*BIG UPDATE* - New FlyByWire A32NX FMS v2 - Now Available! | MSFS 2020
Vložit
- čas přidán 6. 09. 2024
- FlyByWire have been working very hard on their FMS v2 and now finally, it is here! This will pave the way for so many more new real life features. In the video, we take a look at some of the new additions and discuss what is to come now this new FMGS is available in what is now argubly, the best A320 Neo in MSFS 2020.
Channel supported by:-
Contrail Shop:- 10% off EVERYTHING:- Discount Code:- AF-4755
contrail.shop/... - Featuring scenery & add-ons from major developers.
Inibuilds - store.inibuild... (support the channel using the link to purchase amazing scenery & aircraft)
Aviation Aisle:- aviationaisle....
(support the channel using the link above & get 10% off really cool Aviation Merch!)
SIMSMART A320 Performance Calculator: simsmart.uk/
Thrustmaster:- www.thrustmast...
Orbx:- marketplace.or...
Aerosoft:- www.aerosoft.c...
REX Simulations:- rexsimulations...
Flightbeam:- www.flightbeam...
Livery Creator:- flightsim.to/p...
DONATION LINK (if you wish!)
streamlabs.com...
FREQUENT FLYER? You can now join the Easyjet Sim Pilot Channel & become a member, earning you extra perks along the way:- • Supporting the Easyjet...
DISCORD LINK:- / discord
Finally an update! I was afraid FBW had stopped their amazing work!
Fantastic demo of FMSv2! Thank you Gavin!
So basically FBW made the Enhanced A320 that comes with the simulator obsolete.
The FlyByWire team really never disapoints!
Thank you Gavin (for another time 😄) !!!
Back to the Airbus Gav, Phew 👍
If this plane had the inibuilds external model I'd actually fly it but with the default A320 I just can't
You'd hope a port might be eventually possible...
@blackieblong8334 it's not their fault really. I admire their work. I'm learning software engineering rn. I hope to one day be able to help as well. However that default A320Neo external model underneath the amazing work in the cockpit bugs me cause it's inaccurate. It doesn't help that I fly the fenix a lot
The Inibuild’s sound just sounds off to me!
@GG_Booboo I only want the external model of inibuils with FBW sounds and Avionics improvements. They're all over the place 😂😂
@@GG_Booboothe iniBuilds A320 has a significantly better model though. The sounds and systems aren’t as good, but the model is far superior.
I have the Fenix and the Inibuild but for me, the FBY is my go to -even more so with the MCDU update. Thanks to the team for their continued support and hard work 🥳👍
Y better than the fenix?
@@TrooperA1868it isn’t, it’s not even close.
@@WhiteHawk77 that’s what ima saying I just wanted to know y he would say that lol
@@TrooperA1868 I can only assume his PC isn’t strong enough for the performance he wants in the sim and the Fenix A320 is one of the heavier aircraft to run because of its complexity. That’s the only reason I can think of to choose a improvement mod over the most high fidelity aircraft in the sim.
@@TrooperA1868 I didn’t say it’s better than the Fenix A320 but it better suits my current system.
Thanks for the video. Just updated and making a flight right now. By the way don´t know if was some MSFS update or FBW but is much better in performance, at least for now.
good to see even more improvements to the A320 even though their focus is likely getting the A380 out before MSFS2024 releases.
could u make a video of Parallel 42 - A320 Immersion
Seconded!
Love it! RNP one day soon?
Barty
That's what they said. We are really hoping. it's one reason I fly the Fenix...
I wanted to use the inibuilds A320neo but it’s too heavy on my fps so I have to stick with the FBW, still waiting for their new RNAV RNP functionality and new model, hopefully better performance with the FBW model A320neo.
I would love it if they put a cabin on this. That’s be awesome for my content
Thanks, but I still can't manage to land. There's always something wrong with the arrival. ATC gives me a different runway than the one in my flight plan. It's always stressful. I don't know what I'm doing wrong. 😅
@@Pretender_Gamer default ATC is pretty rubbish and not always correct. Changing runways however in your flight plan is straight forward and should be done in exactly the same was as you get it on the ground.
@@Easyjetsimpilot thanks for reply, so if MFS ATC telling me different Runway, I can change it in MCU, but how do I can now VIA or STAR? Because when it goes straight where I`m not nicely by side and land... sorry, I`m new to use "full setup" of light
@@Pretender_Gamer when your on the arrival page, and you select a new runway, you can change the STAR too if required. Then use the left/right arrows to move pages to select a new VIA
Out of interest - What happened to this V2? it doesn't seem to be available here in August 2024.
Hello, thanks for sharing the tutorial, it helps a lot, I have a question, when should I use the SimBridge? Whenever I use the Avion FBW a320X? Thank you very much in advance for your response, as always the best explanation ❤️
you use simbridge when you want it connecting to outside source for the terrain map, and also if you want to use the MCDU on your tablet etc.
How do I update were I get dev version is ther a link
I thought they have integrated the secondary FP.
Gav do u have any confirmation on the release date for the A380? FBW recently showcased a full flight in FSExpo
It does have a limited secondary FP to put in single engine return. and I don't think there is a time for the 380 yet
@@razorseal ok but why the time for 380 has not come? I found the demo proved that it's ready for release?
@@pilotpawancapparently it’s not fully A-to-B ready yet. core team members said that certain parts of the FMS that are unfinished. Also if you look at the GitHub repo (a380 systems/avionics are alr open source), you’ll notice that basic functionality like the transponder is still being worked on, even though the aircraft as a whole looks complete in the previews
We got secondary flight plan in the a32nx before gta6
Excellent Video!! However, my Flyby wire aircraft has been invisible since the release/ purchase of the Flight Sim 2020 !
think I read somewhere that you may have two copies in the community folder of the FBW that causes this, and you have to uninstall the one from the store and just use the installer version?
Please see czcams.com/video/mSt4z3yCwBI/video.htmlsi=1CSsLmTYSQ2nQrlG
So which version is better; stable or development!
the co routes not work! why
@Easyjetsimpilot hello, on what branch does fms v2 implemented?
Thanks for your great videos. You are my number one go to person on CZcams. May I ask a quick question? With the new version, I am having a problem at TD, that when I set the lower altitude and select managed at TD, my plane does not descend (which it used to do in the old version). Is there a change in V2 that I may have missed?
You need to push the ALT knob for managed to Decent mode or Pull for Open Speed. It will never start to descend on its own without pilot input (it's not a Boeing 🤣)
@@Easyjetsimpilot I do push the ALT button (sorry didnt mention that in my description)
@@stevenlatham782 then check that the FMAs show that your aircraft is in DES mode.
So, at this point, which FMC is more "complete"? The iniBuilds version or this one? And what is still missing that the Fenix (or real plane) has? Is it just RNAV/RNP approaches and independent MCDUs and then we're "done"?
No. Fenix has a dynamic engine model. Heat soaked engines can start fault. Either no ignition, high egt, etc. it'll auto crank. It really doesn't compare in detail.
@@noway9880 Yeah good point about the engine simulation.
Do they have the sec flight plan working now?
Hello do I have to delete the old version and reinstall the new version 2 thank you
Somehow after installing the fbw 320 it doesn't seem to appear onto my aircraft selection list when I choose a plane I want to fly in world map. Any ideas how I could fix this? Tysm ❤
Did you place the FBW folder in your Community Folder in MSFS?
I just wished they made it obvious what was changing in the dev version, neither discord, or github make it obvious.
@Easyjetsimpilot, I used today (think it had the update on as I use dev mode)
But i had a few issues going to Glasgow (and i think i know the answer) but as I'm not paying for the Navigragph sub atm, the airac used on simbrief is AIRAC 2303 (but the MCDU has the 2406) in it so had issues with Glasgow runway 24 on Simbrief but in apprioaches only runway 23 and invalid whenever trying to select) I assume as the airac dont match & glasgow may have changed but seemed on it was from 24 but only 23 in plane?
Is there anyway to role back the AIRAC in MCDU to match simbrief or am i just unlucky & only fix is the full Navigrapgh?
So I had to divert to Edi EGPH which was a bit of a mess (as although i could do direct too and EGPH set as Alt I weanted to clear Galsgow and it got a but messy for me but I made it to appoach (trying auto land) but like a 200 feet it turned off with red autoland warning and sent me flying off to the grass on right? oops maybe it not cat II/III or something but would have thought it was.
Thanks for showcase update and keep practising.
I had the same issues trying to load any approaches to Glasgow in the FBW. Both 23 and 05 - ILS, LOC etc none of them worked, it just said invalid
@@My320Sim Ooh not just me then, :) well as I was using free simbrief and old AIRAC and noticed the one in the plane is 2406 I assume its the miss match but not sure if I can roll back or match it database with the free simbrief one, I'm too poor atm to sub to Navigrapgh but have always wanted it.
@@Lone_GamerUKbuy a one off AIRAC.
Why not the MCT transition for Manchester?
Because this proceedure is only really used if you've lost comms and need tk fly the full proceedure.
In the UK, the STARs do not take you to the ILS intercept point and usually leave you a few miles out in a hold. From here, in real life, ATC will pull you off the approach (STAR) and give you headings (vectors) to fly to intercept the ILS.
If you lost comms, you would fly to the final waypoint on the STAR, then to the MCT VOR on the airfield at Manchester then fly the full ILS proceedure on the chart (the tear-drop looking approach)
Always no RNAV approach yet
The last update is not working properly,Before the MCDU calculated the v1,vr,v2 speeds but now are not working🤬
This is because of the takeoff calculator in the EFB that is now available. You need to use this rather than the unrealistic way of using default values from the MCDU.
@@Easyjetsimpilot Thank you 😁👍
Could you exsplain the vectors of egcc ❤
In the UK, the STARs do not take you to the ILS intercept point and usually leave you a few miles out in a hold. From here, in real life, ATC will pull you off the approach (STAR) and give you headings (vectors) to fly to intercept the ILS.
If you lost comms, you would fly to the final waypoint on the STAR, then to the MCT VOR on the airfield at Manchester then fly the full ILS proceedure on the chart (the tear-drop looking approach)
@@Easyjetsimpilot thank you so much ❤️
Where is the update?just started my fbw installer and didn’t get any notice to update
It's a developer build, not a stable release
Do the MCDU's operate independently now or both still show the same page etc?
still mirrored
Nope, you can just see the MCDUs moving together around the 6:25 mark. Seems like we can tick "waiting for V2 FMS" off our list of excuses for not implementing independent displays or for that matter a performance calculator in the EFB.
@@I_Evo "excuses"? Typical mindless troll. Lets see you do better. Until then, just sit quietly in the corner.
The cockpit buttons look off. Were they updated?
as i dont have the installer: is it the development build or the stable release version?
as per the video, development mode
Shouldn't it show Man TOGA, SRS GA TREK? instead of NAV
New MSNs now automatically go into NAV mode upon GA. The older models used to show GA TRK and then you'd push the HDG bug to select NAV mode.
When will they implement the secondary F-Plan?
This one has it.
@@razorseal I don’t think so otherwise he definitely would have shown it
the plane looks so tiny after flying the 777 yesterday all day
Is it now available to download on the FBW installer?
FlyByWire Simulations has announced the release of their entirely custom FMSv2 for the A32NX into the Development Version.
Not everybody can/wants use Simbrief
You're missing out big time
@@Mr.Martini549 I am not so rich
Did they include the secondary flight plan as well?
Apparently so, yes.
Not yet
@@D4rthDuck It literally says "Introduction of alternate flight plan capability" on their website.
But it's not yet activated.
Yeah just confirmed they did not. But I'll bet it won't take long for them to get there 🎉
I do not see V2 in the installer. Only version 0.11.1
It's not new version of aircraft itself , its development version update i think .. version a316777 is the newest one
Taylor Edward Jackson Daniel Clark Richard
Best airplane money can buy for this price. (for nothing).😀
is it out yet? not appearing on the installer
as per the video, development mode
STILL mirrored MCDUs?? Come on FBW 😂
dude, they're working on it. You dont need 2 anyway.
@@budguy21not needed but usefull
@@budguy21 it’s not an unreasonable ask considering this project has existed almost since the release of the simulator. Not saying it’s a bad aircraft or anything and i’m sure a lot of dev efforts have gone into the A380 which i’m sure will be amazing. But come on, it’s been almost 4 years since the project started…
@@madmaxaviationit’s literally a free project and the people that make it have jobs, go to school, etc. Still they make their plane more accurate than PMDG and and fenix. Just have a look at their code
@@madmaxaviationthey do more Important things First you know
What OFP format do you use
EZY
@@Easyjetsimpilot thank you
Big update.. small impact 😢
Flying the new Pmdg 777 so much I forgot abt this 😂😂
Bruh if you forget that easily you shouldn’t be simming
@@Deezorz why u mad?
@@Jetset_hd ur just cringe lol
@@Deezorz stay mad lmao
@@Jetset_hd ain’t nobody mad except you for forgetting how an airbus (easiest airliner)works after flying the 777 for a few days
FAKE news! There is no update in my FBW installer.
Have they added RNAV? Otherwise pass again. This is becoming laughable.
Not sure about you, but their A320 has become so irrelevant to me with Fenix and PMDG. The only thing I look forward to from them is the A380.
And even more so now we have the V2 default in the sim thanks to Inibuilds.
Yes, but just remember the huge amount of work these volunteers do to make a nice aircraft for the community.