How to enter hidden menu in Ford Mondeo MK3 (service mode, gauges self-test, needle sweep)
Vložit
- čas přidán 10. 06. 2014
- In Ford Mondeo MK3 hidden menu you can test instrument cluster gauges (needle sweep), LCDs, LEDs, read diagnostic trouble codes (DTC) and check values of multiple sensors like: vehicle speed, engine speed, coolant temperature, battery voltage and more..
You don't need to visit dealer or use expensive diagnostic tools to check basic engine and sensor parameters int your Ford Mondeo MK3 car.
Just press and hold trip reset button, then turn the ignition on. Release the button when "TEST" appears on the display.
More at: mr-fix.info/ford-mondeo-mk3-hi...
Music by Dan-O at DanoSongs.com - Auta a dopravní prostředky
Mate, perfect video. I used to recent a random EML that came on, as you say no need for a fault reader. Thank you so much
No problem.
But please notice that most likely you'll find DTC codes for faults that are related (directly or not) to the Instrument Cluster. Like bad battery (voltage drops at start) etc.
You can also but really cheap ELM327 bluetooth scanner that will read faults from ECU.
mr-fix in my case I had just cleaned the egr valve and the electric plug was not fully on, so I think the car thought it wasn't there.
This could just about save my life lol,cheers
Thank you verry much.
Hi,how can i remove the front panel control Air vents couse i whant to paint only that 2 plastic grid....i dont know If it have clamps or screws.Thank You.
Great video thanks, when doing the bulb test are all bulbs on the dash supposed to light up think my windscreen washer 1 does not work
All should light up.
Hi, it looks at me (f 182), what would that mean in liters?
I found interesting how Air Bag light - does not light up - in Bubble test - but it works actually ! ;)
Hi just done and now wont come out test mode it just says test when i start the car 2002 mondeo mk3 please help
That's great,where can I get a list of what each fault code does, and means? Thanks
+joeguinness1759 i want that too :)
+joeguinness1759 I want that three!
GAGE - test des jauges (balayage à l’aiguille)
8888 - Test des segments LCD
BULb - test ampoules/LED
r_22 - version ROM du module
E001 - module version NVM
dTC - liste des DTC. « AUCUN » s'il n'y a pas de DTC.
000,0 - vitesse actuelle (MPH)
000,0 - vitesse actuelle (km/h)
???? - inconnu
0000 - régime moteur (RPM)
000.t - Wartość nieopisana.
F.000 - signal du capteur de niveau de carburant
L.000 - lecture stable du capteur de niveau de carburant (l)
000.F - lecture stable du capteur de niveau de carburant (HEX)
000.C - température moteur (C)
000.C - température du collant (C)
b000 - tension de la batterie
Ab-L - indicateur ABS. Ab-H signifie indicateur allumé.
Eb-L - indicateur EBD. Eb-H signifie indicateur allumé.
IL-H - éclairage du combiné d'instruments. H - Élevé, L - Faible.
Cr-H - inconnu
A-00 - inconnu
B-09 - inconnu
C-D1 - inconnu
D-3B - inconnu
0000 - inconnu
1255 - inconnu
2016 - inconnu
3255 - inconnu
4000 - inconnu
5000 - inconnu
6000 - inconnu
7000 - inconnu
P115 - inconnu
P2FF - inconnu
P3FF - inconnu
P4FF - inconnu
What does it mean er 0209
how do you make the small display on the left say km of gas left instead of the temperature???
On mine you press the small button on the end of the left hand stalk
Need list of what the faults mean. Thanks
GAGE - test des jauges (balayage à l’aiguille)
8888 - Test des segments LCD
BULb - test ampoules/LED
r_22 - version ROM du module
E001 - module version NVM
dTC - liste des DTC. « AUCUN » s'il n'y a pas de DTC.
000,0 - vitesse actuelle (MPH)
000,0 - vitesse actuelle (km/h)
???? - inconnu
0000 - régime moteur (RPM)
000.t - Wartość nieopisana.
F.000 - signal du capteur de niveau de carburant
L.000 - lecture stable du capteur de niveau de carburant (l)
000.F - lecture stable du capteur de niveau de carburant (HEX)
000.C - température moteur (C)
000.C - température du collant (C)
b000 - tension de la batterie
Ab-L - indicateur ABS. Ab-H signifie indicateur allumé.
Eb-L - indicateur EBD. Eb-H signifie indicateur allumé.
IL-H - éclairage du combiné d'instruments. H - Élevé, L - Faible.
Cr-H - inconnu
A-00 - inconnu
B-09 - inconnu
C-D1 - inconnu
D-3B - inconnu
0000 - inconnu
1255 - inconnu
2016 - inconnu
3255 - inconnu
4000 - inconnu
5000 - inconnu
6000 - inconnu
7000 - inconnu
P115 - inconnu
P2FF - inconnu
P3FF - inconnu
P4FF - inconnu
hello, it is possible to see info consume as fuel instead of how many degrees it's outside without the info button on the signal lever? thank you!
Only if you enable trip computer in your car.
You need Ford diagnostic interface to do so.
And in all cars it can be done.
There's a thing you can also do by holding in the rear demister button.
yeah, that's a GEM input/output test.
I’ve done that how do you exit it,as it just beeps when I put my demisters on now
@@mrfixplwhat's gem
hey my car done this the other day for no reason and would not start any ideas??
Hi, do you know what 560020 means ?
It may be the real number of Km's of the car ?
Sergiu my car shows the same number, only last digit is 9
No my car is a same 560032 i think this is not km
Hello Can i turn OFF ABS lampe
When you fix the fault the ABS indicator will most likely go off by itself.
fix the fault and the bulb will go out by itself... that or remove the bulb. Then take it to your nearest police station and hand them the offending light!