Hello! I have 2x Deye 5k inverters (and I want them to work in parallel), a single-phase grid and one single-phase generator with start-input (NO relay) for solar inverters. And I have a couple of questions: 1. How should I connect generator to inverters? Should I connect it to only one of them or to both (GEN-port)? How should I connect G-V out of each inverter (should I connect them in parallel) to start the generator? 2. What is powered from generator when grid is de-energized? Only battery charger or backup load directly also? (I mean: how critical is frequency stability of generator and what about it's power?) 3. Am I right that I should configure "rated power" of generator as 1/2 of actual generator's rated power on each of 2 inverters? Thank you!
Do you have a 12kw split phase 120/220 volt USA version that they are selling on alibaba? I want to get that size for Jamaica. I want to make sure it’s 120/220 volt split phase and not 220/230 volt. Thank you. Also do you have an official site I can buy from?
Need help on connecting 2x 8kw Deye Inverter in parallel, after programming the inverter do I merge the Load output cables ? Example: Master Live cable to Slave Live cable...am overthinking
Yes, the diagram are the same for home load/grid output wires (same connector) and backup load wires, you need merge in their specific busbar. One for homeload/grid Line, other for neutral and other for Ground and the same configuration for backup load.
Happy new year 2024 and thank You for diagram
Hello! I have 2x Deye 5k inverters (and I want them to work in parallel), a single-phase grid and one single-phase generator with start-input (NO relay) for solar inverters. And I have a couple of questions:
1. How should I connect generator to inverters? Should I connect it to only one of them or to both (GEN-port)? How should I connect G-V out of each inverter (should I connect them in parallel) to start the generator?
2. What is powered from generator when grid is de-energized? Only battery charger or backup load directly also? (I mean: how critical is frequency stability of generator and what about it's power?)
3. Am I right that I should configure "rated power" of generator as 1/2 of actual generator's rated power on each of 2 inverters?
Thank you!
Würde mich freuen wenn es solche Anleitungen auch in Deutsch geben könnte 👍 🇦🇹🇦🇹🇦🇹
Why is all the three , three-phase hybrid inverters, connected in parallel marked as master in the video? Shouldn't it be master --> slave--> slave?
Do you have a 12kw split phase 120/220 volt USA version that they are selling on alibaba? I want to get that size for Jamaica. I want to make sure it’s 120/220 volt split phase and not 220/230 volt. Thank you. Also do you have an official site I can buy from?
Can I parallel 16KW and 10KW hybrid inverter?
hello , can i connect only two single phase inverter in parallel for a three phase load? and if yes how to do that.
no u can't becouse the load need three phase not two phase for example (motor electrical )
@@houcineamaidi499
thank you so much for your help
Hi.No you can't, you must use three phase inverters
Need help on connecting 2x 8kw Deye Inverter in parallel, after programming the inverter do I merge the Load output cables ? Example: Master Live cable to Slave Live cable...am overthinking
Yes, the diagram are the same for home load/grid output wires (same connector) and backup load wires, you need merge in their specific busbar. One for homeload/grid Line, other for neutral and other for Ground and the same configuration for backup load.
Hi,the load cables also need to be connected in parallel
Can we do parallel 8kw deye hybrid with 5kw deye hybrid
Hello, How to connect the CAN wire to 5 inverters in parallel?
This can't be done, the battery only communicates with the master
Hello, could in the three phases parallel diagram CT to be replaced with smart meter?
Yes, you can use Chint or Eastron 3 phase smart meter
Thank you @@makunan
Hi you can