Livestream with Speedy (Hall of fame BR shooter)
Vložit
- čas přidán 20. 11. 2023
- Visit my website:
erikcortina.com/
Sign up for my private forum to learn about reloading, wind reading, long range tactics, and more.
www.shootsmallgroups.com/comm...
Get my shirts here:
www.shootsmallgroups.com/merc... - Hry
AMAZING TO ME HOW MUCH KNOWLEDGE COMES OUT OF THESE PODCAST.
It is amazing what a person can learn from just listening to top shooters. Thanks again for Sharing your Info with Us
Our pleasure!
thank you so much as always Eric n Speedy and friends
Our pleasure!
Oh Yeah! Keep'em Small@@ErikCortina
...more, less, or the same? so many gems in this episode, but man, this one is worth a million. Thanks Erik...for offering so much with these videos.
Absolutely great podcast guys!! It would be good to see speedy demo making bullets!! Obviously not fuving his secrets away
Highly educational whenever I hear Speedy explain anything I'm all ears......
Again awsome content love to listen and pick up on things that I miss Thank you and Speedy for all the knowledge shares
Our pleasure!
This was absolutely awesome and a real learning experience!
Glad you enjoyed it!
Great conversation guys!!
Thank you very much for another excellent video.
Thank you too!
Thanks for all you guys do for us not so good shooters
You’re either in the rifling or your not. Find touch and keep it simple. That’s how my brain works. Good episode.
I’d love to have one of these guys check my rifles ignition and timing. I know I don’t have any spring drag. I have tuned the cocking piece and shroud and I think it’s good to go. By tuning, I mean I have remove material and polished the cocking piece mainly where it impacts or rides the trigger sear. Great content, thanks!!!
Speedy I've been reading a lot of your wrightings and books over the last 25 years
So sorry that work made me missed this live!
Next time.
It's fun playing with the components and trying to figure out what works
Just doing some FL sizing and trimming while listening. Appreciate the info gentlemen
Thank you.
It's in the structures in the materials that give different results
Well put , wish I had some time to do a bench gun
Excellent.
Many thanks!
UHMW or Delrin belleville washer on the reverse wound spring maybe?
You come to Lodi,Wisconsin
NICE!
Do you figure just temperature? Or does other factors like water grains come into play ?
You're doing it wrong!!! You pop the top off of the bottle and flick it across the room. It don't go back on the bottle until it's empty, or the sun rises. Whichever comes first. :)
Awesome
Thank you
Isn't the group size the determining factor in tuner settings.
JAM is SUCH a confusing topic that trips shooters up all the time. Great job explaining it Erik. Finding JAM and reducing by 20 thousandths back from JAM will still have you into the lands. I run into shooters that tell me they are jumping by 27 thousandths from JAM, when I tell them they are still touching the lands they argue and say that they aren't. It always make me laugh when they say that.
Glad it was helpful!
As a test this morning I went and measured things again on my 22GT rifle. I didn't need to but I figured, "what the hell". I found JAM 3 times in a row at 2.1005 on my 22GT. Then I decided to test for "TOUCH" to see what the difference would be. I found TOUCH consistently at 1.978" using the "Speedy" method. So the distance between "TOUCH" and "JAM" on my rifle is 0.1225". That whole length of .1225" is considered "INTO" or "IN" the lands.
If I subtract 0.020" from 2.1005" I get 2.0805". So 2.0805 is my starting point to keep me safe from STICKING a bullet. So from there I have 0.1025" to work with where the bullet is still "TOUCHING" the lands. So when I say I'm "JUMPING" my bullet .027", that means I'm jumping .027" from JAM, not touch. I also tested with the Hornady OAL gauge and got a consistent 1.8337" measurement. I think the "Speedy" method for finding "TOUCH" is more accurate because the bullet is held tight and centered in the bore each time, whereas the Hornady gauge will allow the bullet to touch the lands off centered. Maybe if it were a steel rod instead of plastic rod it would/could be more accurate.
What about Borden repeater actions are they that good also?
Yes. That's what I use.
@ErikCortina how do I get on you page
Hey guys in the state of Georgia dare there any Gunsmths an I am not talking about parts assemblers HEIP😊
Look up old dominion custom rifles. They are in VA good people
Good way to kill a sport
This channel was more enjoyable to watch when his ego wasnt so big, and everything wasnt about money
😂😂😂
Cap, keep doing what ya doing Eric, cheers Yogi ✌️🤙🇦🇺