1998-13 H-D Electra Glide Ultra Classic Stage-3 Installation
Vložit
- čas přidán 26. 08. 2024
- This video will explain the procedure needed to install a new source unit, amplifier, fairing speakers, TourPak speakers, and add saddlebag speakers on a 1998-2013 Harley-Davidson® Electra Glide® Ultra Classic. We'll be using the high performance Rockford Fosgate HD9813SGU-STAGE3 audio kit. Make sure this kit fits your Harley-Davidson model by checking our Compatibility Chart on the details page below.
HD9813SGU-STAGE3 DETAILS
www.rockfordfo...
TUNING GUIDE
rftech.custhelp...
PAUX: Punch Universal Auxiliary Input Port (optional)
www.rockfordfo...
MOTORCYCLE PLAYLIST
Watch our motorcycle playlist here: • Motorcycle: New Products
#RockfordFosgate #MotorcycleAudio
Just installed this while following this video. Worked perfectly. Thanks for the great video.
Great Job Sean! Glad you were able to successfully get the kit installed! Was the Amp Tuning Guide easy to follow?
Tuning guide worked perfectly.
Awesome @@sean5794! Great to hear your feedback!
Hello. I’m interested in this kit. I have a 2006 ultra classic. I think the fairing speakers are 5 1/4. Will the speakers in this kit fit?
Yes, the TMS6SG speakers include an integral adaptor and speaker grille. Literally pull out the factory ones and drop in the new ones. You can see more detail on the speakers here: rockfordfosgate.com/products/details/tms6sg/
Hey! I have a 05 Ultra Classic that I keep in mint condition. I purchased the HD9813 at Harley in Sturgis last year 2022. Problems, Problems, Problems, ugh!
Called tech service at manufacturer. Ugh! Let's just say I'm very disappointed. & that's an under statement!
hi.I currently have a 2008 electra glide ultra classic CVO screamin eagle. it has some sort of amplification for the back spkrs already I belive, will this unit bypass that or work in conjunction with existing wires and harness?
Hi Patrick, unfortunately due to the inconsistency of HD wiring harnesses, we don't show any compatibility on 1998-2013 CVO amplified systems.
I noticed that you used a Y adapter for the Tour Pak and Bag Lid Speakers. Stage 3 is a wonderful setup and I'm looking to purchase this very shortly. I want to know if you can run the same Y Adapter for the front speakers as I'm looking to run the speakers in the Bat Wing and in the Lower Fairing. So instead of a 6 speaker system, it will be an 8 Speaker System. Is this an option I can do or will I need to run an additional Power Amp for the Lower Fairing Speakers? Thanks in advance...
Yes, Terry, you can! The TM400X4ad amplifier is designed to run up to an 8-speaker system (4x 4-ohm speakers front / 4x 4-ohm speakers rear). The kit comes with 2 Y-adaptors, 1 for the front channels and 1 for the rear channels.
I need to know the wiring kit for the stage 3 amp kit for a 2009 Electra glide -
Hi Albert, to confirm, you're looking for the amplifier installation kit for this video (1998-2013 model year Electra Glide) for the Stage 3 audio kit, right? It's the RFK-HD9813. That amp installation kit can be found at: www.rockfordfosgate.com/products/details/rfk-hd9813/
Do you have a video on the 1997 ultra classic?
Unfortunately no, our kits are recommended for model years 1998-2013, so if the video is applicable to your motorcycle, then it should work. The biggest compatibility issue is using factory plastic Harley-Davidson hard shell bags. The speaker line electrical should work because you’re just looking for high level outputs from the radio.
I currently own a 2011 street glide. I have added a complete stage 3 up grade to my street glide (Fairing, Lower Fairing, Saddle Bag Lids, amp, and stereo). I have decided to add a tour pak with OEM speaker pods and RF Speakers to my bike. In this video I see the OEM speaker pods are being utilized. I wanted to know if the volume controls on the tour pak speaker pod are functional?
The included wiring harness used to add TourPak speakers bypasses the factory wiring, so volume control is done directly from the source unit.
I don't have the tourpak speaker holders, but I'm going to get them... which means I'm guessing I don't have any wires running back there yet. What do I do with my wire connections at the 9 minute mark in your video if my wires aren't there to connect to?
Great question Tyson, the rear speaker connection at 9:00 is grabbing [speaker line] audio signal from the TourPak (REAR speakers) to feed into the amplifier input. If you don't have rear speakers in a TourPak yet, just individually tape these off for now. You will need to change the amplifier INPUT SWITCH to 2-CH input. This allows the front inputs to run all 4 outputs of the amplifier, and giving your baglids audio signal. Please note, you will not have front/rear fade capability.
Great Video! I have a 2009 FLHTCU. Has the "problem" with Harmon Kardon cutting out, and I'd like to replace it with an aftermarket system that actually works on a ride, and keeps all the OEM functionality (weather radio, CB, thumb controls). Am I looking at the right unit here?
Hi Robert, Yes the HD9813SGU-STAGE3 is the correct kit for your FLHTCU (verified in compatibility chart). Thanks for looking at Rockford Fosgate to rock your ride! This is a high performance audio system with a full marine grade quality radio. The radio retains the thumb control, has a Weather Band, but unfortunately does not support any intercom system if factory equipped. The below links contain all the details, specs, and compatibility references:
> Kit details: www.rockfordfosgate.com/products/details/hd9813sgu-stage3/
> Here are the details on the radio: www.rockfordfosgate.com/products/details/pmx-hd9813/
@@rockfordfosgate Weather band? Is that feature available?
@@lqqkout4thedude The PMX-HD9813 just has an AM/FM tuner. You can see all the features here: www.rockfordfosgate.com/products/details/pmx-hd9813/
great day ! I'm from Brazil and would it be possible to buy the kit or just the sound system? if you can send it to Brazil .. send me the value and shipping ok in advance Gratitude my bike is an Electra Glider year 2005 .. my name is Adilson
Hi Progredindo, thanks for your interest in the Rockford Fosgate audio system for your H-D. Unfortunately, due to import restrictions, we do not have shipping capability to your territory. I apologize for that.
I see this video is a few years old but is there any way to keep water from running past the speaker into the bag. I didn't see any water barrier in place after the bag speaker install.
Hi Jethro, there is a 3-part gasket seal as follows:
1) Between the grille and the lid
2) Between the lid and the underside bezel
3) Between the 6x9" and the underside bezel
Unless the baglid was cut too wide, everything should be sealed and should not leak water into the bag. If your 6x9" speakers are leaking through the tweeter, we will warranty them for you. However, be aware we're currently on back-order on the TMS69 speakers.
Existe algum negociante do produto 1998-2013 Harley-Davidson® Electra Glide® Ultra Classic® Source Unit, 6-Speaker & Amp Kit, da empresa Rockford Fosgate, no Brasil?
Desculpe, infelizmente não temos um distribuidor em sua área devido aos regulamentos e barreiras que regulam o comércio entre os USA e o Brasil.
Are there any dealers for the 1998-2013 Harley-Davidson® Electra Glide® Ultra Classic® Power Supply Unit, Kit of 6 Speakers and Amp, from Rockford Fosgate, in Brazil?
I'm sorry, unfortunately we do not have a distributor in your area due to the regulations and barriers regulating trade between the US and Brazil.
I know this video i few years old but can I get the newest kit for a 07 street glide for batwing only.
Hi Scott! For the 2007 Street Glide, we have the HD9813SG-STAGE3 kit. You can view the COMPATIBILITY chart and watch the install VIDEOS for the kit here:
• rockfordfosgate.com/products/details/hd9813sg-stage3/
Interested in the pbr400.4d is there any heating issues with the amp on 4 ohm load as a highs amp?
For motorcycle applications? The PBR400X4D is a great amplifier and provides great performance. However, inside the fairing, we recommend the Power TM400X4ad amplifier since it's dual fan-cooled, so you'll never have any issues with potential over-heating:
- TM400X4ad : www.rockfordfosgate.com/products/details/TM400X4ad/
Do you have a system that supports the factory intercom and hand controls?
Hi Mikel, I wish we did, but unfortunately no.
I have a 92 Electra Glide. I want to do a tablet or upgraded Bluetooth 📻.. any advice on what u should look at? I already have 10 speakers 🔊
We offer a Universal Bluetooth Adaptor as supplied with our Road King kits that's perfect for Bluetooth connectivity.
RFBTRCA: rockfordfosgate.com/products/details/rfbtrca/
@@rockfordfosgate im looking for a hole radio set from touch screen that does radio, nav, and gauages
@@JOHNJCLARK You may want to look into replacement source units with Apple Car Play. They will do most of what you want except gauges.
@@rockfordfosgate it would do the naviagation and radio am fm and bluetooth? Could you email me a link to what i need to for a 92 Electra Glide clarkjj99@gmail.com thank you for your time!
@@JOHNJCLARK I'm not 100% sure of all the features since it's another brand of radio other than Rockford Fosgate. I would recommend searching for "harley davidson apple carplay 1996-2019"
Beware if you have a 1998 - 2004 FLHTCUI Electra Glide Ultra Classic with CB/Intercom/Passenger Control (in small print it says this stereo will not work with this bike actually haven't found any one that does make one) you will need to make up a harness (23 pin Female to 35 pin male) and No, no one makes one. Thought I could at least make it a little simpler by ordering a HD9813 but can't order it on line and when I called sales well let's just say it was less then helpful. So off to the internet and I've order pieces to build my own one way or another at least I have 5 months to figure it out :D . Sorry Rockford Fosgate but after using your amp and speakers you let me down on head unit hook up. #Rockfordfosgate #Electraglideultraclassic
Thanks Mst1y. Yes, we show that warning in normal sized print on the product page under COMPATIBILITY:
• "FLHTCU - Electra Glide® Ultra Classic®: 1-Radio not compatible with factory amplified systems, CB, Intercom, rear volume controls, rear speakers on 1998-2005 Ultra’s, and factory equipped satellite radio systems."
Unfortunately we don't make any adaptors to reconfigure between 23-pin to 35-pin connectors. We always recommend to check the COMPATIBILITY chart to make sure the system will be fully compatible with your H-D:
rockfordfosgate.com/products/details/hd9813sgu-stage3/
I have the HD9813 also. Nothing but problems with Stero from day one, smh. What a total let down for me too, ugh!!!
can you use the stock hand controls with this setup?
Great question Vinyl Secrets. Yes, the PMX-HD9813 source unit can be controlled through the factory thumb-control.