Don't Clean throttle body before watching this/Cleaning cable controlled or Electrical Throttle body

Throttle Body and Air-Intake Cleaner: amzn.to/2UcEXAF
In todays video i will show how to clean throttle body weather if its cable controlled or electrical
so Don't Clean throttle body before watching this, there are some things you should know before cleaning that way you don't damage your car and cost you more for repairing
Steps for gunk Cleaning cable controlled or Electrical Throttle body
---So for cleaning cable Controlled Throttle body, after i removed throttle body hose and spray CRC throttle cleaner with plate closed and then open the plate and spray the cleaner again, then wipe it with paper towel
after 5 minutes put the throttle hose back
--So for cleaning Electrical Throttle body, after removing throttle body hose, spray CRC throttle cleaner with plate closed and then put the key on (ON) position, ask someone to hold the gas paddle and spray the cleaner again, then wipe it with paper towel
release the gas paddle
after 5 minutes put the throttle hose back
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon EOS M50 Mirrorless: amzn.to/35BdSsU
DJI Ronin-SC - Camera Stabilizer: amzn.to/3wINHwm
Andoer 3-Wheels Wireless Remote Control Motorized Camera: amzn.to/3vDuf2D
Gopro Max 360: amzn.to/345NNTf
For contact
email address: [e-mail]
Facebook account : ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

[@TilakRajVerma]

To the point, no fishy glamour, no waste of time, simple and excellent information 🎉👍

[@AliMECH]

I appreciate that!

[@ahmedghaznavi]

This method is good when throttle body is slightly dirty. But if it’s too dirty better to open it and then clean from inner side too. Secondly never spray directly inside the throttle body when it’s attached all the dirt goes into intake. Better to apply spray on clean cloth and then clean it. That’s how i clean electric throttle of my cars.

[@frozenking9394]

Thks I Wuz wonder that

[@scottykilmer3920]

Exactly if you know the engine is crapp it doesnt matter, but if you care about the health of your engine dont do it this way.

[@RealLifeFinance]

I thought dame if bad dirty spray rag vs spraying gunk into system

[@parchestiritas2430]

Interesting what you said

[@caymanefoil]

100%

[@auntbarbara5576]

You dont waste a minute of anyones time. Every video should be like this.

[@AliMECH]

Thanks, i like to give more information is a short time, become when ppl having a problem, they should see the solution immediately

[@jenarorosado460]

But also remember, experience makes the difference

[@babarbka0005]

😂

[@mackmorris138]

This is wrong way too do it

[@tonyreyes9969]

@@mackmorris138 how to do it correctly then, please explain, thanks.

[@jesusavila629]

If you came to the comments for the reviews , this a 100 stars review , no time wasted and both ways shown thanks

[@martialarts151]

Best throttle body cleaning video on YT. Only one I found describing how to safely and properly clean the electronic TB and neat tip with torque wrench.

[@Coldwallbar]

Thank you. Every LS400 Owner needs this lol

[@dohc1067]

I have a 2010 WV beetle with a 2.5 automatic. I noticed recently more hesitation while shifting. I followed your technique of using in my case a piece of wood to keep the throttle plate open. Its interesting how clean it looked from the outside, but after the seafoam spray it was like black ⚫️ tar coming from it. I felt resistance against the motor (buzzing noice) once I bumped the throttle plate. I was able to lightly brush the plate. After about 10 minutes of cleaning, i started the car up. Quicker starting, quieter idling, and consistently better shifting. Thats just from driving down my street. Thank you sir for your help. Eveything i needed was already home for some time so basically it was free maintenance.

[@lancewhite4807]

My dealership charges $89 for this service so watched this video and did it for a few pennies that the clear costs.

[@AliMECH]

Awesome, glad that my video saved you money

[@wolfsden3812]

Mine wanted 159.00

[@843idfa]

Yes it's worth that much if they're going to remove it and clean it properly, not just spray stuff into it.

[@jamaalblack9076]

Plus there’s more involved than just spraying in the throttle body it’s a 3 part kit that includes something like sea forming

[@daviddowns7552]

thank you for the good details on this. can you please tell me if ( super tech spray from walmart is ok for this? it says throttle body clean + it was the only type they had? ) thank you very much. )

[@loreadaauto]

Thanks for sharing your video on cleaning throttle bodies. As a throttle body manufacturer, we appreciate your thorough steps for both cable-controlled and electronic throttle bodies. It's important to properly clean your throttle body to avoid damage to your car and expensive repairs. We'll be sure to recommend your video to our customers for proper maintenance.👍

[@AliMECH]

Thanks, glad it was helpful and easy for understanding

[@tee3294]

A friend cleaned my throttle bottle with thinners, my car has been revving and consuming so much fuel itself since then. I’m struggling to get a spare throttle bottle for Chevrolet

[@InexplicableBill]

@@tee3294 Your friend may have sprayed way too much into the throttle body that it seeped into the electronic control panel on the side of it, causing damage. Very little cleaner is needed.

[@seanmcasey8376]

Excellent! Great camera work and step-by-step instructions. Thank you!

[@AliMECH]

Thanks for watching

[@gregroth4696]

@@AliMECH Take the throttle body off to clean! C’mon man.

[@thomasbrogan9102]

Exactly

[@achmada9338]

Made sense, to the point,into target. Thank bro

[@AliMECH]

You are welcome, dont like to waste time 🙏🏻🙏🏻

[@achmada9338]

@@AliMECH true, keep up bro.

[@edsalvador5939]

I like videos like this because I learned more here then at my work shop

[@AliMECH]

Thanks for letting me know, glad it was helpful

[@Luigi13]

Good points! Today I cleaned my electrical throttle body with Gumout cleaner, my ignition is a push start and I don't have the option to leave it open the way you did with the long rod. Yes I did get the engine light, but after cleaning and spraying into the throttle body little at the time while revving the engine afterwards the Kia Niro accelerated like a champ, I almost could not feel it and small hills became easier to climb and I could feel the air going through very well with a roar. I also did have a 16OZ B12 Chemtrol cleaner for the fuel. Now I will be clearing the engine light soon.

[@sumanravichandran9107]

What codes did you get on the check engine light? I have 2018 Camry and my throttle body is not opening on key accessory position. is there any other way or should I move it by hand?

[@Luigi13]

@@sumanravichandran9107 The only way to open the throttle is by using a clean piece of wood or a hard plastic material to avoid scratching it . It is like a spring it will open and then spray the chemical a little at a time inbetween each spray when I rev the engine I close it by not touching it it goes back the way it is when you first start. And then rev it a little bit and spray gently again and again each time revving the engine at 2K RPM not to eceed 3K rpm. This was my experience towards the end I sprayed an 1/8 of a can and let it sit with the engine off, for about 45 minutes and took it for a drive. Drove for about 10-12 miles and it run beautifully? I have about 31.5K miles on my Kia Niro.

[@dahaze140]

Excellent work very well! Car is running smoooooth! 2012 Forester with electric throttle.

[@AliMECH]

Great to hear!

[@stephenhaval6769]

Kaka Ali your chanel is one of the most useful Kurdish Channels on the Web, thank you for all these informative videos you share with us.

[@AliMECH]

Glad to hear that, and appreciate your support brother

[@1995dresser]

Had my throttle body off when I replaced the coolant bypass hose on my 2005 Tacoma and cleaned it I moved the throttle plate by hand very slowly and cleaned it no damage what so ever and that was 2 years ago still running great

[@royquesada5295]

Most damage comes from cleaning throttle body while still connected electrically.

[@1995dresser]

@@royquesada5295 Yep

[@frozenking9394]

Thks 😮

[@Zeek800]

You are right. Open the electronically activated throttle plate very slowly and gently. Don’t force anything. Spray the microfibre cloth not inside the throttle body and use one finger to carefully wipe.

[@j.f.a5041]

Muito bom!🥇

[@stephenharvey5289]

Thank you for doing electrical throttle body. I was thinking o would have to remove throttle body.

[@baikalkim5324]

Thank you for your useful tips!

[@AliMECH]

You are welcome, thanks for watching

[@RMalai]

Wow! Fantastic video. Thank you.

[@AliMECH]

Appreciate that

[@spod2998]

Good video. Make sure to clean the Idle Air Control (IAC) valve while you’re in there. Same steps as shown but you’ll need brushes to scrub the housing, valve pintle, and spring.

[@mickoespanillo6735]

Thank you so much. Direct to the point. :).

[@AliMECH]

Thanks for watching

[@thomasbrogan9102]

Thanks.
Well done, bruh.

[@tomjones2348]

Bravo! Quick and to the point!

[@AliMECH]

Thanks

[@erwinmelgar9575]

I always remove the throttle when cleaning them. Maybe this is short cut but i want it cleaned well on thw other side too and not riak of having the dirt and grime going to the intake manifold.

[@843idfa]

Exactly, those cheap youtube videos try to lure people into clicking liking and subscribing with cheap advice, and don't care what happens to people's cars. I had a ton of grime come out when I removed and cleaned mine.

[@GametimeSlime]

Than you get check engine lights if you don’t relearn it

[@oujiaboard3119]

"No need to use too much of the cleaner." LOL love this video!

[@AliMECH]

lol if you clean something always use more hahah, thanks

[@truenexus1usa]

Good work. I like this video. It's quick and to the point. Good advice on the proper spray TB cleaner only. I think I can do this myself. My Autozone has the CRC brand cleaner. I will also clean the MAF Sensor with only CRC MAF Sensor spray cleaner.

[@AliMECH]

Glad it was helpful!

[@BenDieseL313]

Very informative.
Thank you !🙂

[@AliMECH]

Glad it was helpful!

[@charlesakaolisa20]

Great video, you went straight to the point. Thanks a lot bro

[@AliMECH]

Thanks for watching

[@davidfrank2824]

Also when you are done your car might be a little hard to start and when it does you might see smoke from your exhaust. It goes away pretty quickly depending on how much cleaner that you had used. I can only speak on the ones with the cable. If you have one that is really filthy it is better to remove it to give it a good cleaning. Old toothbrushes really make short work out of cleaning one and you can use a toothbrush even with the throttle body on the engine.
Great source of information I must definitely hit the like and subscribe. Look forward to watching another one of your videos.

[@brazyuniverse4221]

If using a toothbrush and some carbon falls in, is that okay?

[@unebonnevie]

Excellent throttle body cleaning video!

[@AliMECH]

Glad you liked it!

[@morningglory102]

Now that is a smart way to clean the throttle body. I've seen people doing it other ways and then have to relearn the throttle idle control. This was EXTREMELY informative.

[@unnainconnu9098]

Depending on the car, it may be easy to relearn it, like turning on the ignition, waiting 60s and turning it off. If it is, that's easier than using something to keep the pedal down and avoiding any contact with the throttle.

[@brazyuniverse4221]

For a Toyota, the idle relearn procedure is super easy

[@codyprice0295]

The reason you relearn the body idle air control is because you removed the smut from the throttle body that is causing the plate to have to open more to run. Not because you manipulate the plate.

[@toddh6234]

@@codyprice0295 There is a position sensor in those electronic versions. Manually moving them throws them out of sync or damages them.

[@codyprice0295]

@@toddh6234 on what kind of vehicle? That’s a very generic statement

[@roadtripper5553]

Thank you your advice is good

[@coolceecoolcee3958]

Great video brotha! Thanks so much!!!

[@AliMECH]

No problem 👍

[@MrTitaocasio]

A well taught video thanks I'm a female and I am going to try it now!

[@AliMECH]

Thanks for watching

[@organikpnw]

What does being female have to do with it?

[@shakali3665]

Well done wonderful

[@melraine919]

Good demo and info thank you… from England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@AliMECH]

Thanks for watching

[@melraine919]

@@AliMECH You’re welcome 👍🏼 🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@zanuarrosyidi4034]

Thank you for sharing this

[@AliMECH]

You welcome 🙏🏻

[@eMotoAZ]

Great video thank you so much 🇺🇸

[@AliMECH]

Glad you enjoyed it

[@4yp6aH8]

Thanks,properly made video!

[@AliMECH]

Glad you liked it!

[@tareq7922]

Great job bro 👏

[@AliMECH]

Thanks for watching

[@lalolalo1233]

straight to the point vid. I've 07 crv and noticed when engine is idle and I press the gas pedal there's a second delay before it revs not sure what the issue is, or is it normal. Any ideas?

[@letsgobrandon8661]

Go to any Chevy parts dealer they sell stuff called top engine cleaner, it’s the best hands down. A couple drops of this on a microfiber rag and your throttle body and butterfly are golden. Also clean the IAC Valve and MAF Sensor while you are at it using Sensor Cleaner.

[@1995dresser]

Seen some CZcams videos using Sea foam and a toothbrush with Great results the Sea foam won't hurt the coated bushings on the throttle shaft

[@juliustay2541]

Thanks for great video.
How do you reprogram electronic throttle body?

[@kato2182]

just let it idle for a few minutes or driving on the freeway from 40 mph raise and drop speed or cycle the key in the ignition a few times each car is different for me i just had to idle it for a few minutes

[@ghaithsabah8885]

Very nice thank you for the valuable information, greetings to you

[@AliMECH]

Glad it was helpful!

[@edlopez5k]

Genius!!!!

[@somethingforeveryone4206]

Straight up dont be putting your fingers in an ETB. Some have ice breaking cycles amd they WILL sever your fingers.

[@richroc7]

Excellent video thank you 🙏

[@AliMECH]

You are very welcome

[@EricJones1969]

A little add up:
-if you won't let it to dry, car may be hard to start for the first time because of fumes of cleaner left in the intake
-if you have modern throttle position sensor it may need some time for ECU to readjust after cleaning. So it will be good if you replace ECU fuse before start cleaning and put it back after you reassemble all the parts.

[@Nytellem]

Never heard anyone mention this other than removing the neg to battery. Does that work as well?

[@vakhtangjokhadze2427]

@@Nytellem Might help but then you won't be able to use gas pedal for opening the throttle body right?

[@jamesj.litteriojr.433]

@@Nytellem Yes it does. I remove ECM1 and ECM2 fuses after I'm done for about 1 minute and then put them back in. I do this every time I modify my intake system...Now I got it just where I want it. So even when you are doing an intake system, throttle body spacer, exhaust, etc. It is always a good idea to reset the computer system this way. Plus it's easier than removing the battery terminal. Hope this helps.

[@premiumc2282]

@@jamesj.litteriojr.433 where is this located in a Honda Accord 2011? Is it easy to disconnect and reconnect

[@jamesj.litteriojr.433]

@@premiumc2282 I would look in the owners manual for fuses or fuse box at the back of the book. Once you locate it, then you can see how the layout is setup on your car and pick the ECM or ECU fuse/fuses. My Scion has 2 ECU fuses so I pulled them both after I cleaned the throttle body and waited one minute then put them back in to reset the computer everything was fine. Hope this helps.

[@ben_jammin242]

Brilliant video 👏

[@AliMECH]

Thanks for watching

[@gracec1665]

Fantastic! Thank you!

[@AliMECH]

You're very welcome!

[@jascam1]

Paper towel leaves lint, use a clean microfiber cloth for better results. Good video

[@HT-dp6tw]

Thank you. Can we do the same way with honda odyssey 2008?

[@jonathanp7184]

Good video! I did it to my car and the engine light turned on and then after driving the car for a few minutes, it turned off by itself.

[@AliMECH]

Thanks, it's OK, maybe you didn't let it dry completely, that's why engine light came on, after driving, it got dry 🙏

[@k_h_nobody]

Great vid, not drawn out, great advice. If you get a chance to try BG throttle body cleaner, LMK how you like it, I definitely prefer it.

[@AliMECH]

Thanks! Will do!

[@ulecha4]

thank you for video

[@jt8084]

Nice video. Keep it going.

[@AliMECH]

Thanks for watching, I will 🙏🏻

[@anuruddhadissanayake4881]

Amazing video!!! Good advice

[@AliMECH]

Thanks

[@AliMECH]

Thanks

[@jamesj.litteriojr.433]

Love This Guy!!!!! Always learn something new!!!!!

[@AliMECH]

Thanks James 🙏

[@gratefuldale117]

The key on/ pedal push method was new to me!
I removed mine fully on 2006 Tundra 4.7 and really carefully did open gently, as well as a few on engine cleanups.
Seems no harm done, just a clean TB!

[@ashleypickle1328]

👏🏼👏🏼 going to my car now.

[@parvezkutub3857]

Thanks sir

[@StillLifeHomocide]

You're so informative and to the point. Subscribed.

[@AliMECH]

Thanks and welcome

[@bonggenese2438]

Thanks bro!!!

[@AliMECH]

Any time

[@denniswaga1159]

Nice video. Thank you. What should be done if carb and choke cleaner were used instead of throttle body and intake cleaner?

[@AliMECH]

No, carb cleaner and choke cleaner most of the times damage it

[@elcabo5712]

Thank you so much

[@AliMECH]

You're most welcome

[@user-xt8xx2qy1g]

Great video thank you

[@AliMECH]

Glad it was helpful!

[@ricardopena2463]

very helpfull thankyou

[@AliMECH]

Thanks

[@z512345]

Excellent!!!

[@AliMECH]

Many thanks!

[@buddyhoover57]

Good video!

[@AliMECH]

Thanks for watching

[@azzamhaq9556]

Hi Ali, I moved the throttle body by hand, I had not seen your video. How do i test it now?

[@traviesocuevas3571]

2008 Nissan Altima 2.5 do I have to reprogram the throttle after cleaning it or remove the Hose?

[@leomysky]

Thank you for the video

[@AliMECH]

No problem

[@mohakberry7966]

Superb video 👍

[@AliMECH]

Many many thanks

[@liquidh5226]

I used carb cleaner instead. Works.

[@animeangel6863]

LOVE IT❤

[@Official-bg1dt]

Useful video 👍👌👌👌

[@AliMECH]

Thanks a lot

[@appwifi7714]

Very good

[@Fayis1341]

Really great video brother. I have LEXUS LS 460 but it’s throttle won’t open even I apply acceleration in ignition mode . Can I open the trottle with my hand a clean inside? Wht about battery negative terminal is it must to remove that ??

[@Fayis1341]

I am seeing my comment after 8 month still no reply 😂

[@delroyjohnson36]

Thanks Bossy Because U Jus Learned Me SumTing New😍😍😍😍

[@AliMECH]

Glad to hear it

[@delroyjohnson36]

@@AliMECH Respect ✊

[@pareshprajapati7916]

Thank you sir
🇮🇳

[@AliMECH]

no problem

[@thewitness2147]

Well made video...

[@AliMECH]

Thanks for watching

[@histatimaniples]

Great video

[@AliMECH]

Glad you enjoyed it

[@ShelDockToyotaVitz]

Nice video.

[@AliMECH]

Thanks

[@MrMaster2262]

If you have an electrical throttle body...
can you just unplug the sensor to open
the butterfly manually rather than
having to press the gas pedal ?

[@bronniesboy]

Honda Accord euro 2009 2.0 R20A3 just cleaned out whilst ignition on position 2 and weight on gas peddle so butterfly is fully open/closed. After clean, disconnect battery for 15 mins, reconnect with all lights and radio off, go to ignition positon 2 for 2 seconds, then start car, run at 3000rpm for 5 mins or until fan kicks in, and throttle position relearn is all done, set ready to go. Idle rock steady and running sweet 👌😙. This teaches ECU the adjusted position of throttle after it has been cleaned

[@paulm2322]

Thank you

[@AliMECH]

🙏

[@neildean7515]

Top video, thank you. Just for clarification, did you turn ignition to first notch or turn on the engine fully?

[@AliMECH]

The key has to be on ignition position

[@Nater389]

You can manually articulate an electric TB plate, just be careful doing so. Do it slowly, and don't force the extreme position on either end. I've never had issues after cleaning my Ram 5.7 Hemi TB like that every time. I actually always remove it for a cleaning because it is easier to work on. It sits right on top of the engine up front so it is easy to remove. 4 bolts and an electrical connector. Never had any problems.

[@daviddowns7552]

thank you for good infomation video.🏁👈

[@AliMECH]

Always welcome

[@josecarlosrodriguez9876]

Thanks man

[@AliMECH]

No problem

[@biggj21]

Good sheet my friend❤😮🎉

[@AliMECH]

✌️✌️😅

[@jesuslopez5494]

Hello 👋 how’s it going I’ll appreciated if you could answer me about this question 🙋‍♂️ when I press the gas pedal my throttle does not open. Is a Hyundai Sonata 2016 2.4 thank you 🙏

[@taylorcepin4698]

NICE!

[@AliMECH]

Thanks!

[@omayaali4157]

hello
do i need idle relearn in this toyota camry which has electric throttle body?

[@zainulabideenzain3]

great video

[@AliMECH]

Thanks!

[@VivaLaRaza619.]

What if u clean it with another spray and not the one u used ? Can cause check engine light u said ?

[@dan_6915]

I was looking for this after ive looked at my throttle body and saw it is difficult to get it out from his position..
I'll not spray inside it tho.
I'll just use a cloth soaked in liquid to wipped it off.
Thanks, mate

[@premiumc2282]

How did that go for you any improvements ?

[@rafaelcirurgiavet]

perfect

[@AliMECH]

Thanks

[@hotwheel6663]

You have to leave key turned on once pedal is pushed down?

[@paveljelinek772]

Well since MAF is BEFORE throttle, do you think that crc carb cleaner spraying directly to the throttle while engine running would help ungunk the valves?