2008 Z06 - Pioneer Head Unit + Back-up Camera Installation
Vložit
- čas přidán 27. 08. 2024
- Hey guys, thanks for tuning in. In this episode we're installing a new Pioneer head unit in a 2008 Z06. This thing is a beast, but its factory radio is very lacking! Thanks for watching!
Here are the links for everything we used:
Headunit - amzn.to/2SVDJnz
Harness - amzn.to/2SUNS3V
Bezel - amzn.to/2Dstbb3
Backup Camera - amzn.to/2JMzfvy
Thanks for the video, y'all gave me the idea of running the camera wires under the carpet and through the tunnel. Beats others running outside the car or along the panels. FYI, you can run the red and ground wire of the camera and connect them along with the PAC harness. Connect the red (hot wire of the camera) to the accessory on the PAC harness and black ground to the ground in on the PAC. This way you won't have to connect the short wire near the yellow camera RCA. It'll allow you to use the camera when stationary and still comes on whenever you go into reverse.
Also won't have to mess with the wires bear the tail lights.
This method also lets you use the camera while going forward. On an Alpine ilx w650
Great video much help
AYEEEE fellow panther
Good video thanks👍
Is he able to use the rearview camera feature while driving forward? The pioneer system I have (AVIC-X930BT) shows that being a feature. It's typically used for monitoring a trailer whilst towing but none the less I was curious.
Almost mentioned the head unit or head unit install in this head unit install video.
Clutch for me make sure you run the blue cable to turn factory amp on lol that's what I ignored
Which color wire is the factor amp????
RIP KOBE
How exactly do you pass the wire through under the hatch carpet? Does it just pull right up?
does this affect the heads up display? i keep reading articles on the internet that it affects HUD, does the HUD still work normally? Thanks
The only thing this effects is the built in navigation that would display on the HUD. That won't work anymore with an aftermarket unit. All other functionality will work fine.
do the base and the steering wheel control work?
Yes but you need the PAC harness that includes those. That is the blue box he was showing in the video.
Do you block that license plate while driving too..lol..i never understood that.. thousands see it weekly :)
Good vid tho !!
@Chase Marlon and I farted twice in long at the supermarket what's your point lol
How much to install in a 2011 GS Corvette
Can you use the stock mic?
You might be able to by finding the right wire but honestly it might not be worth the hassle.
If i dont have steering wheel buttons or bose do i need the rp5
How does this work with the factory subs? I’m thinking of installing the very same headunit in my 05.
Worked good in my bose 08 sound better I used joying new 10.1 double din 720p
Did he say head unit from 1974?
I want to do this install on my 2010. How much would this cost??
You could prob install yourself since there's a shitton of tutorials out there + vetteforums. Only cost would be that of the unit.
would the camera and the unit also work on a 03 c5 vett?
So they don't really mention the head unit install, but I started doing my own and figured out how it works. You get your head unit out, pretty much any 2 DIMM head unit will work in your c5. You need the unit and a wiring harness that is vehicle specific that you solder or crimp same-color wires together. I got two harnesses and neither worked in my car, but I got one from crutchfield on the way. Car stereo stuff is made by and installed by idiots, so who knows. It's likely I'll have to stare at wiring diagrams for a while and make my own harness.
dude you should’ve blurred out the expiration sticker because it displays the license plate number on the sticker 🙁
What kind of mic did you use for the Bluetooth?
We used the one included with the Pioneer headunit.
@@62garage58 Could you help with which wire it really was to splice and connect to the rear camera? Trying install mine this weekend and don't want to run into any issues.
@@talhajaved5886 Hey Talha, sorry I didn't get back to you sooner. I believe it was a purple wire that we spliced into. How did the install go?