Extracting a broken oil dipstick.

Sdílet
Vložit
  • čas přidán 20. 08. 2024
  • Ring broke off of the dipstick on my 2010 Town and Country. fished out the o-ring but the bottom half was still stuck inside the tube. poured a small amount of oil in the tube, put a 1/2" socket over the tube, and the ran a screw through the hole in the socket and then in to the plastic. (note I probably should have used a shorter screw). run the screw until you start to pull the plastic up since you just made a mini-gear-puller. once the screw can't pull up anymore, you should be in the oiled section of the tube. It should then be possible to loosely put a wrench around the tub and under to socket and tap the socket up with a hammer from underneath.

Komentáře •