I Doubled the Power of my Scooter! Phantom F12 70cc
Vložit
- čas přidán 23. 03. 2024
- THE F12 FIRST RIDE........INSANE!!!!
After rebuilding my Malaguti phantom f12 and going to a water cooled conversion, I finally got to put my Stage 6 70cc MK2 Racing engine to the test!
Inner rotor ignition is a game changer!
-
MOPBOYZ MERCH & GEAR. : www.mopboyz.com/
-
NEED SCOOTER PARTS? USE CODE "MOPBOYZ" & SAVE 5%. CLICK HERE:
scooterswapshop.com/?ref=MOPBOYZ - Auta a dopravní prostředky
F12 is a certified ripper😍! Small side notes:
The bog from the start might be the shimming, belt not going it's full travel. Or it would prefer 4-4.2gram rollers.
A lot of new S6 R1200 / R1400 / R/T MK2 exhausts leak from the silencer. In Europe we just put gasket maker on it, let it cure for a couple hours and go full throttle. Sounds a bit ghetto but it works.
Waiting on that disc brake conversion!!
love waking up to a mopboyz vid
my dude🤝
@MOPBOYZ awesome video check out my isinwheel s9max electric scooter that's my ride I get around town on
When the wind slows you down faster than the brake 🤣🤣❤️🇬🇧
My silencer flew off my stage 6 pipe on the road back when I had my stage 6 bike with a sports cylinder. That bike would do 60mph easily. I blew up that cylinder from bad squish clearance. piston was hitting the head. I parted out that bike after that. I have a ruckus clone bike now, with a 100cc stock engine and a v8 pipe. other than that stock. It does about 55mph no problem. I am much happier with the speed vs. $$$ spent considering I had over 1000$ in the first bike, and less than 500$ in this one with less problems. Thanks for the share love the makita battery.
lose the stage six exhaust get an yasuni c21 ! , carb air screw 1 1/2 turn. try and get full malossi overrange. if you want to go full wheely mode get and polini speed control vario. nice bike you have there! i owned 2 my self.
Nah full stage 6 is better
Good job ! This is a very nice and taste tuning on this scooter . Keep up the good work !
What a ripper such a nice bike can't wait to see it dialed in 100%
Hey brother, watching from Puerto Rico, I have a F12 LC foggy. I've just finished watching the whole series and you have motivated me to build mine. Haven't even started in years, so wish me luck 😅
new road 100cc
the second tune you made with the stiff contrast spring is actually most of the tunes you can hear in a '' 100cc malossi trofeo '' races , they get all the torque for those sketchy curves in the Magione track , you got that sweet spot with the soft contrast and it really fits on a 70 cc , altough a stiffer one is better from 86 cc and above
that thing rips, good job on the build
The F12 was so popular here in the 90s, awesome machines.
The F12 is my fave - love the Foggy rep. My Ludix Blaster runs a very similar rads and header tank set up. For easy bleeding just prop up front wheel and give it a few braaps with the tank cap off. Usually gobbles down another 200-300ml of coolant. Careful running too cold, chance of cold seize. Consider a thermostat 👍 great vid
Hey man, greeting from Italy. Those things (Yamaha Aerox (GP1) and Yamaha BW’S as well) were all the rage in the 2000s. Some tips, a common mod back in the day was to install a GP1 radiator as well, in order to get usable temps on higher end cylinders. Also, as you already noticed, you should get the rear brake situation sorted out. Idk if you know this, but the Phantom was also sold with a read disk brake, you could try to get the casing with the disc and caliper mounts, as I don’t know if adapting a disc setup was possible with the drum brake casing
I get so excited over these ped build now haha. Love these vids man
Been waiting all week for this one to drop its a beast 💪
Just checked out this channel for the first time today, been wanted to build up a scooter to mess around on. Then I saw that EZ90 cub you got, that thing is clean! Been looking for one nothing in my area unfortunately
It's always a good day with another MOPBOYZ upload
my guy 🤝
Yess!!! Getting me pumped on sr50 of similar build going rn!
Great job on that swap! That thing gets it! 👍👍 Maybe you could send that pipe back for a new one. Doesn't seem right to be leaking from the get go. Seeing those fancy rear wheel stands, makes me wonder why manufacturers ever went away from the center stands on bikes. My '67 and '69 Honda Trail 90's both have the center stand, and they are awesome for working on the bike.
insane build ! good shit
I live in vegas but I grew up in france and used to own a mbk booster with a malossi MHR 70cc, Malossi MHR exhaust, internal rotor ignition MVT, stage 6 crankshaft, transmission kit overrange MHR and a carburator PWK 26, this thing was flying, I always wanted to try to swap it to liquid with a mbk nitro engine but I grew up and left my scooter behind haha
Love your channel, it makes me wanna buy one again and im 34 yearsold today haha
keep up the good work man !
Awesome content keep it up, phantom looks beautiful...
thanks my dude
I' m from Romania and I love to watch your videos .
Respect man. :-) 😀
Love seeing new episodes
Getting mine 70cc f12 soon 🤩
Finally been looking for a banger vid
😤😤
Ripper is Born 💯💯
Love it!
I need storage bins like that! My garage looks messy on my channel! Smh.
Been waiting for this video so bad
actually i have got an f12 liquid cooled from the factory , i think the frame is a little different because that coolant reservoir actually mounts inside the glove box
What a beast, and the wind was wild the otherday.
Great vid bud!!
congrats to 100k, yuo should amke some sweet merch, i would 100% buy it
Bro, I love these scooters. I’m gonna have to buy one one of these days.
so cool man. plus that thing sound awsome🔥
thanks dude!
Killer f12 that boi sick🚀
hey man just noticed after watching this video for the 100th time you are still running af vacuum fuel system. You have to upgrade that to a better "petrol tap" I would suggest the malossi one. because the vacuum system cannot keep up if your riding full throttle for to long and that will result in the bike bugging out and run lean and foul your spark plug or destroy your piston. but a really nice video greetings from Denmark
i have an inner rotor kit with no charging, how do you change the wiring so that the lights run off of the 18v battery, would help alot as i have to charge my motorcycle battery every 2 days to keep it fully charged.
What did you use for your light replacement. Did you only change bulbs or sockets also. I need to for my 2001 F12 LC DD and 2003 f12 LC DD
how do you break in a new top end ive just got one for my gilera just wondering if you do heat cycles and how thnaks
100k bro insane
Sick dude!!! Also a rare find this day here in europe... i still own my firefox f15 from when i was 16 years old wich is already 17 years ago lol iam gettin old dude.. iam still running the mk1 stage 6 racing on it wich is 14 years old now but mine has a 2 piece cylinder head.. is that the difference between the mk1 and mk2? mine really go's the block, and the cylinder are tuned by xsh back then those stage6's racing ones can really put out crazy amount of power..
the cap for the reservoir is identical to the one on a stock derbi senda, you can buy them new all over europe.
hes from the states
@@MartZilka he often buys from Oversæt as far as Im concerned
Have a malaguti f12 phantom,problem either front brakes,piston is sticking how to disassemble to fix
Sounds really, really good. 👍 👍 👍
Man that dog rolls. Hold on to her trev.. mop boys forever..old man mop 😊
thanks man🤙
Hey, I also have a problem on ma ac minarelli with the drum brake, It is also very bad and i've done everything a brake line, pads, double spring, even switched to another wheel and it is good for 2-3 days and then it just disappears. Will switch to a rear disc brake
Damn son, I thought my old F12 that did 120km/h was badass, this is on another level ❤
I love your Videos best Scooter Channel Out there greetings from Germany
Whats your cvt setup, like rollers springs and clutch?
If you go to some where that sell plastic single brick covers 9×4inch think they do them in Aliminum aswell
They will look good instead of holes
there dirt cheap
what they are for is going over the air brick in a house
stops mice getting in
hello bro i love wathcing ur videos i got 1 question i have a kymco agility 50cc 4stroke and im tryna put a malossi 88cc sport cilynder can u tell me how much kmh i hit if i put that malossi cilynder in?
honey wake up the mopboyz just posted
Greetings from Philippines with ❤
What really makes it faster I have a 50cc but it's my only transportation to work and it takes a bit I wanna learn
Honey wake up mopboyz has posted!!
Have you tried using some Red armor 2 stroke motor oil in your 🛵 scooter? If it's A 2 stroke engine? on your scooter that is in the video you're doing on the that engine build.
I'm missing a stage 6 subframe. allowing your carburetor to be mounted directly above your rear wheel.greats from Amsterdam the Netherlands
Sounds Sweet 👽👍🏻
What led bulbs did you use explain please
i ride cpi gtr 50 cc 2005 it goes 70 km/gh or 45 under my weight love your content btw
How do you think the S6 MK2 would go in a prebug? Bit much?
HEY SCOOTER FREEEEEAK 🤪IM LOVING THE F12 BUILD ,GREAT TO SEE YOU,VE GONE TO LIQUID COOLING .SURE LOOKS MEAN IN RED & THOSE LIGHTS ARE REAL STRONG .IM BUILDING A F15 FIRE 🔥 FOX 🦊 SO IM PAYING CLOSE ATTENTION.NICE TO SEE YOUR RUNNING A DECENT CASTOR BASED OIL JUST MAKE SURE ITS MIXED WELL IF YOU FILL UP ⬆️ AT THE GAS STATION.DONT WASTE THAT CRISPY ENGINE DADDYO 😊
i sent a DM on instagram about the regulator setup for the makita battery- im also running a makita battery on my KTM 150, but my lights just explode because its extracting 18v (i have a regulator lying around, just need to know how to wire it)
bros consistent with the lunch break uploads
Shes a beauty, I got rid of my Aerox and got a 2017 runner sp
Trying to get an f12 or a jog just like yours 🔥
Why didnt you put the malossi rc1 on the malleguti
Goooood 🙌🏽❤️
In the future you could maybe do tuning on an Longjia Firefox 4 stroke😂
From my experiences you don’t wanna warm it up not using the water pump, the point of warming it up is warming it up slow so otherwise it wouldn’t be necessary at all
Never doubt a malaguti scooter they are aswome
How did you import one of these?
there is also the opportunity to install the carburetor to the rear. there is a special subframe that makes that possible. looks good when installed. have it also on my aerox and sr50. keep up good work - the ducati version looks awesome.ah and i forgot. i wont reccomend stage6 parts. the exhausts are quiet cheap stuff in quality. we here in germany (home of s6) had alot of those pipes... quality is bad, price is high - i recomend yasuni
how much is the fuel consumption with this setup?
Radiator small!! but nice project, try to review the rollers too
ya boi using motogp racing technigues on a moped with parachuting... Lets see the full chute with the Doctor's dangle on entry next :)
I have a 2000 model SYM JET100 Ang I want to upgrade it just to add power as your unit
it would be super cool to see you build a Peugeot Speedfight 2 lc. if it is even possible to get one in the US. Greetings from Denmark
You should check your brake cable maybe its squishing its housing
You should also buy a Yamaha Aerox, also called MBK Nitro. I'd love to see a video of that one.
sounds nice
i love your videos dude keep it up man and i have a qusten what is the best ubgrade for my zuma
best upgrade is the cvt!
Please buy a gilera runner bro you would love a 50 and the 172 two strokes they are tuning gold
Wait!!! You charge the battery when you run?
doubled the power(again)😂❤🔥
What kind of LED’s are you using I need those😂
How much oil you running in a full tank
Miss the Durango ymca days man
Nice!
Is the wiel have the problem
Hallo, which Main jet and second jet Are u using ? Greetz Stage6RoxXx
What is your gearbox?
Hey mate love the build I’ve done exactly the same on an air cooled Zip. Malossi overrange instead.
Blue contra and half mix 4.5 and 4.7g rolls. Rpm hovers around 11,600rpm, only other difference is a Malossi Mhr team pipe. I would have thought you would want to be just under 12,000rpm seeing your using the R1200 pipe. Where are you at now with rpm?
can I ask you a bit about the zip haha I have the same setup
I am jealous of your weather my bike wont start under 70 😊
The back brake issue. Have you tried taking the pivot arm off the splines and adjusting it that way ? MOPBOYZ
yessir !
You have to buy gilera runner 180cc sp🔥🔥
MOPBOYZ!
She's a ripper🤘
sick ride bro my ride doesnt even ride lol
Question please: I have a 06 BWs, will be putting a Polini 70cc head on this summer. Will up the jet by 10% and have a temp gauge. Do I need to suppliment my 2T oil by a little premix? or will my oil pump handle it?
Thanks so much, love your content.
i highly reccomend you get rid of the oil pump, i wouldn't want to risk my motor, if the pumps fails, but i don't think you will need to add any more oil, except add some for the breaking in phase
@@kristers-eb6xb Thank you so much!