Thanks cured my floppy gear shift stuck in 1st. Used your temp repair with cable ties. If you fix two ties around the actual shift arm either side of the nylon bush and then another two through these and over the top of the bush works perfect almost a permanent repair.
Thanks mate, very helpful for 3 things all in one! without any mental loud music in the background too! I just put 20 quid of petrol in mine (all nozzle handles black at this garage I'd never been to before!!) so needed to see exactly where fuel filter is and how to remove it. Here's hoping a drain out, filter change and fill up with diesel works! Ta
If you have an EOBD reader with live readout (about £25) you can read the MAF g/s output. If it’s 0g/s then the sensor is likely not sending any output. All these things are common faults BTW. I have experienced all of them on my 2008 Vivaro. Well presented.
Cheers bud will give the sensor a try, a mechanic told me to change the egr valve but still sluggish, I'm not going to be happy if I've paid the 80 for the valve and turns out to be the sensor.
Thankyou so much for the video. Had poor power on my Vivaro would struggle to get over 2500rpm in 1 and 2 gears and then take off when it hit 3000 ! Took the maf out and cleaned it with contact cleaner resulting in small improvement and then got a replacement of eBay ( I know not a Siemens but so far so good) £25 jubbly And the van is driving better than it’s done for ages and I’ve not had to spend a fortune at the garage. Ps . I know very little about engines so this and all the forums were a great help . 👍 next vid on hazards not working please 😉
I have the same problem , very sluggish but my engine management light comes on and it becomes more sluggish! But my gear stick isn't floppy ...any recommendations?? Thanks
osborne - New to me Renault Trafic. Same engine, same year. Have it for a few days, questions are piling up. So I'll ask here. Questions: At 2:02 transparent tube on the left, looks like fuel, but its caped and empty. What is it for?! At same time mark 2:02 on right side, beside glow plug relay, looks like a black valve or sensor, with a plug and a couple of pipes attached to the ECU support. What is it for?! On mine both these items are hanging loose. The one on the right hanging upside down with a zip tie holding it precariously. Any enlightenment is greatly appreciated. Thanks Cheers
Hi, I changed my van a few years ago now! However, I dont think the left tube is for fuel, just an air valve possibly. The part on the right is the turbo boost. thks
Did you try to clean the MAF before you replaced it? What is the clamp called on eBay? I did a temp repair a couple of years ago using bungee cord but would like to do a permanent repair.
+J Powell thanks, since posting the question I found it on ebay and fitted it, great little gizmo. I tried cleaning my MAF but no luck, so Ive got a new one to fit. Looking forward to being able to overtake cyclists and mobility scooters any day soon.
So nice to see a video that doesn't have 10 minutes of preamble before getting to the point. Thanks.
I asked my Mrs to sort my floppy gear stick. Worked great
Thanks cured my floppy gear shift stuck in 1st. Used your temp repair with cable ties. If you fix two ties around the actual shift arm either side of the nylon bush and then another two through these and over the top of the bush works perfect almost a permanent repair.
Thanks mate, very helpful for 3 things all in one! without any mental loud music in the background too! I just put 20 quid of petrol in mine (all nozzle handles black at this garage I'd never been to before!!) so needed to see exactly where fuel filter is and how to remove it. Here's hoping a drain out, filter change and fill up with diesel works! Ta
If you have an EOBD reader with live readout (about £25) you can read the MAF g/s output. If it’s 0g/s then the sensor is likely not sending any output.
All these things are common faults BTW. I have experienced all of them on my 2008 Vivaro. Well presented.
Great video because my van is 2004 and it's just starting to do this
If this tutorial has helped you please like. thks
Have you got a link to the part needed in the gearstick repair, or the name of it used in the eBay listing, cheers.
Cheers bud will give the sensor a try, a mechanic told me to change the egr valve but still sluggish, I'm not going to be happy if I've paid the 80 for the valve and turns out to be the sensor.
Excellent video thks very much
Nice one mate very helpful 👍
Excellent video, thanks a lot
Thankyou so much for the video. Had poor power on my Vivaro would struggle to get over 2500rpm in 1 and 2 gears and then take off when it hit 3000 ! Took the maf out and cleaned it with contact cleaner resulting in small improvement and then got a replacement of eBay ( I know not a Siemens but so far so good) £25 jubbly
And the van is driving better than it’s done for ages and I’ve not had to spend a fortune at the garage.
Ps . I know very little about engines so this and all the forums were a great help . 👍 next vid on hazards not working please 😉
Did this sort the problem for good?
Thank you
Mine dose exactly the same !
I have the same problem , very sluggish but my engine management light comes on and it becomes more sluggish! But my gear stick isn't floppy ...any recommendations??
Thanks
first thing to try before buying a new one would be to blast it with brake cleaner spray inside..
Pack the ball joint out with abit of plastic carrier bag. Sorted me right out
How do you fit a Speedo cable on a Vauxhall how do you fit a Speedo cable on a Vauxhall Varvara van
osborne
- New to me Renault Trafic. Same engine, same year. Have it for a few days, questions are piling up. So I'll ask here.
Questions: At 2:02 transparent tube on the left, looks like fuel, but its caped and empty. What is it for?!
At same time mark 2:02 on right side, beside glow plug relay, looks like a black valve or sensor, with a plug and a couple of pipes attached to the ECU support. What is it for?!
On mine both these items are hanging loose. The one on the right hanging upside down with a zip tie holding it precariously.
Any enlightenment is greatly appreciated. Thanks
Cheers
Hi, I changed my van a few years ago now! However, I dont think the left tube is for fuel, just an air valve possibly. The part on the right is the turbo boost. thks
@@jpowell866 - Much appreciated. ;-)
Cheers
20,000 revs😂👌👌👌must be a beast
Did you try to clean the MAF before you replaced it?
What is the clamp called on eBay? I did a temp repair a couple of years ago using bungee cord but would like to do a permanent repair.
+J Powell thanks, since posting the question I found it on ebay and fitted it, great little gizmo.
I tried cleaning my MAF but no luck, so Ive got a new one to fit. Looking forward to being able to overtake cyclists and mobility scooters any day soon.
stuart cole gear selecters clip or clap.
squirt the sensor with electrical cleaner before buying a new one, fixed mine.
What is problem for poor aceration?
Mass air flow sensor need clean or replace 👍
@@joepowell3919 can you tell me what dimension is bolt on egr valve?
Click bait where is the filter change yam yam?
avla en espai