How To Change Clutch Master Cylinder Fiesta Mk6 (Feels Like New)
Vložit
- čas přidán 7. 05. 2022
- In this video, I show you how to change the clutch master cylinder on a ford fiesta mk6, easy job make such a difference to the way the car drove, was very overdue.
Parts and tools: -
Clutch master cylinder
www.amazon.co.uk/Qinndhto-200...
WD-40
www.amazon.co.uk/WD-40-Specia...
Brake Fluid
www.amazon.co.uk/Comma-BF41L-...
Socket set
www.amazon.co.uk/VonHaus-215-...
Gloves
www.amazon.co.uk/Coated-Orang...
Disclaimer:- McLaren Media & McLaren_Automotive_Photography present the facts and content in these videos on a strictly fun and informative basis, these videos are not guaranteed to be 100% accurate.
McLaren_Media and all associated names assume no liability for property damage or injury incurred as a result of any information in this video. Use this information at your own personal risk.
McLaren_Media always recommends safe working conditions and the correct tools and safety equipment before undertaking any type of vehicle repair or photography shoot of any nature.
No information shown in any video will result in any expressed or implied warranty or guarantee of any personal results.
Injury, damages, loss or health implications that may result from improper use of tools, parts and unsafe hazardous working areas or locations and from the information in this video is the sole responsibility of the user and not McLaren_Media.
Titles and Idents are available at:-
www.productioncrate.com/#ref=...
Redbubble Shop:-
www.redbubble.com/people/McLa...
PICFAIR Shop:-
mclaren-media.picfair.com
• Make This DIY Brake Bl... - Auta a dopravní prostředky
Best how-to video I've ever seen, so clear and informative thanks
RAC car service place quoted me over $2000 to do this, daylight robbery. bought the part and did it myself.
more than car cost itself😂
Great guy I follow all his stuff Highly recommended
Thank you so much for the amazing detailed explanation and guiding, I was able to fix mine myself exactly the way you explained and it works, astonishing work mate.
Thanks mate glad it worked for you!
Top man! Thanks for sharing, this video is very helpful 👍👍👍👍👍👍
Great video. Thanks, mate.
Thanks for uploading this, it was a real help. 👍
No worries mate glad it was helpful
Really useful video, thank you!
Great video mate! In my case the spring just broke, but this video showed me how I can replace it in no time, thanks!
Thanks mate glad to hear it
Super Video.Thanks!
Very good video mate fairplay
Thanks so much for this detailed video. I needed to change the bushes on the clutch pedal and wasn't sure how to get the clutch pedal out and this video really helped me.
Did you have a wobbly clutch pedal?
@@Cohiba-pu6so Yes, the existing bushes were quite worn. Replacing them helped a bit, but the pedal still had a little more play in it than I would have liked. It's a 17 year old car though, so I was happy with the end result.
Great video mate
Your a godsend. Perfect video. Although my master cylinder looked fine lol
Best way to do this by far, it's fiddly as F but managed it in the end cheers pal
Thank you mate. Mine went at a red light last night, plastic snapped. Now going to buy part and do it myself ;)
Ahhh bad luck haha , yeah not the worse job in the world but good luck with it
So useful!
Great vid
If you are a larger person it may be wise to remove the driver's seat to aid access to the pedal box.
Hi mate,this is the best tutorial on youtube to do this job,im currently doing one now and having trouble getting bolt to go through clutch peddle have manage to get master cylinder locked in place,i im doiig it the right way ? by putting master cylinder on first i got the clutch peddle in place as well just need to get that 13mm bolt to go through
Well done mate well explained I was going to put mine in the garage but I think I’ll do it myself now
Been losing Hydraulics in my clutch for a couple weeks now. Took it to one garage who went on a road test with it, claims that the gearbox was dying and I needed a Transmission fluid replacement. If that didn't work then the whole gearbox would need refurbishing. Was advised to get a 2nd opinion. So I spoke to a few other garages and all said that the problem is either the master cylinder or something within the clutch itself. Most likely outcome is the master cylinder. Can't get it fixed until Wednesday, is it still safe to drive until then?
Hi, Thanks for the video. Why did you replace it?
Hello mate. I've just changed my clutch master cylinder on a Ford Fiesta ecoboost 2013. Mechanically its sound but I now have to press both the clutch and brake pedal to start. I only ever had to press the clutch in to start.Ive replaced both pedal switches but still the same. Any ideas?
Hi my fiesta clutch is hard to press and when the car gets hot the gears gets stiff to engage don’t know if it’s my clutch pressure plate of master cylinder on the clutch pedal
Was it leaking fluid? My Fiesta struggles when shifting into first and reverse for the first couple of minutes, then everything works flawlessly. Before changing the clutch I wanna definitely try this first (the car is a 04 1.25i with 38k miles)
What engine is this for?
video to change clutch in mk7 fiesta please 🙃
thinking about doing it myself, but there appears to be a lot to it
it might take me 2 days
I have a similar issue with my 2012 grand cmax clutch pedal was buried to the floor 2 weeks ago charged £308 inc vat for master cylinder replacement and just had the same issue within 2 weeks of replacement
Yeah mine came back i think its the slave cylinder in the box apparently they leak
Hi mate where is the bleeding screw
Will the master cylinder be different on a duratec engine ? Or are they same as the part that you are fitting?
Im pretty sure all the stuff to do with the clutch and gearbox is the same across the fiesta engine types , i can’t imagine ford would have developed two different master cylinders , if you just peak up under the pedal you should be able to see it
Hi, again mate, I’m still having a absolute nightmare with this fiesta, I’ve changed the gearbox as old one was busted, I put a new slave cylinder and master cylinder then bled the system, I’ve since been getting an ongoing accumulation of air in the clutch lines, I’ve tried the two person bleeding, I’ve reversed bled the system and after a couple of days I’m having trouble changing gears so I stop the car and bleed the clutch and the first bit of fluid is frothy with bubbles, I bleed it again till no bubbles and same thing happens. It’s not leaking fluid and reservoir isn’t dropping.I have heard it could be the seal in the slave cylinder sucking air in. I think I might have to take off the gearbox and put a new slave in and I might reverse bleed it as it states in the Ford manual. Maybe that’s why if you depress the slave before install it voids warranty. Just wanted to see if anyone has had this issue before. Thanks 😊
Did you fix it with a new slave cylinder??
Great work mate, how long did this take roughly ?
To be honest was probably a couple hours hardest part was bleeding it
Hiya, do you have a video on how to bleed the clutch too ?
the bleed screw should be near the battery case and gearbox (its somewhere in the middle if your looking from the top). looks like a oval white shape
I'm looking to save a million quid too! Can you make up the difference if I don't get there?
I can’t locate the bleed screw, can you let me know where it is bro
On the front of the gearbox theres like a weird plastic screw looking thing with a rubber cover on it
Where is the bleed screw located can’t seem to see ot
Its right down on the gearbox side its got a rubber cover on the tip
@@mclaren_media9145 thank you ever so much lad
@@mclaren_media9145 Is this the bleed screw on the slave cylinder ?
Would this be the same as the Fiesta ST?
Feel like the ST would have the same setup couldn’t think of a reason why it wouldn’t be the same
I can't get the plastic bit to budge, won't slide down the rod :-(
thats what she said
Did you undo the bolts holding the master cylinder to the bulkhead, and did this help?
Hi mate why did you have to do this job? What problems were you having?
My clutch pedal was like paused before anything happened it was also going all the way to the floor and no change in gears and also the bite was like half an inch off the floor however I changed this and it helped a bit but the main problem was the slave cylinder in the clutch area
@@mclaren_media9145 when you say paused. Do you mean when for example in first gear then trying to change to second it doesn’t let you change while you pressing on the clutch instantly but waits for a bit like a second or two second then let’s you change?
@@mclaren_media9145 how can you tell if a slave cylinder is not performing right?
@@sameqy yeah so like you said hard to change gears and felt really mushy and unfortunately there isnt a way to test it without actually taking the gearbox off but if you change the master and the problem is still there is either the slave or the actual clutch is playing up itself i do have a video on my channel also showing you how to do the clutch but its a big job
@@mclaren_media9145 yeah I did the clutch. Very hard job. But I’m looking to avoid to take the gear box off again 😂
20 pounds we'll done garages rip off