Learn The Best Way To Clean Your Throttle Body-Why Pay Hundreds When You Can Do It For Free

Sdílet
Vložit
  • čas přidán 24. 05. 2016
  • I show you how to remove and clean your electronic and cable throttle body. I cleaned my car throttle body and boy did it make a difference. My car had a rough idle and was hesitating bad. The hesitation has stopped and now my car is running very smoothly again. I feel like I gained more horsepower. I had an OBD2 code p0300 random misfire that went away after the cleaning.
    Create Your own stories raw.film/?ref=charlesbooker
    Treat Oxman to a bottle of water paypal.me/oxmanagain?locale.x...
    Autel Code Reader Diaglink ( amzn.to/2xtX9r9
    CRC throttle body cleaner amzn.to/2hAsT3i
    In the video, I show how to clean an electronic throttle body on my Cadillac STS and Cadillac Escalade. I use throttle body and air-intake cleaner from CRC to cut through the built-up carbon on both.
    For best results take your car throttle off the intake manifold and disconnect from the wire harness. Then spray CRC throttle body cleaner on the throttle in a well-ventilated area while wiping with a clean towel. Repeat until you have a clean shine.
    If your car is shifting funny you might want to change the TPS ( Throttle position sensor) and if your car is idling high or low you might want to change the IAC (Idle air control valve)
    In this video, I'm going to show you the best way to clean your throttle body. Throttle bodies are dirtiest near the throttle tip, and this is where the air fuel mixture passes through. By cleaning your throttle body, you'll achieve a smooth idle and reduce gas and emissions.
    This is a simple but effective way to clean your throttle body, and it will save you a lot of money in the long run. So don't wait, learn the best way to clean your throttle body today!
    In this video, we're going to teach you the best way to clean your throttle body. Throttle body problems are common and can often be solved for free with a little know-how.
    If your throttle body is giving you trouble, then this video is for you! We're going to teach you the best way to clean your throttle body and solve the problem for free. By the end of this video, you'll know how to clean your throttle body and keep your engine running smooth and idle!
    In this video, we're going to show you a quick and easy way to clean your throttle body. Throttle body cleaning is a common maintenance task that can help improve your car's idle quality and performance.
    Don't spend hundreds of dollars on throttle body cleaning services when you can do it yourself for free! In this video, we'll teach you how to clean your throttle body in just a few minutes using simple and easy steps. So watch and learn, and start enjoying improved idle quality and performance in your car today!
    #cleaningathrottle #throttlebody #morempgs
    Music by:
    West Coast Trip by Gunnar Olsen
    Volcano Trap
    Show your Love by Otis McDonald
    Park Bench by Gunnar Olsen
    Not for nothing by Otis McDonald
    Move out by MK2
  • Jak na to + styl

Komentáře • 795

  • @oxmanagain
    @oxmanagain  Před 5 lety +20

    Heres a link to throttle body and injector cleaners so it will save you from buying a new throttle body. amzn.to/2u2drou

    • @joeybananas347
      @joeybananas347 Před 4 lety +2

      There is this guy on CZcams cleaning the throttle body with the car running and spray directly into the throttle body there is a little hole just before the throttle body opening so he could stick that red tip in it and just spray while the car is running and spray through the intake and he says it cleans the valves

    • @mouralessable
      @mouralessable Před 4 lety

      Thank you

    • @mouralessable
      @mouralessable Před 4 lety

      L320 rrs o2 sensor replacement vids?

    • @mattsalazar9402
      @mattsalazar9402 Před rokem

      Will cleaning wipe away the check engine light? Thanks for the help!

    • @oxmanagain
      @oxmanagain  Před rokem

      @@mattsalazar9402 it all depends on what code popped up on your dash. This has turned off my light before and poured in injection cleaners has turned it off before. Just depends on what is causing your check engine light. But this is pretty much free and easy. Thanks for watching.

  • @mouralessable
    @mouralessable Před 4 lety +2

    '06 rrs. Opened back end and saw hardened carbon ring around the inside of the tube where the plate sits. After cleaning, no more idle fluctuations. Your instructions are wonderful. Thanks.

  • @zacatecatl
    @zacatecatl Před 3 lety +6

    Thanks, had check engine and red lightning light on in my 2014 dodge avenger. Couldn't get above 2k rpm and was worried, few bucks and 30mins of my time and it's working right again! Beats paying $500+ at a repair shop!

  • @victorlaurainlove6108
    @victorlaurainlove6108 Před 3 lety +3

    100% better than other videos that I have seen on cleaning throttle bodies ... Great job ... 👏👍

  • @lorettaranieri7442
    @lorettaranieri7442 Před 4 lety +16

    The music wasn't too bad, but a little distracting. Plus there were birds, which I liked.

  • @paulkolazinski1386
    @paulkolazinski1386 Před 4 lety +6

    I watched a couple videos how to do this, then cleaned mine yesterday. today your video popped up and I gave it a look. I wish I saw your video before I cleaned mine. no one ever mentions the intake manifold. great video from someone who just cleaned their throttle body.

    • @LH81633
      @LH81633 Před 4 lety +1

      Paul Kolazinski just make sure that you change your pcv to prevent blow by and keep air filter in great shape, use lots of good fuel injector cleaner to prevent clogged injector wich will fualt out your plugs creating smog/carbon build up again!!!

  • @frankm2538
    @frankm2538 Před 4 lety

    I have a 91 Chrysler LeBaron with a 3.0L Mitsubishi engine. The Idle air control module is bad, so I ordered a replacement. The car is in good shape but has a lot of miles on it so I decided to do the whole job and clean everything. Your video is aces! Since my throttle body is mechanical, I'll remove it like you did to clean it. I suspect when I'm finished the car will idle and accelerate a whole lot better. Thank you for your help. It is most appreciated. Stay well in this terrible virus situation.

  • @b.walker930
    @b.walker930 Před 5 lety +1

    Great video. I have to completely clean my throttle body on a 1995 Lincoln Town Car that has 175,000 miles. This is exactly the help I needed. Thanks!

  • @kennethconnors7532
    @kennethconnors7532 Před 5 lety +1

    I like the way you do these , thorough and complete , nice work

  • @wolfwinfrey9442
    @wolfwinfrey9442 Před 3 lety +8

    great video, you explain it very well. With all due respect I would like to add: be sure to cover the intake hole after you remove the throttle body, if you drop anything down into the engine, ie screw driver, nut, bolt, etc. you will have to get a knew engine or take your engine totally apart to retrieve said item. Again, great video, well done.

  • @rl27rl
    @rl27rl Před 2 lety +1

    So glad I saw this before spending $200 on a new part! Thank you!

  • @LH81633
    @LH81633 Před 4 lety +1

    Great video! I like preventing! Rather then masking!! Air filter, plugs!!! And lots of fuel injector cleaner to prevent clogged injector! Those three if bad equal carbon build all over! I use Lucas fuel injector cleaner and laquar thinner to keep things clean!

  • @rabaham
    @rabaham Před 7 lety +38

    My jaguar was running and idling really bad. Cleaning the throttle body fixed the problem. Thank you.

    • @oxmanagain
      @oxmanagain  Před 7 lety +3

      Akram Rabah you're welcome and thanks for watching.

  • @jamiewhalen9393
    @jamiewhalen9393 Před 6 lety

    Thanks for the tips. Watched the video, cleaned the tb and now there's no more hesitation. Smooth as silk.

    • @oxmanagain
      @oxmanagain  Před 6 lety

      I'm glad I could help and give yourself a pat on the back because you just saved about a $100. Thanks for watching.

  • @doris9314
    @doris9314 Před 3 lety +1

    You gave me EXACTLY WHAT I NEEDED TO KNOW??? YOU ARE WONDERFUL!! THANK YOU!!!!

  • @chaplainneiltaylor2044
    @chaplainneiltaylor2044 Před 4 lety +1

    Excellent video and instruction. Thanks bro. Did this before putting on a CAI!

  • @ebrahimgriffiths7622
    @ebrahimgriffiths7622 Před 9 měsíci

    Thank you a million for your tuition it helped a lot I've been through different mechanic all 4 of them didn't quite exactly solve the problem in my Audie each one of em they made me buy unnecessary car parts for no reason whatsoever but since I've tried your methods there's a huge change on my car✅👍

  • @harmagician1
    @harmagician1 Před 4 lety

    Good thing you removed the TB off the second vehicle. Worth the effort. Thanks for posting this video!

  • @user-ju3od5gy5q
    @user-ju3od5gy5q Před 5 lety +5

    Helpful video. Good explanation, visuals, lighting, etc (background music messing with my hearing and listening to you though). Very well done and helpful. Thanks.

  • @brianmullins5824
    @brianmullins5824 Před rokem

    I know I'm 6 years too late,but what a great video,you are very good at explaining things,top work man 👍👍.

  • @jimmyb1559
    @jimmyb1559 Před 4 lety +6

    Thanks for the video. My suv has an electronic throttle body and I didn’t realize there was a difference. Also I’m glad you’re wearing gloves and a mask. You don’t want to breath the fumes and the cleaner can be absorbed through the skin. I worked in a shop for many years and a lot of techs just don’t want to take the time. Thanks again!

    • @oxmanagain
      @oxmanagain  Před 4 lety +1

      Thanks for your comment and thanks for watching.

    • @panderson4283
      @panderson4283 Před rokem +1

      agreed, though in all fairness, a surgical mask does nothing for aerosol/fumes and vapours (or viruses for that matter). You would need to wear a respirator to block such fumes. It does help with larger particles , dust , etc. Great video!

  • @garychen483
    @garychen483 Před 3 lety

    This is the video that really helped me learn about cleaning throttle body. Thanks !!

  • @angelalaster8097
    @angelalaster8097 Před 2 měsíci +1

    Thanks for sharing. I have the lighting bolt on my 2017 Jeep Patriot. I hate that there are so many place around Chattanooga, TN that rips off women when we take our car in to get fix. I am depress cause there is no tell what kind of quote I will get to fix my problem . After watching this video, it seems rather simple. I just do not have the confident to do it myself. Wish I was married to a mechanic.

  • @Mrs.WhiteLady
    @Mrs.WhiteLady Před 3 lety +12

    Great video! I tried cleaning the throtle body yesterday and gave up because I opened up the wrong side ( air filter housing side) it didn't look like a throtle body was in there plus it was getting dark outside. Before taking my car to the dealership I came across your video and now I'm more confident about doing the job myself. You saved me hundreds!!! Thank you!!

    • @oxmanagain
      @oxmanagain  Před 3 lety +2

      You're welcome thanks for watching and I'm very impressed that you tackle this yourself.

  • @depleteduraniumcowboy3516

    I'm researching how to clean my throttle body right. I appreciate the detail you went into. I'll try not to go crazy with the cleaner and thanks to you I'll make sure I clean the edge, which I haven't heard explicitly on other videos. I am thinking maybe I should take it off after watching the second throttle body cleaning. I'll need to do a bit more research about my exact vehicle to see what all might be involved with that.

  • @jorgenvonstrangle000
    @jorgenvonstrangle000 Před 3 lety +2

    Good thing I learned to do maintenance on my first car besides oil and filters. While changing my oil sometimes I'll check the throttle body while it drains and do a quick cleaning if needed with shop towels from autozone and the cleaner is awesome, some shop while they did my AC i asked them how much and service was like $120 lmao, I saved more money doing work myself that I can do thank god.

  • @racingguitars
    @racingguitars Před 3 lety

    Great video... I'm getting a can of CRC and cleaning my 3 vehicles throttle bodies... thank you for the awesome video.

  • @musicfan1935
    @musicfan1935 Před 3 lety

    I like your statement & your DIY attitude. Glowing Cleaning!!! Happy New Year.

  • @gilliondowner4565
    @gilliondowner4565 Před 8 lety +11

    Thanks for the video. I own an 06 sts with the northstar engine and I appreciate all the vids pertaining to your cadillac. Very helpful.

    • @oxmanagain
      @oxmanagain  Před 8 lety

      hey no problem and thanks for watching by the way nice car haha

    • @historyhunter5215
      @historyhunter5215 Před 6 lety +2

      Gillion Downer northstar sucks balls yo

    • @Chickenassable
      @Chickenassable Před 5 lety

      Any head gaskets blown yet with that Northstar?

  • @leejames8842
    @leejames8842 Před 4 lety +7

    Man you saved me from taking this car to the dealer my c5, I did exactly what you said do and it worked,you saved me time and MONEY (Thank you)

    • @oxmanagain
      @oxmanagain  Před 4 lety

      I'm glad to help out a fellow Cadillac owner. Thanks for letting me know.

    • @MichaelLee-nt9dp
      @MichaelLee-nt9dp Před 3 lety

      Got a check engine light? Want to learn how to check it out yourself? Watch this to learn how to use a scan tool!
      www.youtube.com/watch?v=pN4Kn...

  • @takeniteasyfriend
    @takeniteasyfriend Před rokem

    Great details. Very nice. Now to figure out the throttle relearn process without a bi directional code reader. Thanks again!

  • @mr.jackie6052
    @mr.jackie6052 Před 6 lety

    Great job and details on the cleaning of the throttle body. I gotta clean or replace mine on an 2005 Chevrolet Uplander, never have messed with these electronic engines much but thanks to you and the video i think i can handle this job.

    • @oxmanagain
      @oxmanagain  Před 6 lety

      You're welcome and thanks for watching.

  • @exnjute
    @exnjute Před 4 lety +1

    You ARE the man.....Great video, great explanation, great hi-res pics. I will do this and MAF cleaning on my 2004 Ford F-150, 4-1L to try to get rid of my check engine light so I can pass inspection. Thanks again. Be well.

    • @oxmanagain
      @oxmanagain  Před 4 lety

      Thanks and I appreciate your comment. Have a good day.

  • @bilboman1
    @bilboman1 Před měsícem

    Really well made video, you explained everything well and you could see everything you were doing. That must have took some time to put together. Very much appreciated! Great job! Thank you!

  • @plugger4945
    @plugger4945 Před 4 lety +1

    Great vidio,no B.S.,just the straight dope! Thank you for your effort.

  • @bigsparky8888
    @bigsparky8888 Před 4 lety +14

    Good Job Brother!!! I did it to a 91 Sentra w a GA16DE AND WOWEEEE 180,000 miles...it ran like NEW!!! But the guy I got it from had put the cheapest A-zone wires on it...I am still amazed it ran good enough to pass smugg...after I got the correct 7mm Wires on it...ohhhh man...night n day...now it runs...heehee... awsome...

  • @sjohnson1776
    @sjohnson1776 Před 6 lety

    Excellent info man! Thanks. I picked up a can of cleaner at noon today. Will use it this weekend.

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Thank you for watching and let me know how it goes.

  • @soumayanaoui8502
    @soumayanaoui8502 Před 4 lety +2

    thanks dear very nice video despite the music greetings from your followers in Kuwait

  • @PAClassic95
    @PAClassic95 Před 4 lety

    When I'm already enjoying the video and than at 7:17 I see the ole "Vortec" and like it that much more because the vehicle I'm researching this for is a '95 Chevy Pickup! 😎 Great Video! 👍🤟

  • @mpahl007
    @mpahl007 Před 5 lety

    Had surging problems with my car in cruise-control or normal driving particularly in the cold. Took it to two Dealers who service my make of car and they said they didn't know what the problem was other then to clean the injectors. Did the old youtube check and came across this, I did the clean and the car ran heaps better. Then I saw the Mass Air Flow sensor clean and cleaned that also and the car is running perfectly. Goes to show not all people who work at Dealers know their cars, and obviously saved myself a heap of dollars.

  • @patrickknight230
    @patrickknight230 Před 4 lety +1

    Great job explaining this! Thanks!

  • @Tom-wq2mz
    @Tom-wq2mz Před 5 lety +2

    That (Lip) up in there is a Butterfly to us oldschool machines a Blade to the new school computer button pushes. Good video and the removal cleaning will work wonders CRC throttle body and Mass Air Flow sensor cleaner is my choice.

  • @ross5506
    @ross5506 Před 4 lety

    Just a tip, using ACF-50 on your electrical sensors, does wonders for protection. They only use that product on airline jets, most likely the military also.

  • @tkking188
    @tkking188 Před 5 lety

    Very good video...I watched a few others that really didn't show or tell what you did...Thanks 👍👍

  • @nigelnazeemjohannes85
    @nigelnazeemjohannes85 Před 4 lety

    We got a Ford Figo 2011,and the light comes on at times,so I'll be following your instructions and will give feedback..

  • @johnnycook2384
    @johnnycook2384 Před 3 lety

    Thanks for the video. You’re a great instructor.

  • @congettoinzauro4860
    @congettoinzauro4860 Před 2 lety

    Thanks for the illustration, great job.

  • @chrisricotta7063
    @chrisricotta7063 Před 3 lety

    I'm doing this to my car on the weekend and this video was a great help 👍👍

    • @oxmanagain
      @oxmanagain  Před 3 lety +1

      Let me know the outcome. Thanks for watching. You have a nice day.

  • @elrobo3568
    @elrobo3568 Před 3 lety +3

    I would like to expand on what you said about "you can snap your finger" if you leave the throttle body pugged into the vehicle, it could energize in "ice break mode" if it does this it will close driven by the reduction gears and it could cut your finger severely. Your video is spot on, I just want others to know the danger for leaving it in circuit. Thanks!

    • @oxmanagain
      @oxmanagain  Před 3 lety

      I thank you for adding your comment.

  • @ranahamayun9919
    @ranahamayun9919 Před 3 lety +1

    You doing very good job 👍👍👍👍
    Very nice video 👌👌👌👌👌
    Very good teaching very good Teacher
    Thank you so much for Teaching

  • @goldwolf0606
    @goldwolf0606 Před 4 lety

    Glad you ended up cleaning the edge of the valves. If you don’t the carbon build up won’t allow the valve to close fully and then that negatively affects the computers calculations for a smooth ride.

  • @latinoazul4810
    @latinoazul4810 Před 7 lety

    one of the best videos I seen thanks! I have a cadillac 2004 cts and my car for some reason didn't acellarate at all my throttle cost 220$ I clean the outside and it works but I will clean the inside to get better performance

    • @oxmanagain
      @oxmanagain  Před 7 lety

      Thanks for watching, I appreciate the nice comment. I'm glad the video helped. Thanks again

  • @joedorotik9159
    @joedorotik9159 Před rokem

    Very good video young man Thank You Joe

  • @tomitomtom
    @tomitomtom Před 7 lety

    Man, You are my hero! Many MANY thanks for your advice.... You just save my day! Hello from Montreal Canada! Have a nice one Brother!

    • @oxmanagain
      @oxmanagain  Před 7 lety

      tomitomtom You're welcome and I'm glad the video helped you and your dad out. Thanks for watching.

  • @user-nf3ys9vg3k
    @user-nf3ys9vg3k Před 3 lety

    Great video! I liked that you show both styles! Thanks for sharing, subbed.

  • @laragreene8328
    @laragreene8328 Před 3 lety

    Great video,so easy to understand!! 👍 ...and I was so busy listening to you I didnt even notice any music!! I'm amazed some complained!

  • @danhickman152
    @danhickman152 Před 6 lety

    Great video. Thanks for the tips. I'm going to try this on my truck today!

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Thanks for watching and let me know the results.

  • @MichaelPertschi
    @MichaelPertschi Před 4 lety +1

    Great Video keep up the good work. The only thing I would have done different is pull that red rubber seal out before spraying the cleaner just in case.

  • @mallguineablue
    @mallguineablue Před 3 měsíci

    Very easy to understand video! Thank you for sharing this info!

  • @screwsnutsandbolts
    @screwsnutsandbolts Před 5 lety

    Great videos 👍🏻

  • @AMASON_AVIATION
    @AMASON_AVIATION Před 5 lety

    Awesome video. Great information. Thank you for sharing.

  • @wst8340
    @wst8340 Před 2 lety

    On my Dodge Journey you have to recalibrate the TB using a scan tool.
    Excellent video,👍👍👍🇨🇦

  • @ruthdanielson919
    @ruthdanielson919 Před rokem

    Great demonstration and explanation..

  • @freakothesideshow
    @freakothesideshow Před 4 lety

    Thanks for the tips and examples bro!

  • @sharifsircar
    @sharifsircar Před 6 lety

    This has ton of info, thanks for making a detailed video to such an extent

    • @oxmanagain
      @oxmanagain  Před 6 lety +1

      You're welcome, and I appreciate you for watching.

  • @kevinblair191
    @kevinblair191 Před 3 lety

    Good video man! Very thorough!

  • @franciscoavendano6975
    @franciscoavendano6975 Před 4 lety

    Great detail really informative!!!!

  • @Mega07
    @Mega07 Před 3 lety

    Fixed my hard starting issue thanks

  • @simonkhan683
    @simonkhan683 Před rokem

    Thanks for posting.

  • @tresmum
    @tresmum Před 5 lety +1

    Thank You Kind Sir for making this video. Very helpful, I have a v70 2001 volvo wagon

    • @oxmanagain
      @oxmanagain  Před 5 lety +2

      You're welcome and thanks for watching.

  • @supertorton3134
    @supertorton3134 Před 3 lety

    Thaks bro, thats help me in my LR3. Blessings

  • @spiffy72985
    @spiffy72985 Před 5 lety +13

    Thanks, young Kareem Abdul-Jabbar! :D

    • @oxmanagain
      @oxmanagain  Před 5 lety +3

      Haha that is a first. Thanks for watching.

  • @davidweum9334
    @davidweum9334 Před 4 lety +1

    Great video/instruction.

  • @richr5971
    @richr5971 Před rokem

    Great video. Thanks

  • @SupportYourLocalPolice

    Thank you so much. Yesterday Firestone told me it will cost $511.21 to replace mine!

    • @oxmanagain
      @oxmanagain  Před 4 lety

      I'm glad I was able to save you a little bit of money.

  • @ar15gator
    @ar15gator Před 3 lety

    Real Nice job! Thank you for sharing

  • @rsanchez7111
    @rsanchez7111 Před 5 lety +2

    Nice vid amigo. Thx for sharing.

  • @toddbarlow3094
    @toddbarlow3094 Před 6 lety

    Good job man, I'm gonna do mine today. Thanks

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Todd Barlow You're welcome, thanks for watching.

  • @robinhockett1191
    @robinhockett1191 Před rokem

    Thank you for taking me back too school

  • @joeferguson2606
    @joeferguson2606 Před 4 lety +1

    excellent work

  • @normynorm260
    @normynorm260 Před 5 měsíci

    Great video! Keep it going.

  • @sunilayya8948
    @sunilayya8948 Před 4 lety

    Useful clip. Thank you

  • @BabyDillBill
    @BabyDillBill Před 16 hodinami

    Love the music and think the levels are fine

  • @rogerlarson8040
    @rogerlarson8040 Před 4 lety

    great video. Thumbs up for sure. Thanks for posting.

  • @rogerfoxley984
    @rogerfoxley984 Před 5 lety

    Well presented thanks.

  • @dgomez409
    @dgomez409 Před 4 lety

    Thank you. Great video

  • @vianaautocenter258
    @vianaautocenter258 Před 5 lety +1

    Thanks for the video is very helpful!

  • @cooperbrown1
    @cooperbrown1 Před 3 lety

    Thanks, will help for sure.

    • @oxmanagain
      @oxmanagain  Před 3 lety

      I'm glad the video help you and thanks for watching.

  • @tombstone2826
    @tombstone2826 Před 3 lety

    Great Video !

  • @paulharte8325
    @paulharte8325 Před 5 lety

    My Jag running crap at low speed, spent loads already so no harm in trying to do this myself....thanks for the vid

    • @mikejames1860
      @mikejames1860 Před 5 lety

      U anywhere near VA? Happy to look at it for ya free of charge

  • @jnorb8633
    @jnorb8633 Před 4 lety

    Very good video. Thank you.

  • @stevenlaubach7222
    @stevenlaubach7222 Před 4 lety

    Thanks for the video great job!!

  • @robertaustin1945
    @robertaustin1945 Před rokem

    Great video

  • @mikepadgett8074
    @mikepadgett8074 Před 7 lety

    Great video. Thanks for posting!

    • @oxmanagain
      @oxmanagain  Před 7 lety

      You're welcome, thanks for watching.

  • @roydineen848
    @roydineen848 Před 7 lety

    thanks for sharing...i will check my throttle body out first thing

  • @InCountry6970
    @InCountry6970 Před 6 lety

    Damn good job and easy procedural video.
    Thanks

  • @roydineen848
    @roydineen848 Před 7 lety +1

    thanks for the tips....im going to try this on my ford ranger....thanks again...this is well worth watching....

    • @oxmanagain
      @oxmanagain  Před 7 lety +1

      I appreciate your time and enjoy working on your truck, it's very rewarding to do stuff on your own.

    • @tkking188
      @tkking188 Před 5 lety

      Roy Dineen...Yes I did it for my Ranger and it solved all crazy idling problems I was having...👍

  • @-MrRichBiker1967
    @-MrRichBiker1967 Před 4 lety

    great video, my man!

  • @coalmahn891
    @coalmahn891 Před 7 lety

    Thank You! Great & thorough video!

  • @charlesdowns1691
    @charlesdowns1691 Před 2 lety

    good detail job bro brp