Add USB 3.0 Charging to Your Vespa GTS
Vložit
- čas přidán 7. 08. 2024
- USB Jack: www.scooterwest.com/twin-usb-...
GTS Interface 2015 & Newer: www.scooterwest.com/power-plu...
All Scooterwest Power Plug products: www.scooterwest.com/catalogse...
For the largest selection of parts and accessories in North America, please visit our website:
WWW.SCOOTERWEST.COM
Thanks for viewing! - Auta a dopravní prostředky
Greetings from Japan! Saw the video a few weeks ago, ordered it, and installed it in about 15 minutes. Thanks Robot and the Vespa Motorsport team!
New year greetings to Radar and all the crew - from Joe in Perth, Australia. Thanks for all the great videos, tips and techniques.
Happy new year!
On my GTS 300 (MY2019), it was easier to remove the fuse box to gain access to the USB connections and fit the PP11 harness as the necessary pug was clipped to the back of the fuse box mount !! Otherwise super easy mod and the PP11 harness makes it a very clean install. Thanks Robot & ScooterWest, keep up the great work !!
I managed to take it out of the harness on a 2019, cables are held in place by a triangular harness that you can try to work out of … by sliding out and putting little force you can see them via the side vent tucked in . Hope that helps
Literally took me 15min to knock out. Awesome vid thank you
Parabéns pelo seu vídeo, vespas eternamente.
Um excelente ano novo para você e sua família.
Do vespeiro DINELLI do Brasil
Last video for the year!! Happy new Year Robot! 🤖🍻🍻🍻
Same to you!
Thank you Robot, USB socket and wiring already arrived and installed easy within 10 minutes. Everything works on my gts 300 perfectly. Thanks for installation video advice.
Great to hear!
I made access to USB wiring by uninstalling blinker light - just advice for others.
Nice option, Robot. Two points, though: (1) I've found the built-in USB port on my 2015 GTS300 does a pretty good job during my 30-40 mile jaunts for my phone (Samsung Galaxy S-10e now); (2) The limiting factor I've found in charging is the cable - the higher-quality the better. I found a flat cable that doesn't impede charging, but still allows the "glove-box" door to fully close and lock with little effort. (And, a quick plug for Quad Lock: have one, love it.)
Mmm that trail in the other bay😍
Happy New Year 2021
I know what I’ll be adding to my Vespa this spring.
It's spring! hope installation goes well for you.
Happy new year Robot 👍👍👍👍
Happy new year
Buen vídeo felicidades!
Great T-Shirt!
I mounted a marine 12 volt socket on the side panel of my scooter cause it had a hole there the perfect size. I run a cb and tyre pump etc
I always worry about the cable getting tangled with that setup. My next mod to my scooter will be running power out of the headset right by the mirror and connecting the Ram Mount with Qi wireless charging.
I have Vespa Elegante VXL 150 it seems to get a bell ringing or metal noise from the Clutch area, this was bought a few days back as a brand new bike. Highly appreciate your thoughts on this :)
Thanks Robot!
You bet!
Great vid... my 2010 steringlockndoesnt work what can i do also the glovebox doesnt open.
Sir can you make a video for the piaggio liberty S. How to we install charging on Liberty S 50cc?
Any idea if and when you will have a version with USB C ports?
Can the harness be used for taking power to fit heated grips?
Hi Mr. Robot My Piaggio mp3 every came USB jack! I am going hook two UBS charges one to mirror mount & other one on side of body on scooter! I be hooking up solar panel on top case for keeping battery charges!
Is there a way to upgrade the USB outlet on a 2021 Primavera 50CC?
I ordered the parts based on the vid and even had Scooterwest pre-drill the hole, BUt after removing that lower panel I'm not able to get the cover to close. The rear of the USB plug butts against something. Is this made for the GTS300 Supertech 2021?
I have a GTS250ie. I installed the older kneepad USB kit that had a pigtail to connect to the alarm connector. I bought this same amazing faster USB outlet and put it in place of the older "Slow" USB and noticed that the wire in the alarm connector is a very small gauge. Will that small wire support the draw needed by the heavier wattage faster USB? Will I pop a fuse or toast wiring with the faster USB?
Do you have a connector to just upgrade the USB already installed on the Vespa?
Robot, consider a vid upgrading the USB in the glovebox to 3.0. Thanks.
Agreed! Or snaking out the headset to a Qi charger mount. That is my next project.
So this plug will fit on the sprint primavera? The site shows only GTS models
How do I find the scooter harness for a 2012 GTS 300 super it looks different behind that panel will I be able to use the adapter harness that y'all provide pp11 plug & play my model Vespa doesn't come with a USB harness behind the panel
Will this work on a GT200? thanks Robot!
Great movie thanks ! You sell products in Europa try Amazon ?
Is it possible to use that connection to charge the Vespa battery?
To which electric line is the usb charger connected and can an additional headlight be connected to the same electric line?
Do they have a USB C plug in?
Hi, do you know, if it is possible to use this (or any other) kit to GT 2003 model?
Is this ok for the GTS300 Supertech 2020?
Do you have a part nbr for the predrilled complete kit?
Can it be installed on a vespa S 150 2011?? Thank you!
When will these be back in stock?
Would this work for a 2010 GTS 300?
Hi Guys, can you do a video on how to remove and install Vespa Primavera Rear Mudguard please? The one that's attached to the rear tyre.
This video covers it: czcams.com/video/txsMAaiUvs8/video.html
Nice
Thanks
Can I add to Liberty 150?
Bonjour. Je ne parle pas allemand : quelqu'un peut-il me donner les références de la cablerie "PP11" pour raccorder la prise USB ? Merci
👍🏻
When fitting the 12v adaptor remember to fit it low to the right otherwise the wires can push against the square modules that are located inside to the left of the knee pad area.
Has not USB port this model inside?
Any possible issues for water to sip through the hole?
Shouldn't be any issues as there is a rubber gasket in between.
😉😉😉👍👍👍
Hi robot 🤖 could this be done on a Vespa px 200
will the voltage indicator be a parasitic drain?
It has to have some drain to show the display, I'm more curious if it has any in the switched off condition. Since this has no "remote" turn on capability like TV's and such electronics I would suspect it does not and "off is off". I just swapped my Euro cigarette style outlet for one of these on my recently acquired Buddy 125. It has a 1amp fuse for the OEM switched connection so I ran an always on line from the battery with the SAE style heavy wire with inline fuse support to the 3amp capability of this unit.
This clip is Designer approved ✅
🛵❤️🤖
Are you able to get a navy blue seat for the Vespa 150?
just remove the left turn light.....access easier
Ram mounts suck peak design has the best phone mount