Video není dostupné.
Omlouváme se.
Blue Line Garage - How to Install Wheel Spacers on a ATV / UTV Polaris Ranger Crew 1000 (EASY)
Vložit
- čas přidán 12. 08. 2021
- This is pretty simple installation video on how to install wheel spacers on a Polaris ranger or any vehicle for that matter.
Thank you.
nstagram:
/ bluelinegar. .
Facebook:
/ bluelinegarage
Facebook Group:
/ 21005. .
Twitter:
/ garage_line
Website (Merch):
www.BlueLineGarage.org
E-Mail:
BlueLineGarage101@gmail.com
Just my 2 cents and i have been working on ATV's and motorcycles my whole life, first off do not use red locktite use the blue, also I always put the bolts on hand tight just to make sure it lines up all the way around the spacer, also i always torque the bolts to spec thats just how i do things. Sidenote i jsut recently did my buddies RAZOR 1000 XP, we removed the sway bar and added walker evan shocks set them really soft, we installed some new 28 inch tires, and it rides like being on marshmellows cannot feel any bumps at all, and riding behind him through some rocks and sme creek crossings it looks like a spider, we did get some high speed body roll when going about 55-60 and making quick turns, so we stiffened up the shocks a notch or two and now it does really well, with all this being said a wheel spacer WILL NOT FIX ANY TRACTION ISSUES all a spacer will do is allow a little more room for larger tires, and give you a wider stance for stability so keep in minds kiddos do not believe everything you here!!!!!!!!!
Hear? yes that is true but I also like don't believe everything you read as well. the spacers were really for stability and it sure did help from feeling the thing would roll over on a turn going moderate speed to feeling secure after the spacers installed.
Brave on sending straight on with a impact, instead of starting it with your fingers first. 😮
💯love the “garage” Blue Line🤟🏻
No torque specs?
Good job!
Hello, i have a 2023 Polaris 1000 ranger premium, do you know if these will fit, or how do i measure the bolt pattern, thank you for your time..
Also don’t start your note with the air gun put it on with your fingers first. Good God
Note? Or bolt?
The Loctite goes on the first three threads not the very back! The nut is not even going to reach it
More the merry I say.
I hate critiquing people in their videos, but it killed me watching the loctite not even being put on the threads that the nuts will be on.
Was that the recommended torque spec? :)
Blue Loctite....not red. And what are the torque specs? Starting nuts with the impact? LOL
What type of socket to use
What size tires u running
No torque wrench? 🤡
Guestimation is more accurate