Rockler recently came out with their own under mount drawer slides that are much cheaper and just as good of quality as Blum. You might try them and save yourself a few bucks. Blum is $41 for 21 inches at my local Rockler, their brand is $27 for the same length.
I’ll have to check them out. Unfortunately I don’t have a Rockler around where I live so I have to buy them online. My biggest gripe with Rocker is their return policy so I don’t order from them very often.
I just came across your channel and really enjoyed this video. It's a perfect example of how after action narration limits any waste of time or verbosity. It also flows incredibly smoothly. Your explanations are great and the humour is really on point. Also shows great skill. Lovely piece too. Earned my subscription.
Buy them. Personally I’m not skilled enough to make cuts into drawer faces that won’t allow dust to come into the drawer. I know I should practice but I never think about drawer pulls until I’m there about to need them
Yoooooo Shane!!! Freakin waiting for da interwebs to wake up & realize this Channel needs to be up over 100K subs bye now!!! Very cool build Bud!! And... da jokes NEVER disappoint!! Hoping all is well, Dirty Jersey out!!
I like to design and build them, keeping in mind that any furniture going into the house has at least one additional stakeholder that needs to be consulted. She often has an opinion about design details and carries two votes! Great work, sir. I'm all in for plans if you make them available.
First, Buy them. Second, I would love to see a video from you abut sharpening and maintaining your planes. I know there are a lot out there, but for some reason I think you'd do it better? :)
I have one about the sharpening set up I use but it doesn’t dive too deep into hand planes specifically. I’ll definitely keep that in mind for a future video though!
Nice work yet again. Good balance of talking vs video and a great balance of adding your personality and instruction. I have been looking forward to your new videos
Well done; intricate yet simple, casual yet elegant. Timing, delivery, all of it. Excellent jokes. The furniture is pretty good too. Re: Rubio hardener, I actually reached out to Rubio about this a while back. Instructions say to mix 3:1 oil to hardener but if you look at the containers, they give you more than 3x of the oil than they do the hardener. Their explanation was that some people don't always use the hardener, which is a dumb explanation because by not providing enough hardener they're forcing everyone to "not always use the hardener", but is an explanation nonetheless. It feels like a ripoff, but it's so good I keep buying it anyways.
In general, I like the looks of integrated pulls more than bought. Also, at least one of your jokes hits me every time way harder than it should every time. It was the tennis player one this time. 16:30. That was a good one. 😂😂😂 And since you mentioned this was for organizing your son's stuff in the description, Happy Father's Day good sir!
Nice. The reason you have more Rubio hardener is because they don't provide the proper amount to match their own directions in terms of the mix of A to B. It's mind blowing, but for whatever reason, there isn't enough B for A.
I like integrated pulls; however, I also like making my own pulls with a high contrast wood. For instance, I made some of my shop furniture with Radiata Pine and used Jarrah for drawer/door pulls. The trick was to make the pulls so they won't get caught on clothing as I walk by. Anyway, I really like this piece. The symmetry is definitely aesthetically pleasing and I feel those legs/feet compliment the piece nicely. 👌 I am also a sucker for push-to-open hardware and soft closing drawers. Well done, Shane!
@@TimberBiscuitWoodworks definitely. I feel the way you integrated the pulls in this piece works really well. I also learnt something new when watching your video. I didn't know the difference between a groove and a dado and have been using the terminology wrong all this time. So, thanks for that bit of information.
Pulls - it depends on the piece I'm doing, but generally I make my own. Great job on this, dude. I made something out of maple veneer ply and yeah... sooooooo thin. The oak veneer ply isn't much better, but it seems to withstand sanding better and blends better with solid wood. I don't have anywhere local to me for it, but you might look into getting cabinet-grade plywood next time. The veneer is much thicker, but then of course your wallet gets much thinner. Trade off?
Thank you! Yeah this was Pro Select maple which is why it is so surprising. I’ve used it on a few projects over the past year and this was by far the lowest quality. I have heard from quite a few people in the area that have the same experience.
I recently found your channel. Great videos. You have a lot of good things going for you. If I may suggest...a modest investment in better lighting would improve your videos dramatically. Also, feel free to ignore me! Keep up the good work.
Just a question on grooves and date's. You said a groove runs with the grain and a dato runs cross grain. When putting a groove or dato in plywood, how is that determined? Isn't plywood small sheets of wood with the grain going a different direction with each layer?
Combine? It depends on the piece though. Sometimes building a new handle has great reward too and is one that ends up being what sets the piece over the edge. But reality, I always have more part A as well. I tend to vary my finishes, but it's hard to argue with a good hardwax oil. I imagine that a team up of dad jokes "wood" be quite "plane". 👀
▸ SUBSCRIBE! bit.ly/3msp0Su
▸ Patreon: www.patreon.com/timberbiscuit
▸ Plan: Leave a comment if you'd like plans for this one
Yes to plans, please. I love this design.
Thank you! I’ll keep that in mind, and let you know if I end up making them.
Combine. It’s a work of art Shane and plans please! You have such a great sense for details. Happy Father’s Day!
Thanks man!
Definitely would love plans for this.
I have been getting a lot of requests the past two weeks on this one. So, I will try to get them together this week.
Tremendous - I would appreciate a set of plans! Thank you
Glad you enjoyed it, thanks!
Very stylish.
Thanks man!
Rockler recently came out with their own under mount drawer slides that are much cheaper and just as good of quality as Blum. You might try them and save yourself a few bucks. Blum is $41 for 21 inches at my local Rockler, their brand is $27 for the same length.
I’ll have to check them out. Unfortunately I don’t have a Rockler around where I live so I have to buy them online. My biggest gripe with Rocker is their return policy so I don’t order from them very often.
Gorgeous 🤩🥰
Thank you! Cheers!
I just came across your channel and really enjoyed this video. It's a perfect example of how after action narration limits any waste of time or verbosity. It also flows incredibly smoothly. Your explanations are great and the humour is really on point. Also shows great skill. Lovely piece too. Earned my subscription.
Thank you! I’m glad you enjoyed the video, and welcome to the channel.
Buy - though I don't mind integrated pulls, I tend to like actual handles better. I'm also fond of hand-made wooden pulls.
Can’t argue with you there I love wooden handles too
I would love a plan for this.
I will definitely keep that in mind
Wow. Impressive! Congratulations
Thanks! Glad you liked it
Nice build as always Shane! Happy Father's day!
Thanks so much!
You continue to amaze me!!!
Thank you so much!
great piece of work . plans would be nice 🙂
Thank you! This one is making a resurgence so plans might be coming soon.
Beautiful stuff big man
Greetings from Scotland 🏴
Thanks!
I love that your drawer pulls are smiling
“Happy trees,” as Bob Ross would say.
Buy them. Personally I’m not skilled enough to make cuts into drawer faces that won’t allow dust to come into the drawer. I know I should practice but I never think about drawer pulls until I’m there about to need them
Fair point, it’s not top of mind in the grand scheme of things.
Fabulous - please forward a set of plans !!!
Unfortunately, I didn’t get around to making the plan for this one as there wasn’t quite enough interest.
Yoooooo Shane!!! Freakin waiting for da interwebs to wake up & realize this Channel needs to be up over 100K subs bye now!!! Very cool build Bud!! And... da jokes NEVER disappoint!! Hoping all is well, Dirty Jersey out!!
I’m with ya there haha! Thank you as always for the positivity, it really means a lot.
Combine (or buy)! I feel like combining gives a cleaner look on modern pieces, but doing vintage style demands the appropriate hardware.
Great point!
Your work keeps getting better and better. Thanks for your content.
Glad you enjoy it!
Yes to plans!
I’ll add that to the tally
Buy and combine, really depends on the project. Well done, I used my CNC to build similar panels, love the look.
Thanks! Yeah, doing them on the CNC is a good option.
Thanks. You share a lot of great tips that many people overlook, and it's appreciated. Always chamfer your feet!
You’re most welcome! I try to sprinkle a little of everything in there to help the next guy. And you know it! 😀
You have become one of the top three builders I follow. I hope your channel really takes off. Your shop has come along nicely.
Sweet! Hopefully in some good company. And thank you very much!
Happy Fathers Day Timber Biscuit!😊
Thank you!
I like to design and build them, keeping in mind that any furniture going into the house has at least one additional stakeholder that needs to be consulted. She often has an opinion about design details and carries two votes!
Great work, sir. I'm all in for plans if you make them available.
Haha isn’t that the truth, luckily my wife and I share similar tastes. Thank you!
First, Buy them. Second, I would love to see a video from you abut sharpening and maintaining your planes. I know there are a lot out there, but for some reason I think you'd do it better? :)
I have one about the sharpening set up I use but it doesn’t dive too deep into hand planes specifically. I’ll definitely keep that in mind for a future video though!
Combine. Each design will call for a specific type of trim. Nice piece, like that mid century modern styling.
I’m with you there, and thank you! Cheers
Nice work yet again. Good balance of talking vs video and a great balance of adding your personality and instruction.
I have been looking forward to your new videos
I’m really happy to hear that! Thank you
Very nice build.
Thank you!
Your work always impress. 😃😃
I appreciate it!
25:40 It's ok to smile when having fun ;)
Haha, that too is a work in progress.
@@TimberBiscuitWoodworks haha, noice
Well done; intricate yet simple, casual yet elegant. Timing, delivery, all of it. Excellent jokes.
The furniture is pretty good too.
Re: Rubio hardener, I actually reached out to Rubio about this a while back. Instructions say to mix 3:1 oil to hardener but if you look at the containers, they give you more than 3x of the oil than they do the hardener. Their explanation was that some people don't always use the hardener, which is a dumb explanation because by not providing enough hardener they're forcing everyone to "not always use the hardener", but is an explanation nonetheless. It feels like a ripoff, but it's so good I keep buying it anyways.
Thanks for the feedback, and thanks for the insight! I’m happy to know I’m not crazy haha
In general, I like the looks of integrated pulls more than bought.
Also, at least one of your jokes hits me every time way harder than it should every time. It was the tennis player one this time. 16:30. That was a good one. 😂😂😂 And since you mentioned this was for organizing your son's stuff in the description, Happy Father's Day good sir!
Thanks man! I “loved” that one too 😂
@@TimberBiscuitWoodworks Oh man... I just set you up for that one. 😄
Nice. The reason you have more Rubio hardener is because they don't provide the proper amount to match their own directions in terms of the mix of A to B. It's mind blowing, but for whatever reason, there isn't enough B for A.
Thanks! Haha, yeah it’s an odd decision huh
Great job. Love the door details! Keep up the great projects and amazing jokes. 😂
Thank you, and you got it!
super et pratique !!!
Thank you!
I like integrated pulls; however, I also like making my own pulls with a high contrast wood. For instance, I made some of my shop furniture with Radiata Pine and used Jarrah for drawer/door pulls. The trick was to make the pulls so they won't get caught on clothing as I walk by.
Anyway, I really like this piece. The symmetry is definitely aesthetically pleasing and I feel those legs/feet compliment the piece nicely. 👌 I am also a sucker for push-to-open hardware and soft closing drawers. Well done, Shane!
Thank you! I’m with you on doing something to make them stand out. I think pull are often an afterthought, but they deserve some love.
@@TimberBiscuitWoodworks definitely. I feel the way you integrated the pulls in this piece works really well.
I also learnt something new when watching your video. I didn't know the difference between a groove and a dado and have been using the terminology wrong all this time. So, thanks for that bit of information.
Groovy! 😉
Combuy them....😊
I can get behind that haha
I bought stainless steel 1/2” 304 bar to make mine… so completely custom and hand made.
Nice!
This is really great man. I would be really interested in purchasing plans!
Thank you! I’ll keep you guys updated on the plans
thanks
No problem!
Always loved your content on r/woodworking, your videos are even better than I expected! happy to stumble across your channel.
Thanks man, welcome to the channel!
Excellent project! Can you give me the info on where to get the screw down table clamp? Thanks again!
Thank you! Which clamp are you referring to? If you mean the vice on the bench, that is the Bench Crafted leg vice.
Awesome build dude, the dad jokes are perfect for today. Plans would be sweet!
Haha for sure!!
@@TimberBiscuitWoodworks I came back to watch again. It's that good.
haha, good to hear!
Pulls - it depends on the piece I'm doing, but generally I make my own. Great job on this, dude. I made something out of maple veneer ply and yeah... sooooooo thin. The oak veneer ply isn't much better, but it seems to withstand sanding better and blends better with solid wood. I don't have anywhere local to me for it, but you might look into getting cabinet-grade plywood next time. The veneer is much thicker, but then of course your wallet gets much thinner. Trade off?
Thank you! Yeah this was Pro Select maple which is why it is so surprising. I’ve used it on a few projects over the past year and this was by far the lowest quality. I have heard from quite a few people in the area that have the same experience.
I recently found your channel. Great videos. You have a lot of good things going for you. If I may suggest...a modest investment in better lighting would improve your videos dramatically. Also, feel free to ignore me! Keep up the good work.
Thanks! Yeah I have a few studio lights in the shop but they are quite pricey so all in due time.
Looks amazing love the look of it great job
Thank you sir!
Can the three draws hold any paddywhacks?
Only if you're willing to give the dog a bone.
10:50 For a second I thought that you'll say "Because as we all know, the most stressful part of being a woodworker is to be married" 🤭
Haha! My wife might feel that way
Just a question on grooves and date's. You said a groove runs with the grain and a dato runs cross grain. When putting a groove or dato in plywood, how is that determined? Isn't plywood small sheets of wood with the grain going a different direction with each layer?
I usually go based off the face grain for plywood when describing the joint. But yeah, plywood is crisscrossed sheets.
Combine? It depends on the piece though. Sometimes building a new handle has great reward too and is one that ends up being what sets the piece over the edge.
But reality, I always have more part A as well. I tend to vary my finishes, but it's hard to argue with a good hardwax oil. I imagine that a team up of dad jokes "wood" be quite "plane". 👀
Haha, Solid response! I agree, it does depend on the project. And I am definitely going to be borrowing that joke.
Plans please
Oh man, it’s so close to happening. I’ll be sure to let you know if it does!
Buy... or build walnut pulls
Can’t go wrong with that
Combine them
I’m with ya there!
干活就干活，少量简洁的解说就好了。这样逼逼叨叨地没完没了，听得人脑浆子都沸腾了。
I mean if you don’t want the narration, just hit mute and play some of your own music my guy. It’s not that deep.