I've been having problems with plan sales so I have begun selling with Etsy. This also means you can buy plans with PayPal. Check out my store here: www.etsy.com/au/shop/ParabellumArms
Do you have any video explaining your blowback rubber band gun mechanisms? Such as that in your mag arm 1 submachine gun, how does the mechanism actually work?
hey parabellum, i love your videos! they have inspired me to create some of my own videos, but one thing i would like to know is how you come up with your designs. do you just think of them, or do you draw up plans?
my gawd rubberband guns came along way and there still kicking i cant believe it but i just made a popsicle stick pocket pistol rubberband gun found it somewhere here on you tube it was simple enough to make so i made one
i have been subscribed to your channel for a long time now and now would like to build one of your models do you have any advice on the methods i should use and the equipment that i need?
+parabellum1262 that would be very use full as I and a number of my friends would like to attempt lots of projects like yours but we lack the skill and the knowledge of what equipment we would should buy
Is there a notch on the fixed part of the frame (upper 'rail') near the front end where the front sliding part can 'latch' on to when it is under tension from the loaded state? Or is it just held locked towards the front with pure friction?
Are these the plans that are needed to build your M1 Garand? Or is that a separate tutorial that you're still working on? I know the body of this gun isn't for the garand, but the mechanism look similar?
There isn't a tutorial for the Garand because contrary to what many people think, this is the improved version. The trigger on the Garand is far too heavy.
Hi parabellum, I'm running into problems. When I cut parts on my scrollsaw, I'm getting a lot of tearout despite using a selfmade zero clearance insert, same for the drilling with backing. Makes it look rubbish, inaccurate and a lot of your designs, that I like to modify, are really based on accurate and crisp lines. How do you personally deal with this problem, do you have some tips and tricks? I'd love to hear from you. And remember: Si vis pacem, para bellum!
I use a scrap piece of thick MDF for drilling. It just sits on the drill press table and I hold the parts down with my fingers. The MDF serves as backing and I get no tearout. For drilling larger holes, I clamp the parts onto the table so the drill doesn't wander. You'll see that early on in the video. You need to move the backing plate each time you drill so that the bit punches through into fresh wood each time. Not sure why your scrollsaw is doing that. I fitted an MDF plate to it so the blade passes through a 5mm hole but a zero tolerance insert should be better. Try to cut with the grain when you cut angles and curves. I don't use particularly fine or good quality blades either, but different types may work better. Having only bought my scrollsaw a few months ago, I'm definitely not an expert on the topic but I hope that helps!
vicoshel Have you considered local interstellar commercial layovers? Not too bad sitting in cargo as long as you can deal with possibly being crushed alive. Other than that, quite comfortable.
Привет чертеж обоймы куда резинки одеваются и крючок с зубьями чтоб они могли выстреливать сможешь именно этих деталей дать чертеж бесплатно хочу применить его в своих изделиях. Пожалуйста очень нужно если не сложно.
Matthew Green Give a man a fish and he eats for a day. Teach a man how to build his own precision clip-ejecting band rifle and all which stands in his way shall burn in the forsaken fields of retribution for all eternity.
![Tutorial! AK 47 Part 2 [rubber band gun]](http://i.ytimg.com/vi/nCLE3HV4C48/mqdefault.jpg)
I've been having problems with plan sales so I have begun selling with Etsy. This also means you can buy plans with PayPal. Check out my store here:
www.etsy.com/au/shop/ParabellumArms
great work - totally want to see you shooting it in the beginning before you get into your tutorial.
I love your huns but can you also make a tutorial about your m1 garand
Impressive! Well done project and vid. Thank you for sharing.
Do you have any video explaining your blowback rubber band gun mechanisms? Such as that in your mag arm 1 submachine gun, how does the mechanism actually work?
im wondering if you make this with a cardboard box
I was wondering the same thing but from stores
Wow your have a god hand very cool
hey parabellum, i love your videos! they have inspired me to create some of my own videos, but one thing i would like to know is how you come up with your designs. do you just think of them, or do you draw up plans?
I draw up plans for everything. The more I plan, the more likely the gun will actually work properly in the end.
cool :D
omg it is amazing
my gawd rubberband guns came along way and there still kicking i cant believe it but i just made a popsicle stick pocket pistol rubberband gun found it somewhere here on you tube it was simple enough to make so i made one
Shit dog, I have a laser cutter, I'ma just cut this out and glue it together!
Can you give m1 garand tutorial plz!!!!!!!!!!!!
i have been subscribed to your channel for a long time now and now would like to build one of your models do you have any advice on the methods i should use and the equipment that i need?
I've thought about making a general advice video about the tools and techniques that I use, do you think that would be helpful?
+parabellum1262 that would be very use full as I and a number of my friends would like to attempt lots of projects like yours but we lack the skill and the knowledge of what equipment we would should buy
Is there a notch on the fixed part of the frame (upper 'rail') near the front end where the front sliding part can 'latch' on to when it is under tension from the loaded state? Or is it just held locked towards the front with pure friction?
Yes, there is a notch that the front sight/hook pivots into under tension from the rubber bands. It's explained at 11:58, albeit too briefly.
Oh now I see. I must have missed it. Thanks mate.
P.S. You're a genius for coming out with this simple yet efficient mechanism.
hi i'm from brazil how can i buy yours plans to made this and the others Guns (sorry my bad english ) i love your videos
Are these the plans that are needed to build your M1 Garand? Or is that a separate tutorial that you're still working on?
I know the body of this gun isn't for the garand, but the mechanism look similar?
There isn't a tutorial for the Garand because contrary to what many people think, this is the improved version. The trigger on the Garand is far too heavy.
parabellum1262 i want pic of gun sent me plzz
Hi parabellum, I'm running into problems. When I cut parts on my scrollsaw, I'm getting a lot of tearout despite using a selfmade zero clearance insert, same for the drilling with backing. Makes it look rubbish, inaccurate and a lot of your designs, that I like to modify, are really based on accurate and crisp lines. How do you personally deal with this problem, do you have some tips and tricks? I'd love to hear from you. And remember: Si vis pacem, para bellum!
I use a scrap piece of thick MDF for drilling. It just sits on the drill press table and I hold the parts down with my fingers. The MDF serves as backing and I get no tearout. For drilling larger holes, I clamp the parts onto the table so the drill doesn't wander. You'll see that early on in the video. You need to move the backing plate each time you drill so that the bit punches through into fresh wood each time.
Not sure why your scrollsaw is doing that. I fitted an MDF plate to it so the blade passes through a 5mm hole but a zero tolerance insert should be better. Try to cut with the grain when you cut angles and curves. I don't use particularly fine or good quality blades either, but different types may work better. Having only bought my scrollsaw a few months ago, I'm definitely not an expert on the topic but I hope that helps!
I'll try my best to find a solution to this. Thanks for the responce, I'll respond after I try it out!
it would be helpful
Hi parabellum, I like your videos very much! Please tell me where can I buy your guns? thankyou
I have a few that I want to sell, but you'll here about them in my next video.
+parabellum1262 I was just about to ask if you were going to sell any of your creations
i would to buy your blue print but in my country some of your recommendation for materials is not exist
vicoshel Have you considered local interstellar commercial layovers? Not too bad sitting in cargo as long as you can deal with possibly being crushed alive. Other than that, quite comfortable.
Привет чертеж обоймы куда резинки одеваются и крючок с зубьями чтоб они могли выстреливать сможешь именно этих деталей дать чертеж бесплатно хочу применить его в своих изделиях. Пожалуйста очень нужно если не сложно.
The blueprints don’t include the cut-out for A1 and A2, Can you help me with that? Like, giving the dimensions?
Measure the length of them off the main blueprints i.e. the one spread over 3 pages.
thanks!
Hi parabellum,
What is the size of the rubber bands used by this gun?
Size 16
Hey, can i actually cardboard instead of wood ?
I don't recommend it.
This gun is the combination of the M1 Garand and the M1887 shotgun
Playing far cry ?
Can i buy the PDF with paypal ?
I can buy this gun from you?
No.
3:38 damn boi, you got some harry-ass arms
Ooh i thought the title meant that i need to pay $6 for plans and stuff
Can you just sell the finished guns?
Matthew Green Give a man a fish and he eats for a day. Teach a man how to build his own precision clip-ejecting band rifle and all which stands in his way shall burn in the forsaken fields of retribution for all eternity.
i want to be you
@@Krystalmyth wat r u saying?!!?!
I tried to build one of youre guns, takes way too much Time for me lol
Jai hind 🇮🇳.
TUTORIAL DESERT EAGLE PISTOL PLZ!!!!!!!!!!!!!!!!!!!!
bom
mediafire
quem rtb
guys who can throw me pls