mine works pretty good, had to take it apart and put it back together when u first got it a few times for it dry fire properly. hit the range 250 round jammed 3 times second time 400 rounds and only thing i noticed is it works better if you do bursts if i slowly release the trigger then it won’t jam i would just have to re chamber. some cool for 200$
I’m having nothing but problems with mine for my Glock 19 gen 3. First one I received after install slide would not go back on, I returned. Second one I received, slide would go back on but I could not pull the trigger, there is some kind of set screw on the back of the trigger that’s hitting the gun frame preventing the trigger from moving back, not sure what that screw is exactly for. No one ever answers the phone there, I left a message, no response.
the g flex trigger I got didn’t work. My fix was use your stock firing bar from your old trigger for some reason the g flex firing bar just didn’t want to work with my Glock
Spent 250 on this trigger and it don’t even work or none doesn’t shoot when I release I want my money or a new one and I already email y’all and y’all sent me this link and I try it and it still don’t work
But shouldn't u be able to keep holding down on the trigger until your ready to left off that 2nd round? Only way mine works is if in squeeze it and let go fast so i can only let off 2 round bursts. If i hold how after my first shot and let go it will fire off the 2nd round but wont Cycle so I have to pull the slide back to chamber another round bc the trigger wont go back in play. @user-yf4uh4lv6w
@@TMDubb I had to complete take mines apart and put it back together and oiled it and I try it empty and you can hear it click on both just that you have to make your sure your slide hit hard for it to work on the release
Installed on a model 23 gen4.. Adjusted as instructed, trigger hangs up won't return forward so I readjusted the opposite way and atleast it let's trigger return ..no binary function only single shot.. Rack, pull trigger it fires, hold trigger re rack release trigger no fire..re rack again to get trigger fire..I'm stumped .
Ive got the trigger in my psa dagger (i know that immediately voids warranty) but it shoots 5-6 rounds then trigger locks back with a live round in the chamber. Any ideas on how to fix?
Great info mines jam after about 9-12 shots not the gun itself jams but the trigger locks after rack another round it’s back to bumping … so if I do this it should be good right I also read u gotta break her in a couple hundred rounds as well
Alot of comments saying it didn't work but Mine Did but its weird. I put mine in there normally out the package and the trigger was only half way resetting. Then i took it out did what he did and the same thing.. so I oiled it up and started dry firing acouple times and it works now. i feel like alot of them come to tight and too loose and you have to get it just perfect. dumb that u can't just throw it in and expect it to work. And it seems like when i hold the trigger after a reset it struggles to come back. So either im shooting very fast or not at all 😂
There are some many variances in Glock frames that sometimes they will need a angle adjustment on the connector, lubrication is a big part of the equation as well, the trigger staying back is normal during dry fire and will not do that when the gun is actually cycling, also your finger can out run the trigger, take your time pulling and releasing until you get the flow of it then run it faster
Why when I first rack the slide dry firing it’s hard not to sometimes when it rest shoot it does it by it self without me letting finger off the trigger
Reading through the comments I’m having the same reset issues on my gen. 5 G19 trigger. Are they testing them before they ship out? Tried a lot of suggestions with no luck.
Im having the same issue. It fires and chambers another round but the trigger doesn’t reset. And the one or two times it did work it was so random i didn’t even get to enjoy it. I have the lifetime warranty but they really don’t seem to want to give me a new one or my refund
@@PerformanceTriggersi did. They connected me with a man named Chris who told me my trigger bar was too far out and to push it back in some. Then when i was finally able to get out to the range it didn’t work and his response was “Hey man sorry, not at the office. Try to play with the bend of the connector like we did.” I want a SOLUTION or a working trigger. Not to have to mess with it everytime i pull the trigger.
Bruh same here I tried this and it didn’t work in my gen 5 Glock 19 it’s not a p80 it’s a stock Glock with upgraded irons I got it to do the first break so it would shoot cycle I release the trigger and it just gives me a dead trigger every time rerack the slide trigger pops out shoot let go no shoot dead trigger
I’m having the same issues, probably going to refund it if this doesn’t fix it for me. Apparently it isn’t working for others and this is already my second g flex and I had a gunsmith install with no luck and or advice on fixing the issues. Also He said the first trigger he installed fucking fired a round as soon as he racked it into the chamber..
just dropped one into my gen4 g19 and the trigger would just lock up after a round was fired and i would have to rack the slide back to get the trigger to reset. I tried this and now it seems to just performs like a regular semi auto. anyone else experience this? any tips? otherwise I may try to return as faulty.
I got mine a day ago and i couldn’t get my slide off almost bending my spring. Something is most definitely wrong because the trigger feels real loose but no click or reset 😅
I just got mines yesterday but my slide won’t go on with the gflex in the gun then I put standard trigger back the slide goes on again it a Glock 17 gen4 I want my money back I was amped for this bull shit
Email us we will help you clientcare@performancetriggers.com All you have to do is press down on the slide buttons if your slide isn’t going on smoothly
@@PerformanceTriggers I tried that same results even my apex trigger-the slide goes on no problem and PR trigger but gflex trigger no hope I just hope They ain’t scam me💯
@@The_Truther I was able to fix that part. But it only does the binary like once in every 8 times with dry fire. It’s not very reliable while I dry fire
@@PerformanceTriggers I bought a Gen 4 g flex and put it in my gen 4 Glock 21 45 ACP! I swapped out the ejectors and it fits perfectly but it won't reset! I bent the connector up and down but it won't fully reset! What do I need to do?
@@PerformanceTriggers That's a possibility because the g flex has two grooves in its trigger bar and the G21 only has one groove! Everything else is a perfect match and fit! I'm sooo close lol!
Just so we are clear...the only thing I did was remove the ejector from the g flex and swapped it with the G21 ejector... that's it! I didn't swap trigger bars!
My g flex trigger I installed in my Glock 23 and it literally shots one time and the slide stays back I tried it in my p80 and I got one mag to run but no binary it ran like it was normal then I tried it again and the trigger didn’t even wanna shoot nomore smh
@chancedull7446 I just got mine today and this bitch ain't working. It didn't fire at all and I was having trouble aligning that rear grip pin to go in
@@bigtruckin216yes I had a hard time fitting the back pen into it also after my 1st exchange for another one. So I said fu it and just pushed down unnecessarily hard and got it to fit. Possibly could of broke doing so. But it does work. Only problem is that if I hold down on the trigger after the 1st shot letting off the 2nd round if I hold it for long the trigger will go dead so pretty much only letting off 2 shots so in a Self defense I'd have to actually let off 2 rounds at the threat unless I want the trigger to go dead on me.
@@bigtruckin216 yeah i did the same as dude just had to push it in harder but it still a lil iffy, it will go dead on me too sometimes either the trigger just wants to run fast. be Consistant and follow thru with trigger pulls and release too.
this worked. and mine looked like the correct one in the video. i still bent it a tiny bit and now it works perfectly! 🎉
Great video…. Fixed my issue 100 %.
Good job Sir.
Glad we could help
mine works pretty good, had to take it apart and put it back together when u first got it a few times for it dry fire properly. hit the range 250 round jammed 3 times second time 400 rounds and only thing i noticed is it works better if you do bursts if i slowly release the trigger then it won’t jam i would just have to re chamber. some cool for 200$
I picked up my G flex today. I can’t wait to take it for a spin
How did it go?
I’m having nothing but problems with mine for my Glock 19 gen 3. First one I received after install slide would not go back on, I returned. Second one I received, slide would go back on but I could not pull the trigger, there is some kind of set screw on the back of the trigger that’s hitting the gun frame preventing the trigger from moving back, not sure what that screw is exactly for. No one ever answers the phone there, I left a message, no response.
Just bought this trigger tried getting ahold of you guys about the issue I’m haveing and still have not gotten a response…
Best thing ever got one on a Glock 17 gen3
the g flex trigger I got didn’t work. My fix was use your stock firing bar from your old trigger for some reason the g flex firing bar just didn’t want to work with my Glock
After this fix do you have any more malfunctions?
Hmmmm…. Can’t believe I didn’t think of that. Thanks
we need an update bro dnt leave us hanging 🤦🏽♂️😂
I’m goin through the same issues with a g23 I’ve built.is yours still running properly
@@user-wr8cg7qk3h any update on this?
Spent 250 on this trigger and it don’t even work or none doesn’t shoot when I release I want my money or a new one and I already email y’all and y’all sent me this link and I try it and it still don’t work
Release faster
But shouldn't u be able to keep holding down on the trigger until your ready to left off that 2nd round? Only way mine works is if in squeeze it and let go fast so i can only let off 2 round bursts. If i hold how after my first shot and let go it will fire off the 2nd round but wont Cycle so I have to pull the slide back to chamber another round bc the trigger wont go back in play. @user-yf4uh4lv6w
@@kasper7787same here dry firing does the same
@@TMDubb I had to complete take mines apart and put it back together and oiled it and I try it empty and you can hear it click on both just that you have to make your sure your slide hit hard for it to work on the release
@@kasper7787did u ever figure that out?? Same issue with mine but idk what to do
Installed on a model 23 gen4..
Adjusted as instructed, trigger hangs up won't return forward so I readjusted the opposite way and atleast it let's trigger return ..no binary function only single shot..
Rack, pull trigger it fires, hold trigger re rack release trigger no fire..re rack again to get trigger fire..I'm stumped .
Ive got the trigger in my psa dagger (i know that immediately voids warranty) but it shoots 5-6 rounds then trigger locks back with a live round in the chamber. Any ideas on how to fix?
You may be outrunning the trigger with your finger email is so we can walk you through how to shoot
It
Great info mines jam after about 9-12 shots not the gun itself jams but the trigger locks after rack another round it’s back to bumping … so if I do this it should be good right I also read u gotta break her in a couple hundred rounds as well
Same is happening for me but im nervous to mess it up and void warranty
I liked it)
My gflex trigger is makin my gun slide lock every time It shoot 2 bullets what should I do
Alot of comments saying it didn't work but Mine Did but its weird. I put mine in there normally out the package and the trigger was only half way resetting. Then i took it out did what he did and the same thing.. so I oiled it up and started dry firing acouple times and it works now. i feel like alot of them come to tight and too loose and you have to get it just perfect. dumb that u can't just throw it in and expect it to work. And it seems like when i hold the trigger after a reset it struggles to come back. So either im shooting very fast or not at all 😂
There are some many variances in Glock frames that sometimes they will need a angle adjustment on the connector, lubrication is a big part of the equation as well, the trigger staying back is normal during dry fire and will not do that when the gun is actually cycling, also your finger can out run the trigger, take your time pulling and releasing until you get the flow of it then run it faster
Why when I first rack the slide dry firing it’s hard not to sometimes when it rest shoot it does it by it self without me letting finger off the trigger
Email us clientcare@performancetriggers.com
Man that shit was a waste of money I want my money back
Contact support at Performance Triggers for an exchange or refund.
@@TMDubb odd don’t see any emails from you why don’t you email us this second and let’s resolve any of your issues clientcare@performancetriggers.com
Reading through the comments I’m having the same reset issues on my gen. 5 G19 trigger. Are they testing them before they ship out? Tried a lot of suggestions with no luck.
Email us to resolve this
Clientcare@performancetriggers.com
Im having the same issue. It fires and chambers another round but the trigger doesn’t reset. And the one or two times it did work it was so random i didn’t even get to enjoy it. I have the lifetime warranty but they really don’t seem to want to give me a new one or my refund
Reach out to us clientcare@performancetriggers.com
@@PerformanceTriggersi did. They connected me with a man named Chris who told me my trigger bar was too far out and to push it back in some. Then when i was finally able to get out to the range it didn’t work and his response was “Hey man sorry, not at the office. Try to play with the bend of the connector like we did.” I want a SOLUTION or a working trigger. Not to have to mess with it everytime i pull the trigger.
@@PerformanceTriggersi get it if this was something off amazon. But at this point i paid $250 for a headache.
Bruh same here I tried this and it didn’t work in my gen 5 Glock 19 it’s not a p80 it’s a stock Glock with upgraded irons I got it to do the first break so it would shoot cycle I release the trigger and it just gives me a dead trigger every time rerack the slide trigger pops out shoot let go no shoot dead trigger
Our gunsmithing team would love to help you troubleshoot this. Please call them at (406) 272-8182.
You fix it?
@@nalabishop402 Anyone who is not satisfied with their product is perfectly able to send it back for an exchange or full refund.
I’m having the same issues, probably going to refund it if this doesn’t fix it for me. Apparently it isn’t working for others and this is already my second g flex and I had a gunsmith install with no luck and or advice on fixing the issues. Also He said the first trigger he installed fucking fired a round as soon as he racked it into the chamber..
@@PerformanceTriggersbut no body answers?
Mine will shoot about 5-6 rounds then the trigger locks back and stops shooting. I have to rack it back again and a live round comes out.
just dropped one into my gen4 g19 and the trigger would just lock up after a round was fired and i would have to rack the slide back to get the trigger to reset. I tried this and now it seems to just performs like a regular semi auto. anyone else experience this? any tips? otherwise I may try to return as faulty.
Email us tomorrow
Clientcare@performancetriggers.com
I got mine a day ago and i couldn’t get my slide off almost bending my spring. Something is most definitely wrong because the trigger feels real loose but no click or reset 😅
Email us at clientcare@performancetriggers.com
Did you ever get it fixed ?
I just got mines yesterday but my slide won’t go on with the gflex in the gun then I put standard trigger back the slide goes on again it a Glock 17 gen4 I want my money back I was amped for this bull shit
Email us we will help you clientcare@performancetriggers.com
All you have to do is press down on the slide buttons if your slide isn’t going on smoothly
@@PerformanceTriggers I tried that same results even my apex trigger-the slide goes on no problem and PR trigger but gflex trigger no hope I just hope They ain’t scam me💯
@@lorenzowilson7222 email us and let’s figure this out no big issue if it doesn’t work we send you a new one
My shxt only work when i have to the 2 pins out once i put them back trigger don’t reset
Email us Chris@perfomancetriggers.com
I did this and it still does the same shit still it would shoot 1 then release 1 then just stop
I tried to do this and I can’t even get the trigger to actually click. I just pull it and it just straight mush. Anyone have any solutions?
Can you explain more? I just installed mine today with no issues, maybe I can help
@@The_Truther I was able to fix that part. But it only does the binary like once in every 8 times with dry fire. It’s not very reliable while I dry fire
Check my comment I have the same issue
Can someone answer a question I have about the g-flex trigger?
Go for it
@@PerformanceTriggers I bought a Gen 4 g flex and put it in my gen 4 Glock 21 45 ACP! I swapped out the ejectors and it fits perfectly but it won't reset! I bent the connector up and down but it won't fully reset! What do I need to do?
@@WillyMandingoWinchester I don’t think it’ll work with the glock 21 the trigger bar of the 21 is completely different than a G Flex trigger bar
@@PerformanceTriggers
That's a possibility because the g flex has two grooves in its trigger bar and the G21 only has one groove! Everything else is a perfect match and fit! I'm sooo close lol!
Just so we are clear...the only thing I did was remove the ejector from the g flex and swapped it with the G21 ejector... that's it! I didn't swap trigger bars!
I got a 19x gen5 and it’s not working for me
We need a reply on this
My g flex trigger I installed in my Glock 23 and it literally shots one time and the slide stays back I tried it in my p80 and I got one mag to run but no binary it ran like it was normal then I tried it again and the trigger didn’t even wanna shoot nomore smh
Contact us at Support at Performance Triggers. We will walk you through tuning it or replacing it.
Check ur barrel if its scratched its from it rubbing against the slide while firing or cocking he firearm.if so u need a new barrel
@@PerformanceTriggers REACH BACK TO YOUR CUSTOMERs!!!!
@@TMDubb waiting on you to email I just responded to your CZcams comment in 40 seconds , what’s the hold up where’s your email ?
Or you could just do this to a factory glock trigger and you have your own g-flex 😎
Wrong , G flex has a proprietary trigger bar, housing , housing insert .
Man this trigger is not working. I did exactly as explained in the video and still not working. Requesting a refund
Email us tomorrow clientcare@performancetriggers.com
Spent 250 on fucking trash
Why don’t you reach out to them ? They helped me on the spot
Will try
@@natemoneee never saw your email clientcare@performancetriggers.com
I got mine to finally work, but the trigger pull is a little over 10 pounds. It's a absolutely terrible.
You don’t have it seated right make sure it is flush with rear grip pin, and oil it up
@chancedull7446 I just got mine today and this bitch ain't working. It didn't fire at all and I was having trouble aligning that rear grip pin to go in
@@bigtruckin216yes I had a hard time fitting the back pen into it also after my 1st exchange for another one. So I said fu it and just pushed down unnecessarily hard and got it to fit. Possibly could of broke doing so. But it does work. Only problem is that if I hold down on the trigger after the 1st shot letting off the 2nd round if I hold it for long the trigger will go dead so pretty much only letting off 2 shots so in a Self defense I'd have to actually let off 2 rounds at the threat unless I want the trigger to go dead on me.
@kasper7787 I got it to work finally I had to adjust the trigger bar slightly. That pin was still a bitch tho lol
@@bigtruckin216 yeah i did the same as dude just had to push it in harder but it still a lil iffy, it will go dead on me too sometimes either the trigger just wants to run fast. be Consistant and follow thru with trigger pulls and release too.
Shit didn’t work on my Glock 31 or 22 didnt even sit in the lower at all
You have to cut the two plastic tabs sticking out the bottom by the pin hole
Too many problems.. and complaints.. trash product. For the longest I’ve wanted to own one, just to be flooded with disappointment
Email us we will send you one if you don’t like it sending back how about that
@@PerformanceTriggers i did
I did this with my new g flex for gen 5 it still doesn’t work what can I do to fix if what you just told me to do doesn’t work
I just tried this fix took it to the range and my gun still won’t shoot on release of the trigger
I also have to squeeze the trigger super hard to even fire
I have the same problem
@@gagelee1020 yeah it’s kind of annoying that they aren’t replying to me with potential fixes
Me to same problem