⚫️ Raw - Airbrushing a simple skull using AirShot templates.
Vložit
- čas přidán 5. 09. 2024
- Learn how to airbrush this skull artwork by using AirShot’s multi layered skull template.
For more artwork, courses and supplies visit us @
www.airbrushas...
For international sales please visit our Amazon Influencer page :
www.amazon.com...
To view our video explaining our Amazon Influencer page visit :
• Our NEW Amazon Influen...
great video, and as a new to airbrushing person, nice that you DIDN'T time-lapse most of it!, that shows GREAT respect to us newbies, that it is OK to go slow, it's not all about "secrets" and keeping everyone in wonder ( should not be like magic, KNOWING does not diminish the awe of it all! ) and besides it all shows how skilful you realy are as artists.
Many thanks for your comment and glad that you enjoyed the video and that you particularly like that I try my best to show as much as possible in real time, I am happy to hear that this helped you out and you really found the video informative. All the best 👍🏻👍🏻
That looks great 👍!!
I bought a bunch of stuff using your affiliate links. I’ve been watching your videos like crazy. Going to get my first airbrushes next week in the mail. Super stoked to see what I can do.
Being new to airbrush I really appreciate the "easier" projects. I think it looks increatible. Whatever the level of experience needed to complete a project, I think all your videos are helpful. Rock on bro!
Thanks you glad you enjoyed the video 👍🏼
greetings from Belgium,
love your work
Just want to thank you...your videos have really helped my painting come along
Thank you Carston for the tutorial's. As a newcomer to airbrushing I find great value in your video's.
No problem, appreciate the comment and feedback all the best with your airbrushing 👍🏼
Another great video. Thank you again for sharing your talent and knowledge. I am one of those people who learn best from seeing something done and I appreciate that you stay in real time and explain as you go. A lot of people speed the video up and I end up learning nothing. Keep up the good work, mate!
I love your channel.i draw with pencil .I'm not bad .I just bought my first airbrush watching n learning what I can! Thank you.
These are beautiful in January I’m having total knee replacement left when I’m off work I will have more time to practice airbrush but I’m using it to touch up equipment hear at work and used it on my truck to learn how they spray I have Iwata eclipse and nova both have same needle and spray different.
Very Good skull.
Thank you glad you enjoyed the video and like the artwork 🙌🏻👌🏻
Great job. Thanks for the videos. I’m new at airbrushing, haven’t tried my brushes yet but trying to watch tutorials. Definitely love your videos.
Thank you appreciate it 👍🏼
You did an outstanding job, for a quick template, design . Hope to see more of your work.
I've found that neodymium magnets work well to hold down the stencils, if you can get one on top and one under it to clamp it down. Awesome channel 👍👍
Fantastic thanks for the tips and appreciate the kind words re the channel 👍🏻
I love your vids and learning so much
Keep em coming Carsten ,great work !!!!
Thanks Frank glad you are loving the vids 👍🏼
Simply stunning
Hey mate, great video as always! Just a small little pointer, the human skull has 4 quadrants of teeth, in the configuration of 2-1-2-3. 2 Incisors, 1 canine, 2 pre-molars and 3 molars..it just looks like on your skull there are just a few too many teeth! Unless this is some sort of mutant skull then don't worry about it! ;-)
Yep, lol...great spotting but this was by no means intended to be based on a realistic skull so let’s just say he is 50% human and 50% mutant 😜 thanks and appreciate the comment 👍🏼
No worries mate, still love this channel and checking daily for new content!
Hello Oz nicely done that is a good looking skull under an hour that’s cool, We can all have shop class and have a friend or two that would like to know how to airbrush this
Skull would be awesome.🕶
Hey mate thanks for your comment and glad you like the skull and found the video helpful 🙏🏻💀
Amazing and especially how quick and easy you make it look so much so I have ordered some templates to have a go at it, always up for learning a new skill.
Many thanks glad you found it helpful 👍🏼
hell yah brotha finally a question geared tward my pay grade .... and yes here in the states we call it a........ Q-tip!!!! but seriously love your advice and knowledge to helping me become a bad ass airbrush dude. wish you were in the states or i was over yonder to take your classes. thx
Thanks for your comment, we are hoping to soon have ‘pay to download’ videos focusing on our one day course available so that everyone worldwide can take our classes...we will still offer our free videos however the pay to download will be better quality and much more in depth tuition 👍🏼
KOOL TUTORIAL AND STEP BY STEP
ON HOW TO.... 👍🏼 .....
Many thanks glad you enjoyed it 👍🏼
nice job you make it look so easy hope to be good but you will allwas be the man ...bless you a and family
Awesome upload ! Thank you for sharing 😁😁
No probs glad you enjoyed it and thanks for the comment
Very helpful video thanks!
Amazing channel this! Thanks! Just what I need as a n00b 👍🏽
No probs thank you for your comment glad you enjoy the channel and find our videos helpful 👍🏻
Excellent tutorial!!! Thank you!
No probs and thank you glad you enjoyed it 👍🏼
Awesome tutorial!! I’m a newbie and love your channel ☺️
Thank you and really glad you enjoyed the video and found it helpful 🙏🏻
@9:46 Don't make excuses. LoL Great vid . Thanks!
Lol thanks for the comment 👍🏼👌🏻
This looks astounding! Can't sit tight to watch similar to this. Great job.
Thank you 👍🏼
Hello. I just subbed to your channel. I was an art major in high school and I would love to get back into the airbrush scene. Live the template idea and live the free hand technique combined.
Thanks appreciate the comment and welcome to the Airbrush Asylum community 😜👍🏼
Looks real cool
Thank you 😜
Dear Sir: Thank you so much for presenting your Airbrush Skills on CZcams. The first time I seen and Airbrush was at the "World Of Wheel" 1980's Washing DC. A guy had an Airbrush booth whom could Airbrush anything realistically. You stepped into his booth with a Polaroid of your car and girl, then this man made magic with his airbrush. He could take the ugliest car and woman and make them look like gods on the T-Shirt he airbrushed. I was like I can lean to Airbrush. Yea that did not happen because back in the 70's- 90's no one gave up their Airbrush secrets. Believe it or not, people would take your life for your airbrush secrets back then. I was making Ghostbuster Slimmer T-shirts back then and I had 3 guys approach me at my stand and told me if I do another it would cost me and my family their lives. Thank God for the Internet Sir and your Videos today. I will bring my brushes out of the dark to enlighten the future if you will help me teach a new generation of Airbrushes. Love Turbo
Cheers thank you for your story and compliments on my work and channel , cheers 👍🏻
Good job mate....
Many thanks glad you enjoyed it 👌🏻
23 theeth 25 26 .damn how many teeth does this skull have .thats the left side the skull .wow . props on the detail work . your bottom jaw structure is off . but which throws your skull off .sorry keeping it real .but i enjoyed watching your video.ty
Lol 😂 yep I know my Alien skull ...the template had approx 10 per row and I think from memory I added another 1 to 2 p/ row . Maybe I should rename the vid ‘teeth tutorial’ appreciate you enjoying the video regardless cheers 👍🏻😉
hey guys, been awhile since i seen y'all, love this stencil, John from across the pond
Thanks John, great to hear from you and all the very best from Oz...👍🏼
Thanks ...you have skill hands, I will learn from you .
Thank you
Thank you so much! I Have picked up some nice tips and things to use
Awesome glad you found it helpful thanks for your comment 👍🏻😉
Cool mate very cool
Thank you sir 😜👍🏼
great to watch.....learning lots from you tutorials....thank you.
Thanks glad you enjoyed it 👍🏼
Where did you find the skull set? Awesome video learned some new things for ideas on skulls. Great work!
love your skills big fan
Thanks appreciate it 👍🏼
Very nice and a great tutorial.
Thank you 👍🏼
How do you prep your services? Also prep and finiish over clear coat.
Actually a first I've heard someone call burnt umber by its "scientific name" or what ever paint charts go by like plants with common and Latin names! Love burnt umber myself love it for creating a base layer for working artificial rust!
Why do these skulls all have perfect teeth? Surely it would add to the effect to have a couple missing?
Yes, agreed check out this vid of mine showing you some damaged teeth czcams.com/video/r-kjmaBLUx4/video.html 👍🏻🤘🏻💀
Artistic license really! You wouldn't want a buckled tooth goofy skull on your tank or whatever really! However funny as heck that would be to see lol
Me parece que tiene demasiadas muelas, en total son 38 piezas incluidas las Cordales, por lo demás Exelente!
This skull has A LOT of teeth. It reminds me of Francis Dollarhyde's dentures.
Lol, yep I think I went a little ‘tooth crazy’ 😜
Q Tip is correct for the lower 48, no idea what they call them in Alaska, they have a different word for everything.
Lol....👍🏼👍🏼
Got a question how would it look if you did it in ink? Im a newbie but was thinking about ink work or is paint better thanks for any information you could share i can watch theses videos all day so thank you
What causes your airbrush to squeak? Are you cleaning off the tip? Thanks lots of great tips You Are Awesome, Mate!
That’s me ‘back bubbling’ therefore putting my fingers over the aircap and pulling back in the trigger to reverse the air pressure to dislodge any dried paint 👍🏼 glad you liked the video
I am new to airbrushing, and really enjoying your videos. Can you clarify for me, are you primarily using .50 needle for the majority of the painting and switching to .35 for the fine final details??
Hi there and thanks for your feedback and glad you are enjoying our videos. For general airbrushing I tend to use either a 0.3 or 0.35mm brush and for detailing I use a 0.23 or 0.18mm hope that helps . 👍🏼
Brilliant as usual Carsten. Thank you, really value your help. With blueing on white highlights is a good work round to add a couple of drops of the sepia or flesh tone before applying the white highlight? I just wondered if it would stop the white being able to flip to the blue side and keep it in the natural tones spectrum?
Good question Phil, not 100% if that would work and totally stop the blue shift as this generally happens when the white goes over these darker tones, worth a try though. Appreciate your comment hope this has somewhat helped 👍🏼
I am interested in purchasing a airbrush kit please can you recommend one never used one before, great work on video mate greetings from Spain
Hi there you could check out the iwata HPCS eclipse great all round brush that you will have for years and years feel free to check out more info by visiting the following ‘affiliate link’ amzn.to/2MNXoGg you can also get a iwata IS875 compressor which can be viewed by visiting this ‘affiliate’ link amzn.to/2NKfRDf (this one comes with a HPCP airbrush) hope that helps 👌🏻👍🏻
@@AirbrushAsylum o o should've probably asked them if they're a beginner or not before popping those links. I would just get a reasonable cheap compressor with a moisture trap, if it doesn't have one, get an inline moisture trap for the hose and the Iwata Neo if they are a beginner, that way they don't spend too much money at first and if they enjoy it and get a nice flow, could then upgrade to the Eclipse. Iwata's are like the ferrari's of the airbrushing world.
Great video really helpful what paint do you use when spraying bikes
I use Trident waterbased airbrush colours sealed with a 2 pack clear. You can purchase them from dna-paints.com as they ship internationally if you are local then we sell them on our site airbrushasylum.com.au cheers 👍🏻
Excellent video yet again.. I have a question though. Does using the spray adhesive on the back of the stencil not cause contamination when it comes to shooting over the job with a clear coat at completion. Thanks
Thanks appreciate the comment, good point this is purely a sample panel, I don’t use spray adhesive for any curved surfaces such as harley tanks, I usually cut my own paper templates or curve my Mylar temples and use my fingers (on the template) to keep it in place when spraying .
En este aerógrafo donde esta la copa para la pintura o donde pones la pintura
What air pressures you using for each brush? I'm assuming you're using .3+ and .18+ tip brushes.
Are those paints milk thin consistency?
Also, what paint set are you using? Would like to do some skulls myself.
Thanks in advance
Hi there thanks for your comment take a look at this recent video that I did which should answer your question :
czcams.com/video/iipihxzoZTc/video.html
Ill tell you what, you dont like using stencils so ill help you out, send me all the stencils you dont want or you dont use. Lol i cant afford good stencils id love to have bunch of stencils especially skulls reapers true flames and those awesome texture stencils you use lol. You do AMAZING work. I hope someday to be half as good as you are. Thank you for making these vids.
Thank you and I’ll keep it in mind 😂 glad you enjoyed the tutorial, all the best 👍🏻
What airbrush are you using
Nice video. What airbrush and tip size were you using and what amount did you reduce the paint, it any ?
What airbrushs to use
Can u show how to do a punisher skull as I'm new to air brushing and I got the stuff would like tyo see how done . Uk
Just find the punisher skull make a paper template then use this video to guide you on how to render that particular skull 👍🏻👊🏻
where did you get the stencil from you do great work love watching you
Visit airshotstencils.com it’s available through them 👍🏼
@@AirbrushAsylum thank you for your timely response
Does you replace or change the cup colour when you get to other colors ?
Where can we get trident paint from can’t find anyone in Uk who stock it I’m only just starting airbrushing thanks to you
They ship worldwide if you go direct to their site visit them at dna-paints.com 👍🏻
wonderful work and fabulous tutorial. Just a little remark - I count 13 teeth on top and 14 on bottom. As it's a side view it would give a total of 54 teeth were it should be maximum 32 teeth on an adult. Don't be mad at me, just made the remark because I'm learning to and I think it's important to be aware of some importante details. Aside from that, thank you cause I've just learn a lot from your video.
Lol, yep I hear ya...from memory I think I just got caught up with the template and painting tooth after tooth, even though it’s not 100% accurate I am glad you still found it informative . Cheers 👍🏼
Are you serious? Have you completely missed what this fabulous tutorial is about or are you too busy counting teeth? I think the most important lesson you can walk away from here is the “ARTIST” is always the boss of their canvas, not the other way around. If he wanted 154 teeth on his skull thats OK!
Sa Cortes this skull is Alien.🕶
Who makes the stencils .?
Stencils are made by AirShot visit them at airshotstencils.com 👍🏻😉
Great vid could u name the colours u used please
I will try and find the time to go back to some of my older vids and list the colours thanks for your comment 👍🏼
awsome vid Mate
Thanks glad you like it 👍🏼
Hi AA, please put webpages to the stencils you use or get. Thank you
Thanks for your comment visit airshotstencils.com 👍🏻
@@AirbrushAsylum Thank you AA for the webpage
This video was perfect for me cuz I just got a skull stencil with the same thing all the positive n negative stencils, what do u mix ur paint with reducer n what ratio 1 to 1?
Glad it’s helpful for you and have fun with your templates, there is really no set ratio as it depends on brand of paint, air pressure and personal preference, I usually work with approximately 30% paint and 70% reducer 👍🏼
vc manda muito bem
I looked on the link and couldn't find this template, any suggestions
Visit airshotstencils.com and use promo code Airbrush Asylum for 10% off 👌🏻
Q-Tips aka Cotton Swaps in the States
Lol, yep Cotton buds here in Oz 👌🏻👍🏻
Hi can you please tell me where your shop is in melbourne love to come and have lessons thanks Paul
We are located in Carrum Downs feel free to email us at airbrushasylum@me.com and we can help you from there . 👍🏼
Awsome skull, where can I get that stencil ?
Hey there thank you it’s available from www.airshotstencils.com 👍🏼
where do u purchase your mediums from mate? meaning on what u spray on?
The composite panel is from sign supply shops just find one in your local area and they should be able to help 👍🏼
Where can I purchase this skull stencil???amazing work!!!
Thanks for your comment this template is available from : www.airshotstencils.com 👍🏼
Airbrush Asylum thank you very much. Really appreciate it
Hello sir
I’m living in Melbourne Aus and I’m looking for Air brush class.
Need your advice.
Thanks
Hi Ali no probs happy to help we have classes both beginner and intermediate / advanced classes kicking off in April visit the following link for more info or to book :
www.airbrushasylum.com.au/courses.html
Hope that helps 👌🏻
Show de bola
When you gonna upload some Freehand style ?
Thanks for your comment, we have done a stack of videos on freehand airbrushing and we will go back to that once we have finished reviewing and testing these templates which were sent to us by AirShot, thanks appreciate your comment 👍🏼
How big are the panels you do the art work on?
This panel is a little larger than A4, hope that helps 👍🏼
Teeth don't go that far back on your head or jaw bone and you have way too many teeth in this guys head anyway..lol You asked for comments so I gave you one...lol However as for your airbrushing , I did in fact learn some tech tips thanks!!!
Many thanks and yes, I agree...too many teeth but I am glad that it helped you regardless 🙏🏻
Heres the three layered template featured in this video airshotstencils.com/collections/frontpage/products/skull-12
When you started with the 1st template what are you spraying the paint on
Larry Kelley greetings Larry aluminum plates that was prepped.🕶
waterbased or urethane? the ammount of times you get a clogged tip id say waterbased :D
Yes this one is using waterbased paints 👍🏻
That's way too much teeth that's like 30 teeth on one side of skull we only have 32 total
😮
Qtips
Or cotton buds lol 😂
Зачем столько зубов? ))
ну пойдёт
What is your P.S.I?
10 minutes in, 4 ads.
Зубов не слишком много у черепа? )))
Looks great bud. But...to many teeth. Accounting for the side we can't see that dude has like 60 teeth in his head.....?
GOOD JOB, BUT... TOO MUCH ADVERTISING!!
Entirely too many teeth.