Phoenix so the extreme heat might be killing the wiring harness, any suggestions? I just replaced the camshaft position sensor with another Mopar OEM part but code is still coming up, going to replace the crankshaft position sensor then reset everything with the JScan app.
Wander how many certified mechanics labor hours it costs for this repair? Bucu Bucks I bet; I have a 93-jeep Grand Cherokee 4.0L and need a totally new harness. But don't have that kind of cash; Thanks for the video; going to try it myself.
Hello lucky .. who would you like or think could be a good replacement for the big shoes tony Angelo left empty ?? Or you take over and have a co host ??? Is that something you would like ??? I think you be a great host and have fun doing it too !!! My thought s on it anyway !!
Can you please put a link for the ecm guy, I've sent my ecm out twice now they just can't fix iac valve, I'd like to see if you're friend could get it fixed. It's just a pain.
Help me please. I replaced the interior harness. Yet o go to start it and im getting power everywhere, but it wont start. There is no starter relat near the battery. It started and ran before i started. So its not the starter. Please any help you can give would be appreciated.
I know all that wiring looks intimidating when its laying on a bench but you should see what a wire harness for an Apache helicopter looks like when its laying on a bench. Gives you a new respect for the wire board layout guys when everything is cut to length and fits correctly.
The plastic wrapping you use on the front panels, although they look easy to use, don't they cause more plastic waste? When you use the normal fenders covers, they are reusable.
Hey Lucky..can you suggest a good way to wire up a 2003 wrangler sahara rear wiper/defroster and spray nozzle for a jeep that never had it..any help would be so appreciated..Im 51 and lost..please help..thank you
First off, I'm not sure if this the same Tony from Hot Rod and Roadkill. Way too professional. Also I totally agree that body men should never be allowed to touch wiring.
Same year and options They make hundreds of different harnesses that almost look exactly the same and then once it’s all installed, there’s a couple of plugs that are there or aren’t there and features that will work or won’t work. Every harness has a actual number on it and you can match that number.
I hate you soo much. Makes it look easy. I cringe as the harness end connectors beat there way past everything to reside where they do once it's unwound and stuffed in it's spot. I always slam one of those connectors to infinity,,only to have to chase it down again due to non function. Thanks Mr C!!. Cheers and beers,, and Christ on a Crossbow,,,, Lookout!!,,he's good!!.
Nice job on the jeep! I just read that T A has left the Hot Rod Garage show. I will miss the chemistry you guys had on the show and the stuff you guys took on. Hoping for the best for you both in your future endeavors!
T A left the hot rod show 😟 I liked that guy he fun to watch
Well that bites!
@@dhackens He will be back
I've been turning wrenches for a considerable amount of time and I remember my first cooked wiring harness. It was a 1988 Chrysler minivan it was a bit intimidating but I went for it and now when I look back on it I realize it taught me a very valuable lesson , self confidence.
Lucky is one intelligent man his attention to detail is amazing. Fantastic work like always.
The vehicle wiring is turning into an artform like paint, exhaust etc. I feel I've improved my wiring skills by watching you.👍
Thx for the follow thru. Glad to see her up and running again
Lucky you are the best at figuring stuff out , I remember you doing stuff for us at Performance Paint and always figuring it out in a few minutes after we spent hours getting no where.
Wow Performance Paint.
DM me on IG
Great job! You definitely have an eye for detail. Fixing it right the first time.
Nice work! Much Thanks for the tutorial in seeing a harness going back in one uninterrupted video.
Thorough repair. Making it look like it never happened is even better.
Thank you for sharing. FAN-tastic repair. Watched and very much enjoyed.👍👀
Always great work. Good little groove in the music too.
thanks!
Lucky is the definition of a professional
I love that “ I will do a little paint correction” Wash it with Ajax…😂
Lucky thank you man. Your Always killing it brother. Great trouble shooting this out , you explained it wonderfully Lucky God bless you brother
Keep the stories coming. That's why I'm here!
Thanks!
Love the channel, man. I know less than zero about wiring. I love seeing some of the electrical you do, to just learn some basics (I don't have the knowledge or balls to try anything advance and burn my rig down).
Keep em coming.
Like the above and beyond you always do. Always over deliver.
Just one word amazing great job!
You made that stuff look easy👍
Good video as usual ! The 100k wall hangers make decent battery trays.
Thanks lucky, great video as usual 🙂
Like 'em...new intro and music.
Thank you!
Always great looking forward to new host. Loved Tony and will mis him. You have been great in all your guest appearances so I know you will be awesome.
👍👍👍🏁🏁🏁🏁
Impressive Lucky!
Nice video, I've got a 1980 CJ7 that I want to replace the old harness. I bought a new one, but I have been dreading this job,
Great stuff Lucky! I never realized about the Mobile part of your business name. Very impressive! Thanks
Your shop truck doesn't buy its own tires, so a little job to fill a bay in the shop can't hurt. Thanks for the videos👍
A lot of people get queezy thinking about wiring, you seem to make it look easy. Enjoyed the video and smashed that like!!
Thanks Danny 👊
All things Lucky! The man the myth the Legend in his natural habitat!
That level of wiring is akin to voodoo to me. Always cool to see someone who 1)isn't afraid
of the task and 2)knows what the hell they're doing do the repairs to get it right.
Thanks, Lucky!
- Ed on the Ridge
excellent work!
Thanks a lot!
You are the wire-master Lucky!
Another job well done!😀😎
Now I know why you always get stuck with the wiring lol, love the content.
Thanks for the video Lucky!
Thanks for watchin!
Great video
Best of luck to T A. I'll keep watching you here and elsewhere. Will miss the team work between you two. Hope you're interviewing some new good talent. Big shoes to fill. Been in corp field all my life before I retired. Hope they keep your TV show. I'll be watching. Thanks Lucky. !!!
🏁🏁🏁👍👍👍👍🤓
Another successful super repair !!!
Love to see videos like this. A true master at work :D
thanks!
Great video bud! Very well done
Thanks!
Good job on the jeep 😊
- Love the '70s movie type music. Reminds me of '70s police/detective movies. Bullitt comes to mind. 😁
It looks good
Like the new intro great work as always..lucky.✌🙂🙏
Thanks for the feedback!
Nice fix sir!
No doubts that you couldn’t handle it. Thanks for the conclusion.
Thanks Lucky!!
Thats one thing nice about jeeps you can swing that door wide open or even remove the door.
I know wiring jobs are the worst. Great job as usual. Love the videos.
Thank you Lucky...
Thanks!!
Always nice when you rewire and all the smoke stays in the wire when you hook back up to the angry pixies 😂🍻
Sucks that Tony is leaving HRG, but the builds now have a better chance of survival...lol That looks like a Braun light from Harbor Freight. I have the same one, works well. Nice job on the Jeep.
Wow, that's a lot of CSI shit to find out what's screwed and what's not after a fire like that! Kudos, Lucky!
I just heard that Tony's heading back east. Bummer, dude, but I'm looking forward to whoever gets chosen to work with you on Hot Rod Garage (I vote for Faye)! Have a good one, man!✌️❤️🙂🇨🇦
Lucky, What a great job,scares me to think about doing a job like that.
How long did it take less painting the hood?
Nice work. How much tie did you have in that?
Dig the new graphics and intro Lucky!
Thanks!!
Amazed how fast it went in... Spaghetti monster tamed.
Best days to you all 👍
As you got deeper in the old harness , anything change in your diagnosis of the cause ?
Can you do a video on the 93 jeep grand Cherokee Laredo I'm having lots of electrical issues but I want to know how difficult and costly a full wiring replacement and possible upgrade would be any ideas?
Lucky; as in your lucky it was him that worked on your vehicle.
Who makes that neat trouble light?
I have a 2010 jk that I had the heater core replaced last winter. After that, I have no power to my climate control panel (ac, vents, rear defrost). I know nothing about wiring, just wondering if you could give a direction to start?
Hey Lucky where do you get the stick on fender covers?
I have a 2012 Wrangler JKU might have some bad wiring, a camshaft position sensor bank 1 code keeps popping up along with my Jeep stalling. I live in Phoenix so the extreme heat might be killing the wiring harness, any suggestions? I just replaced the camshaft position sensor with another Mopar OEM part but code is still coming up, going to replace the crankshaft position sensor then reset everything with the JScan app.
Wander how many certified mechanics labor hours it costs for this repair? Bucu Bucks I bet; I have a 93-jeep Grand Cherokee 4.0L and need a totally new harness. But don't have that kind of cash; Thanks for the video; going to try it myself.
She lives☝️👍👋
What scanner are you using Lucky?
What company do you trust for the best replacement wiring harness?
Hello lucky .. who would you like or think could be a good replacement for the big shoes tony Angelo left empty ?? Or you take over and have a co host ??? Is that something you would like ??? I think you be a great host and have fun doing it too !!! My thought s on it anyway !!
Where can I get the wiring loom harness for a jeep wrangler 2007?
I’m new to your channel I have a question what do I need to fire up a 4.0 I’m putting a 4.0 in a little Suzuki samurai
Can you please put a link for the ecm guy, I've sent my ecm out twice now they just can't fix iac valve, I'd like to see if you're friend could get it fixed. It's just a pain.
Help me please. I replaced the interior harness. Yet o go to start it and im getting power everywhere, but it wont start. There is no starter relat near the battery.
It started and ran before i started. So its not the starter.
Please any help you can give would be appreciated.
What year is this Jeep with a straight 6 in it???
Wow ,wiring Guru, great job,great video also,tks for all those ck tips Lucky.hood too know
I know all that wiring looks intimidating when its laying on a bench but you should see what a wire harness for an Apache helicopter looks like when its laying on a bench. Gives you a new respect for the wire board layout guys when everything is cut to length and fits correctly.
I’ve been there.
Wire by number.
The plastic wrapping you use on the front panels, although they look easy to use, don't they cause more plastic waste? When you use the normal fenders covers, they are reusable.
It sure is a lot harder to put the magic smoke back in than to let it out.
How many hours in the job in total?
Hey Lucky..can you suggest a good way to wire up a 2003 wrangler sahara rear wiper/defroster and spray nozzle for a jeep that never had it..any help would be so appreciated..Im 51 and lost..please help..thank you
Cleanest way would be to just order the factory harness from a online junk yard or go and remove it from a wreck.
Get the factory switch to.
2001 Wrangler harness TO 1997 Wrangler... I NEED HELP. It has to be possible. I want all the newer stuff in my 97 jeep
where is this guy located?
First off, I'm not sure if this the same Tony from Hot Rod and Roadkill. Way too professional.
Also I totally agree that body men should never be allowed to touch wiring.
Does it have to be the same year harness? Or is there certain years that would work I have a 2008 wrangler x
Same year and options
They make hundreds of different harnesses that almost look exactly the same and then once it’s all installed, there’s a couple of plugs that are there or aren’t there and features that will work or won’t work. Every harness has a actual number on it and you can match that number.
@@luckysgarageshow thank you very much!!
do you realize you're actually livin' the dream of most car guys ?
I like TURTLES !
looks great. if you ever find yourself in Detroit i got a job for you
Looks like Finnegan work
Man your coming up on 100k subs. What kind of giveaway are we doing ?
Yeah, just noticed that!
MR. Lucky,, May I contact you for some advice? Possibly paid help?😁
👍👍 always Lucky question Edelbrook EFI have you ever interested one
That Jeep is BLT = burnt like toast
Great video. can i contact with your about cooperateion
you might get more done it you had Tony around.. Ops........ my bad,, TONY BREAKS EVERYTHING
What's happening with HRG
Say it ain't so.
Why don't you modify your mobile-tech lucky logo to be Lucky's Garage Show and use that on your videos for title sequences? Class it up Lucky! :D
Algorithm satisfying comment
I see the problem. It doesn’t have 40s and a lift kit 🤦♂️
I hate you soo much. Makes it look easy. I cringe as the harness end connectors beat there way past everything to reside where they do once it's unwound and stuffed in it's spot. I always slam one of those connectors to infinity,,only to have to chase it down again due to non function. Thanks Mr C!!. Cheers and beers,, and Christ on a Crossbow,,,, Lookout!!,,he's good!!.