How To Repair A BLOWN Speaker - English LER

Sdílet
Vložit
  • čas přidán 3. 08. 2021
  • Learn Electronics Repair #104
    How to repair a blown speaker.
    In this video we look at two speakers - a tweeter horn and a woofer / subwoofer. Boh the speakers have blown and read open circuit
    So can they be repaired? Watch to find out...
    I work in collaboration with:
    The Electronics Channel (live streams with Carlos and Detlef)
    / @theelectronicschannel
    Gran Canaria Uncovered
    / @grancanariauncovered (with Detlef and Julie. Not electronics related)
    Det Builds Stuff - / @detbuildsstuff8128 (Detlef)
    Retro Upgrade - / @retroupgrade (Carlos)
    For All Your PCB needs: free $5 discount coupon
    www.pcbway.com/setinvite.aspx...
    Equipment used in my videos. These are affiliate links, you pay the normal price and I make a small commission.
    TEST METERS
    Aneng AN8009
    s.click.aliexpress.com/e/_DdW...
    amzn.to/469ZgOS
    www.banggood.com/custlink/mD3...
    KM601
    s.click.aliexpress.com/e/_DBw...
    www.banggood.com/custlink/KD3...
    VC480C+
    s.click.aliexpress.com/e/_DEY...
    amzn.to/3Q3LEz7
    amzn.to/46tmNdo
    MESR-100 ESR METER
    amzn.to/3tiy8hK
    amzn.to/3RwvejK
    s.click.aliexpress.com/e/_Dmi...
    XC6013L CAPACITOR METER
    s.click.aliexpress.com/e/_DmX...
    amzn.to/3t71Nul
    amzn.to/3LDdcbO
    TM-902C TEMPERATURE METER
    s.click.aliexpress.com/e/_Dm9...
    amzn.to/3LFzERv
    amzn.to/3PTwuvW
    LCR-T4 LOW COST COMPONENT ANALYZER
    s.click.aliexpress.com/e/_Dmq...
    www.banggood.com/custlink/KKK...
    amzn.to/46uzV1R
    amzn.to/3RHsmAN
    FNB58 USB ANALYZER
    s.click.aliexpress.com/e/_Dmd...
    amzn.to/3tb1QW8
    amzn.to/46oMn30
    www.banggood.com/custlink/mKm...
    PCI POST ANALYZER
    s.click.aliexpress.com/e/_DBs...
    amzn.to/46m9Gep
    TL460S Plus PCI_E ANALYZER
    s.click.aliexpress.com/e/_DnB...
    amzn.to/3ZERvOs
    TOOLTOP ET829 SCOPE METER
    s.click.aliexpress.com/e/_DBw...
    www.banggood.com/custlink/KGv...
    MULTIMETER PROBE KIT KET05
    s.click.aliexpress.com/e/_DE7...
    OSCILLOSCOPES
    FNIRSI 1014D
    s.click.aliexpress.com/e/_DEz...
    amzn.to/3RxMFk1
    www.banggood.com/custlink/KKG...
    FNIRSI DSO-TC3
    s.click.aliexpress.com/e/_DC8...
    amzn.to/3RBsgdS
    www.banggood.com/custlink/Gm3...
    FNIRSI DPOX180H
    s.click.aliexpress.com/e/_DBX...
    amzn.to/468oooT
    www.banggood.com/custlink/GGG...
    BENCH PSU
    NPS3010W
    s.click.aliexpress.com/e/_DDP...
    amzn.to/3rxsuIf
    www.banggood.com/custlink/3DD...
    SOLDERING
    T12 Station with M8 9501 Handle
    s.click.aliexpress.com/e/_DFV...
    amzn.to/3FdG8Ul
    M8 9501 HANDLE
    s.click.aliexpress.com/e/_De0...
    T12-BC3 Tip
    s.click.aliexpress.com/e/_DeN...
    amzn.to/3EUFpqQ
    amzn.to/3PB8axw
    SUGON T26D
    s.click.aliexpress.com/e/_DFx...
    QUICK 861DW
    s.click.aliexpress.com/e/_DDo...
    amzn.to/3PBOKZH
    amzn.to/3RCSqNh
    PROS'KIT SS-331H
    s.click.aliexpress.com/e/_DDo...
    SS-331H Spare Parts
    www.aliexpress.com/item/40002...
    THERMAL CAMERA
    Infiray P2 Pro
    s.click.aliexpress.com/e/_Dmu...
    amzn.to/457PgEb
    www.banggood.com/custlink/DDG...
    MICROSCOPES
    Amscope Optical Microscope (copy)
    s.click.aliexpress.com/e/_Dlh...
    uk.banggood.com/custlink/mKGy...
    amzn.to/4675Qp0
    amzn.to/459uvrY
    ANDONSTAR AD407
    s.click.aliexpress.com/e/_Dl4...
    amzn.to/3PSQKxJ
    amzn.to/48sxej4
    EEPROM Programming
    TL866 II+
    s.click.aliexpress.com/e/_Dls...
    amzn.to/3RTCRB9
    amzn.to/3LDu3Lu
    CH341A
    s.click.aliexpress.com/e/_Dk0...
    amzn.to/48IZiir
    1.8V ADAPTER
    s.click.aliexpress.com/e/_Dci...
    CONSUMABLES
    NC-559-ASM FLUX
    s.click.aliexpress.com/e/_Dda...
    DESOLDER BRAID (I use size 8045)
    s.click.aliexpress.com/e/_Dl5...
    s.click.aliexpress.com/e/_DFJ...
    MECHANIC HX-T100 Solder 63:37 (I use 0.6mm)
    s.click.aliexpress.com/e/_DeZ...
    ESD-11 TWEEZERS
    s.click.aliexpress.com/e/_DCZ...
    amzn.to/3PVfO7e
    Learn Electronics Repair is now on Discord! Come and join the fun, it's free.
    / discord
    If you would like to support this channel
    You can send donations
    www.paypal.com/paypalme/youtu...
    You can subscribe to Patreon
    / learnelectronicsrepair
    You can click Join to become a channel member
    Thank you
    Richard

Komentáře • 16

  • @LearnElectronicsRepair
    @LearnElectronicsRepair  Před 3 lety +3

    15 mins: Don't be daft Richard, you won't get any sound out of the speaker without the magnet attached!

    • @uksuperrascal
      @uksuperrascal Před rokem

      I was going to say you need the magnet attached to get the coil to move, but you beat me to it LOL.

  • @cdnsoundguy
    @cdnsoundguy Před 2 lety +3

    Great video. A couple humble observations, the diaphragm material is titanium, and clearly this HF driver was overpowered. The break in the wire occurs usually where ever the wire is stressed the most by movement and as a result has a slightly higher resistance so is it breaks there first. Also at 12:35 as you are scrapping the enamel off the voice coil wire, you can clearly see that the mechanical connection from the voice coil former to the diaphragm has failed. The adhesive probably failed due to prolonged over heating and cooling. Very hard to repair and expect same frequency response. By adding any additional weight to the diaphragm you change the Fs (resonant freq). etc etc. While on the road, I have had to make repairs like this, but only to get through some shows before we could replace the diaphragm or driver.
    I love you videos, please keep up the great work !!

  • @gordthor5351
    @gordthor5351 Před rokem

    Richard, I realize this video is old, but I just want to make a suggestion that might help you in the future. Over time these big heavy drivers tend to sag causing the voice coil to move off center (it looked like one side of the coil was rubbing, or very close), thus if you make a reference mark before gluing on the dust cap, the driver can be installed with the tightest gap around the coil oriented to the top and let gravity do it's thing to center the driver.

  • @IanCoomer
    @IanCoomer Před 5 měsíci

    I'd recognise that accent anywhere, where in Stoke on Trent, do you hail from my fellow potteries brethren? Longton/Blurton is the stomping ground of my youth, then briefly moving to Liverpool for 18 months. Before permanently relocating to Walsall, just a few miles south of Birmingham.

  • @jamesmurphy3347
    @jamesmurphy3347 Před 4 měsíci

    That's probably a 1/4 inch sae. The unmarked is a 1/4 inch bit driver

  • @Xorat
    @Xorat Před 3 lety

    Great video, fixing something else then computer Parts cam also be preety interesting. I am really interested how long a fix like that will survive on the battlefield. Could be a day or maybe until something else brakes.
    As always great job Richard!

    • @LearnElectronicsRepair
      @LearnElectronicsRepair  Před 3 lety +2

      A few years ago in the UK I was running a mobile disco. Called 'Dicky's Disco' beleive it or not. I did a repair the same as on the woofer here on two Peavey Black Widow 15" cabs (I was given for free by a pub/music bar popular with students, near the uni) ) and they were still working fine a couple years later when I left the UK and sold everything. Being mobile the speakers work very hard and get thrown around in vans a lot too and I gave them some welly for sure!
      The tweeter repair I have no idea - I never tried to fix a compression driver before.
      Of course previous results do not mean these will keep working. As I mentioned in the video I'm pretty confident on the subwoofer.
      The guy is picking them up tomorrow - let's see what happens

    • @LearnElectronicsRepair
      @LearnElectronicsRepair  Před 3 lety +1

      Oh WOW I just remembered there is some video of Dicky's Disco on youtube! czcams.com/video/q4dSUj3z7EA/video.html Those were good times! You can hear those Black Widows!!!

    • @Xorat
      @Xorat Před 3 lety

      @@LearnElectronicsRepair haha looks great, well only time will tell how long they will last.

  • @Dutch_off_grid_homesteading

    Heya nice speaker repair I think I can do that ?! maybe lol

  • @mattfowler8918
    @mattfowler8918 Před 2 lety

    Just a guess but would say epoxy and solder on hf diaphragm might make a serious impact to the frequency response.... Love your fix anything attitude but I'd probably drop $50 on a set of 4 replacements and do all the compression drivers in the bar so everything is matching and hes got a couple spares on the shelf for next time :)

    • @LearnElectronicsRepair
      @LearnElectronicsRepair  Před 2 lety

      TBH they never came back, they are using them in an Irish pub in Puerto Rico. That's not Puerto Rico the Caribbean island, it's the resort town in the south of Gran Canaria of the same name 😉

  • @jamesmurphy3347
    @jamesmurphy3347 Před 4 měsíci

    FYI 1/4 does not convert 6.5 is the closest. 10mm does not convert .... its between 10 and 11 or maybe 9 an 10 but it does not convert.
    Just trying to be helpfully informative 😊

  • @FilmForger
    @FilmForger Před 6 měsíci

    My speakers make that noise u did at 18:20
    But u skimmed over and mumbled something about it.... what was it?
    Are my speakers toast?
    They play... but make that rattle sound with medium to high bass... thanks

  • @weerobot
    @weerobot Před 2 lety +1

    Played too much Village People...