Re-Wiring Your Old Jeep EP1

Sdílet
Vložit
  • čas přidán 8. 09. 2024
  • Need to rewire your Jeep but on a tight budget? Here I use the EZ-Wire brand 12 circuit universal kit which sells for under $200 dollars.
    Support the channel and get a 15% discount from Auxito LED bulbs with the code below.
    www.auxito.com...
    Instagram; http: oldcarg
    Facebook; / old-car-garage-1053964...

Komentáře • 21

  • @GorillaCookies
    @GorillaCookies Před 3 lety +2

    Walmart actually carries the exact same tail lights for $6.97 / pair . They are identical to my factory tail lights on my 1974 CJ 5

  • @oldguy5458
    @oldguy5458 Před 4 lety

    Came over from Real World Garage ,,Thanks for the tip on bolt cleaning,,Best Regards

  • @Dadlifeprojects
    @Dadlifeprojects Před 4 lety

    Great video. I got the 16 circuit harness for my 64 Impala. Great price for the harness.

    • @OldCarGarageUSA
      @OldCarGarageUSA  Před 4 lety

      Agree, these are good harnesses for the money. Thanks for watching!

  • @chris707man
    @chris707man Před 4 lety +1

    Great!! Thanks

  • @ozarkdaredevils
    @ozarkdaredevils Před 2 lety +1

    Will this kit work for my 1975 Jeep CJ5 ? Great video thank you

    • @OldCarGarageUSA
      @OldCarGarageUSA  Před 2 lety +1

      It's universal, so it will work. It will not be the same harness as factory, so there will be connections you will have to make or reuse out of your current harness.

    • @ozarkdaredevils
      @ozarkdaredevils Před 2 lety +1

      @@OldCarGarageUSA Thank you , took your advice went ahead and purchased the kit .

    • @josephkuriger869
      @josephkuriger869 Před 2 lety

      @ozarkdaredevils I'd love to know how it goes. I'm about to start a 75 cj5 as well

  • @Timk1945
    @Timk1945 Před rokem +1

    I know this is from 2 years ago but maybe you will see this message. I’m mending a 1955 cj5 as well and converted it to 12 volts. I have the same old king seeley cluster with the silver facing. My question is about the fuel and temp gauges. Did you use a voltage reducer to allow those to work on your 12 volt system?

    • @OldCarGarageUSA
      @OldCarGarageUSA  Před rokem +1

      I'd recommend using the voltage reducer. I didn't and used a cheap 12 volt gas sender. Seems the gauge was working, but now it's intermittent, although could be the sender that's bad. Thanks for watching!

  • @randy-mw5dq
    @randy-mw5dq Před 2 lety

    You leftout the most important part, wiring from switch to wipers is there a fuse evolved.

    • @OldCarGarageUSA
      @OldCarGarageUSA  Před 2 lety

      On my 55 Jeep, I have vacuum wipers, thus no need for a circuit. If you use the EZ wire harness, there is a fuse and labelled wire that you would run to the wiper switch, then from there run a wire to the wiper motor. Hope this helps, thanks for watching!

  • @DRgoa
    @DRgoa Před rokem +1

    Will this work for a 74 dj5c?

    • @OldCarGarageUSA
      @OldCarGarageUSA  Před rokem

      Yep, universal kit so can adapt to any vehicle.

    • @DRgoa
      @DRgoa Před rokem

      @@OldCarGarageUSA thanks for the quick response, do you have the part number for it?

    • @OldCarGarageUSA
      @OldCarGarageUSA  Před rokem +1

      @@DRgoa www.ezwiring.com/product-page/ez-wiring-12-standard-wiring-harness

    • @DRgoa
      @DRgoa Před rokem

      Thanks!