Good morning Kpaceguy. It's "damping", not "dampening". Damping is an influence within or upon an oscillatory system that has the effect of reducing or preventing its oscillation. In physical systems, damping is produced by processes that dissipate the energy stored in the oscillation. Dampening is getting something wet. 🤗✊🏾 The Rythmik has quite a few controls! I'm glad you got it properly dialed in.
I subscribed because of how you took the time to explain the WHY you set your settings the way you did So much great info for people that are just getting into HT Great video 👊🏽💪🏽
Great video. I don't have this woofer. I have a much older servo type from Velodyn. 18" however that will wake up a room or two. 😊 I'll definitely have to check my little selection of options. 🥋🤛🤛🤛
Lol - I just found an issue with my settings on my Rythmik E15s and I recommend you check yours again as well - check the switch normal and dual - I also had my set to normal but if you are using LFE you will get better higher frequency response in dual - normal is for stereo so unless you are using a splitter for RCA it will reduce signal power - Normal also invoked the crossover and was rolling off highs on my subs at 80-120hz but when set to dual it is flat to 250hz - I let Anthem and ARC handle EQ work - I also recommend using quick measure in ARC G to confirm and compare - may want to check out the new ARC beta if you haven’t already - it is a big upgrade - auto phase made a huge difference for me
@@Kpaceguy it worked better in dual for me - it will remove the peq but that’s why I have the Anthem and I am all about removing things in the signal path and it should increase higher freq response - I recommend doing test runs in ARC quick measure with ARC off - one with how you have it now and one with it set to dual and see which you prefer
most of those settings are Not available on many subs in the hands of most consumers..they tend to have volume , crossover and phase if ur lucky and thats it... that rythmik has some sweet customizations!!
Low dampening allows the driver more movement for louder volume. High dampening uses more force to bring the speaker into ideal placement for a tighter more controlled sound… it’s actually easier to damage the components with high dampening at high volume. To protect the speaker, use rumble filter and limiter. Dampening is the reason to get a rythmik, but it’s adjustable if you want to go loud vs accurate.
@@Kpaceguy I am looking at a pair of F12s or G22s for my 2 channel system. Your guidance really helped (along with suggestions from Pure Audio Project and their fans).
@@Kpaceguy I’m using a AMBEO soundbar yes I know it’s a overkill! Lol But can I use the same sittings on my? The soundbar has a room calibration if that helps.
I wanna ask, is the G25 worth the extra grand over the G22? I've read that people have said the dual opposed config minimizes the tactile output and that the G22 provides almost no tactility. Does the G25 lose out on the room tactility as well?
I'd say yes. The 15in subs get you a lot more cone area equal to a 21in subwoofer. More power is always nice. A little bigger so you dig deeper and louder. I'll link you to a demo I did with it recently. You definitely get tactile bass with this in all but the biggest rooms. Sealed subs in general lose out on tactile bass but this one impressively fools you. czcams.com/video/6liB1u5b2rk/video.html
I ended up getting dual E15HP2s, which is essentially the same as oneG25HP, per Rythmik. I figure I’d get more tactile response, more even bass response, and they are easier for me to place over a single larger sub. At some point I would like to get a couple more for all 4 corners for more even bass.
That thumbnail pick got me weak When i postion my subs i do the butt crawl meaning i put the sub at my listening spot play the sub while i crowl on my front floor back n forth and side to side until it sounds best i will have a video on this Paul as P.S. audio wants me to post the video also lol
I would have thought the servo controls would stop it getting damaged either way based on what I had read of Velodyne literature, but perhaps I was mistaken.
GR Research sells Servo Plate Amps. If I’m not mistaken he sources them from Rhythmik. I think he sells them as part of kit but I’m sure if you reach out to him he would sell you just a plate amp.
Brian the owner of Rythmik says limiter should always be on and rumble filter should always be on. Just saying 😭😅🤣. 12hz with AVR is good and low damping for HT.
I've got dual f18s. My god they are incredible. Was also surprised how small the footprint is of the sealed versions. I thought about the FV's but completely happy with mine
Good morning Kpaceguy. It's "damping", not "dampening".
Damping is an influence within or upon an oscillatory system that has the effect of reducing or preventing its oscillation. In physical systems, damping is produced by processes that dissipate the energy stored in the oscillation.
Dampening is getting something wet.
🤗✊🏾
The Rythmik has quite a few controls! I'm glad you got it properly dialed in.
Thank you for the humility and sharing your learning experience.
I subscribed because of how you took the time to explain the WHY you set your settings the way you did
So much great info for people that are just getting into HT
Great video 👊🏽💪🏽
I appreciate it. Welcome to the crew
Good going, research and steady improvements is the way to go. Get the best you can from any equipment set!
Great video. I don't have this woofer. I have a much older servo type from Velodyn. 18" however that will wake up a room or two. 😊 I'll definitely have to check my little selection of options. 🥋🤛🤛🤛
To say you had it set up the way you did and still loved it the way you did says a lot about how good that sub is.
I love this thing and will probably fall in love all over again now
Appreciate you covering these seemingly daunting settings.
Good video, I just did the same with my SB3000’s… I changed the system from HT to 2 Channel… There is a lot to these subs.
Keep an open mind and never stop learning ... awesome.
Lol - I just found an issue with my settings on my Rythmik E15s and I recommend you check yours again as well - check the switch normal and dual - I also had my set to normal but if you are using LFE you will get better higher frequency response in dual - normal is for stereo so unless you are using a splitter for RCA it will reduce signal power - Normal also invoked the crossover and was rolling off highs on my subs at 80-120hz but when set to dual it is flat to 250hz - I let Anthem and ARC handle EQ work - I also recommend using quick measure in ARC G to confirm and compare - may want to check out the new ARC beta if you haven’t already - it is a big upgrade - auto phase made a huge difference for me
I do use 2 rca's in lfe. But you think I should still switch to dual?
@@Kpaceguy it worked better in dual for me - it will remove the peq but that’s why I have the Anthem and I am all about removing things in the signal path and it should increase higher freq response - I recommend doing test runs in ARC quick measure with ARC off - one with how you have it now and one with it set to dual and see which you prefer
most of those settings are Not available on many subs in the hands of most consumers..they tend to have volume , crossover and phase if ur lucky and thats it... that rythmik has some sweet customizations!!
REL ACOUSTICS... if you happen to be going through these comments, please send this guy one of your subs.
For years I thought the LFE out would only work if you used a disc with LFE effects so I just used the regular sub outs.
Low dampening allows the driver more movement for louder volume. High dampening uses more force to bring the speaker into ideal placement for a tighter more controlled sound… it’s actually easier to damage the components with high dampening at high volume. To protect the speaker, use rumble filter and limiter.
Dampening is the reason to get a rythmik, but it’s adjustable if you want to go loud vs accurate.
DIY look at GSG subwoofers, I have one 18 mini marty and its enough for a 16x12 room
Glad I finally found your channel. Terrific content. Thank you.
Glad you enjoy it!
@@Kpaceguy I am looking at a pair of F12s or G22s for my 2 channel system. Your guidance really helped (along with suggestions from Pure Audio Project and their fans).
Great job bro & I have the E22 and when you have time I needed your help! 😎👍
Whats up?
@@Kpaceguy I’m using a AMBEO soundbar yes I know it’s a overkill! Lol
But can I use the same sittings on my?
The soundbar has a room calibration if that helps.
I have the E22 Direct Servo subwoofer
Dual 12" sealed.
@@HPMIKE55 i wouldn't copy/paste anyones settings. I'd try my hardest to find what plays well with your room
@@Kpaceguy ok thanks & keep up the great job!
I forgot to ask what’s sound better RCA or the XLR for the subwoofer?
This is a great video. I’ll keep this video in mind.
So far the set ups been pretty good but my question is if I’m using the RCA in the subwoofer should I use the XLR would it sound better or the same?
To the ear it'll sound the same. On paper XLR is typically a much cleaner connection
@@Kpaceguy thanks bro your the best & keep up the great job! 😎👍
@@HPMIKE55 I appreciate it
Music and movies don't mix on a set subwoofer setting! Good advice!
Rythmik has a plethora of settings. I love how these subs can be finessed!
I wanna ask, is the G25 worth the extra grand over the G22? I've read that people have said the dual opposed config minimizes the tactile output and that the G22 provides almost no tactility. Does the G25 lose out on the room tactility as well?
I'd say yes. The 15in subs get you a lot more cone area equal to a 21in subwoofer. More power is always nice. A little bigger so you dig deeper and louder. I'll link you to a demo I did with it recently. You definitely get tactile bass with this in all but the biggest rooms. Sealed subs in general lose out on tactile bass but this one impressively fools you.
czcams.com/video/6liB1u5b2rk/video.html
I had the same question. Why would a bigger woofer and box create tactile base? Isn’t the dual opposing design the reason it’s not tactile?
I ended up getting dual E15HP2s, which is essentially the same as oneG25HP, per Rythmik. I figure I’d get more tactile response, more even bass response, and they are easier for me to place over a single larger sub. At some point I would like to get a couple more for all 4 corners for more even bass.
SVS & Rythmic should have a child, Imagine the Rythmic you can control via an App.
I have 2 FV15 Piano Black. I’m about to set them up again. They aren’t set right.
That thumbnail pick got me weak
When i postion my subs i do the butt crawl meaning i put the sub at my listening spot play the sub while i crowl on my front floor back n forth and side to side until it sounds best i will have a video on this Paul as P.S. audio wants me to post the video also lol
Great job bro but that subwoofer takes to mush work to setup!!😂 lol
It's a lot to get right
The manual is on their website with setup instructions.
I would have thought the servo controls would stop it getting damaged either way based on what I had read of Velodyne literature, but perhaps I was mistaken.
Nope I almost blew it playing really low for an extended period of time. The voice coil got very hot.
Dude! I have never seen a sub with all of that in the back!
GR Research sells Servo Plate Amps. If I’m not mistaken he sources them from Rhythmik. I think he sells them as part of kit but I’m sure if you reach out to him he would sell you just a plate amp.
It's the cost of one that I wouldn't be fond of
@@Kpaceguy ah. Understood. Either way, DIY subs are a fun project and an incredible value if done right. Enjoy.
Obviously, someone who is not overly troubled by the use of adverbs!
A case of RTFM? lol, it happens...
Smallish? I wish I had the space for that. It’s hard to visually hide something that size even if I had the space.
I would want to put it front and center with an accent light shining on it... if the sound was best with it. ...grill off of coarse :D
Brian the owner of Rythmik says limiter should always be on and rumble filter should always be on. Just saying 😭😅🤣. 12hz with AVR is good and low damping for HT.
Like you know anything Tristan.do one
@@winfield347 living rent free in your head😅🤣
You should call it the Rythmimic. :)
I love it
L feel free to steal that!
😎👍
I've never seen a sub with all these features .. is it a professional model ? It must cost a fortune !
$2700. Most subs have it built into an app
I love my 2 Rythmik FV18 Rev2 paper cone subwoofers
Shame your speakers dont match up.loser
I've got dual f18s. My god they are incredible. Was also surprised how small the footprint is of the sealed versions. I thought about the FV's but completely happy with mine
@@winfield347 Living rent free in your head🤣😅. Nice name😅
Rythmik subs have so many tinkering controls on the amplifier on the back. Totally understandable.
😈😈😈😈😈😈😈😈😈😈😈😈