Philips CD473 CD-Player repair
Vložit
- čas přidán 30. 03. 2022
- A old one Philips CD473 CD-Player will be found in the dry cellar. This Player come out in 1988 and the Historic DAC 1541 is build in. Also the CD Mechanism: CDM-2 / CDM-4/11 are build in. Could it be possible to repair it and refresh it to new live. First it looks like that everything is good but that isn't so. Now we writing the year 2022 this is around 33-34 year ago that this Player come out. The Quality is unbelievable in case of the situation that something is defect in this machine but lets have a look what happen. After more then 3 decades this CD-Player is in a unbelievable condition. Please subscribe my channel Best watch weakbit.
My first CD player ❤
Love your hardware experiments! 👍
Very good materiał.very help full.thank you
Tnx for sharing sir
TDA 1541 😍😍😍
Hello, when I bought this device, it had exactly the same problem. After watching your training clip, I first replaced the belt and the 1000 microfarad 35V capacitor. The problem was solved by about 95%, and it only gave errors sometimes, but after replacing the 6800 microfarad capacitor, I replaced it, the device no longer works and only gives error messages, what is the reason?
Hi, can the CD473 board be use for conversion into a Bluetooth DAC. How can it be done? I took out the board and threw away the casing...thinking of toying with it.
Hi I have a CD 473 which has a problem with skipping in higher tracks of the CD. I have cleaned the laser lens with isopropyl and this has helped somewhat. I will order new capacitors for the power supply. How did you adjust laser diode? Is this the potentiometer shown in section D4 of the PCB at
Screwdriver head is called Torx :) and my CD160/CD371/CD480 will read cdr which has the same CDM2/CDM4 mechanism.
Hi Weakbit. I love your video and your cheerful style, thank you!
I have the CD960 from this era. It’s a wonderful machine but the CD tray sticks. I’ve changed the belts but I need to get back inside it to lubricate the rails.
This was my first cd player I bought it in 1986 I used it for about five years then upgraded to merantz
At this year MacIntoch has sell a MCD 7000 with the same mechanic and electronic ! But 20 x more expensive.
Belts and defective motors are common. I also find defective laser pickups but often they aren't available or the cost is too high.
Hi weakbit. Thank you for making and posting this video. Kindly, in your estimation, then, if I understood you correctly, the main issue were the weak/cut belt, and ¿the 'adjustment of the monitor of the laser diode/sensor up closer to the media/CD'? Thank you for making & posting this video. Thank you again.
👍
Ok done, changed the belt, only the belt, had a spare pulley but did not touch it. Order to do it: I suppose Drawer Schnappi could have been left in place: ah no, otherwise front plate can't betaken off. So try to pull out the drawer completely, as you need to free 2mm to place the new belt. you do not touch the motor. Otherwise screw off the 1 screw in the bottom (long screw for this small plastic part), the 2 screws back of transport, 1 screw in front of the transport. I had problems to reattach the spring from the laser cover. Take a photo before manipulation.
Tolles Video! Was glaubst du war der Grund, dass die gebrannte CD zuerst nicht erkannt wurde? Der dreckige Laser oder die alten Elkos?
Hello! I have a Toshiba xr-z70 cd player. I have a question, if you don't mind. My CD player opens the drawer when starting from the power button. What would be the problem? Any advice is welcome. I understood that this is the common problem with these models. Thank you very much. A good day.
Hallo. Ich fang jetzt an den Riemen zu wechseln da die Lade nicht mehr automatisch öffnet und schliesst. Was brauche ich zum reinigen? Balistolöl und 100% Alkohol und Ohrstäbchen. Es wird auch Glasreiniger benutzt um die Linse abzutupfen. Geht Isopropylalkohol, habe noch welchen. Danke.