Shaping My Soft Top into a Fiberglass Surfboard & Surfing it!
Vložit
- čas přidán 26. 12. 2020
- This video is a straight up dream come true for me. The world's first ever soft top turned fiberglass surfboard! I contacted Brian Wynn about 3 years ago to pitch this idea, it took until now for us to find the time, but shaping my signature soft top into a fiberglass surfboard is one of the coolest things I've ever done. The coolest thing about surfing is that there are seemingly no limits to the creativity that you can put into it. The more of a creative approach I put into my surfing & vlog videos it seems the more I personally get out of this experience. Massive thanks to Brian Wynn for the help on this epic project! Thanks for the stoke NUB NATION!! - Ben
Wynn Surfboards - www.wynnsurfboards.com/
Clothes & Accessories: www.wavebandit.com/collection...
Wetsuits: hyperflexusa.com/categories/b...
Soft Top Surfboards: www.wavebandit.com/collection...
Fiberglass Surfboards: www.superbranded.com/collecti...
Skateboards: www.sector9.com/blogs/surf/be...
Music / bengravy
Music in this VLOG:
Allergy Season
Guustavv
Shuffled Up
Ballpoint
Possum' Popcorn
Guustavv
Lost Now Found
Guustavv
Move Your Hands
Dusty Decks
Booked
Dylan Sitts
Can't Chill
Dylan Sitts
Centaurus
Sarah, the Illstrumentalist
Gemini Pollux
Sarah, the Illstrumentalist
Perdula
Justnormal - Zábava
![Surfboard Shaping & Glassing [High-Performance Shortboard]](http://i.ytimg.com/vi/rYYuDt8Z2cY/mqdefault.jpg)
I was stationed in Gtmo Cuba when I was in the Navy and the only board to buy was a soft bottom and top board that I bought and was extremely slow . There were a handful of fiberglass boards on the base that dependent kids occupied . I was able to get a beat up fiberglass board that was on its last leg . I bought some resin , cloth and red pigment and reglassed the board not knowing anything on how to do ( no youtube in the early 80s ). I did ok but it was a bit heavy as I used allot of glass . It was buoyant and gave me the opportunity to gain some speed and control in the relatively inconsistent wind swell of the beaches on base. I gave the board to a kid to learn on when I left and it remain in Cuba .I was given my first dewey weber surfboard when I was stationed in buxton NC on hatteras where I learned how to surf and I got to pay it forward . This was the first and last time I did that( nasty job and I gained a lot of respect for board shapers ) . Well done Ben Gravy . Anything is possible if you put your mind to it
YES! I love it, thanks for sharing
Such a cool idea! Dare we say a “novelty” board?!🤘🏻🤘🏻
haha yes!
Ok comment #2. That thing seemed to kick start your style into overdrive. It looked like you were having a blast on it even in sub par conditions. Sic.
Brian Wynn's the best and a great guy for taking on a super difficult and time consuming rebuild like this. He could have built 10 boards from scratch with the same effort put into this one. 🤙 They all work...
No doubt one of the coolest things I have ever seen. Recycling at it's very best!!!
truth!
Ben you're crushing the Holiday content! This video is unique to the usual, thanks for a banger video while enjoying vacation 🍍I love the out there ideas like this. Mad props to Wynn for sharing his knowledge not only with you but with all nub nation.
Thanks so much!!
Collectors item!! 1 of 1. Classic that board is having longest run ever!!
Raw BEEEEEFS!!
10k & it's yours!
Likes?! Hell yeah! This vlog definitely needs more likes per viewers. Respect the man’s time and energy Fam!!!
Love you beefs
With all those phenomenal rc surfer vids, he’s fs got 10k for her;)
“Novelty” boards wouldn’t be a bad idea
truth!
Been saying it for a bit, Ben should have a hard top pro model. I'd preorder.
legend
When I was a kid living 150 miles from the beach but hooked on surfing, I made my own board. I took a foam board (about 5.5 ft. long) and I fiber-glassed it and added 3 hand carved wooden fins. It turned out pretty good for my first surfboard. The only problem was I didn't kno how to surf. When my family went to the beach for 2 weeks (Ocean City, Maryland), I did nothing but Kooking on my surfboard. I really didn't have a clue what I was doing. I got mad one day and smashed my surfboard and threw it in the trash (I was upset). But it was the first time I had every tried to surf, and I used my own home made board. Had I known how to surf at the time I would have worked for sure. How good? I don't know but it would have worked. It wasn't until years later that my friend and I put our money together and bought a new surfboard (about 5.5 ft long and a quad fin - popular at the time). I learned to surf in one day on that board. I was getting 50 yd. long rides just taking an angle down the wave and just holding the angle until the wave ended. I was smiling and so happy. I couldn't believe I was surfing (my dream). I did a lot of skateboarding on half pipes, parks, and the street so I think that really helped my balance in surfing. I also did a lot of body surfing that taught me how to catch waves over the years. Eventually, I moved to the beach after High School and I surfed everyday (no matter the conditions - rain, sleet, high winds, ripping current, etc). This was one of the best times of my life (becoming a local at the beach and getting good at surfing).
good story
I can relate to the time put in
I’ve never been on a board and just watch yours and Jamie’s vlogs. Can we get a Living the Dream counter? Psyching!!
Duuuude🤙🤙 always wanted to see someone do this! Great vid!
Thank you!
That was mental!!! You were straight up sending it Gravy Train Style!!! Despite the cray-cray VAS conditions & keeping your injury in check! That was soooo... sick!!! (Legend) FTD!
Thank you!
Great vid! Cool to see the process of how a board get made/remade. So much work!
the work kept coming! haha
Nice! Now let's see Ben shape his own custom board !!! 😁
it's on!
The time it took you to record this was worth it. Very entertaining (sort of educational too 😆). Thanks!
Thank you!
Year of the learn!!!!! Love the stoke!
Thank you!
Man of his craft, surfing and vlogging. Love all the work and details you put into your videos! 🤙🏽
Thanks so much!
its like getting back with an old girlfriend from highschool... still the same familiar ride but she learned some new tricks and does some things better
Underrated comment 🤣🤣
You have been crowned the KING of analogy, amazing
king of analogy or anal?!😂
Great Video! Brian seems to be a super knowledgeable and full of energy!!
Great job Ben keep up the good work and sharing the stoke!
25:24 that dude was so stoked yeeww
Anyone else having perverse thoughts towards their kid's old Wavestorm?
Such a great video.
Been shaping for about a year now and I’ve always said the next time I see a buckled one laying on the beach I’d glass it
Next first one! Brand new Foamie and glass it! Ben the board worked like a champ. That floater was insane.
lol.... "Makki. Mak. Ohh. It's a smoke stack."
For the Wynn!
hahaha!
Never new making surfboards could be so satisfying. Nice video Ben!
Thanks so much!
Woo! I lived and worked at a surf camp for a while shaping and repairing boards. Many a soft top was butchered and used for a blank 👍🏼 Gotta say though, so many nonos went into yours Benno😂
Can you go into further detail? Just curious.
@@CarterParry yeah bro, heres just a few- first off, that plastic bottom with the pineapples should never have been laminated over, resin(epoxy OR poly)-to-plastic bonds are always poor, especially that kind of plastic. It will delam in no time flat. Secondly, and this is a contentious subject but Futures fin plugs are made to be laminated over and opened during the sanding process where they end up open and flush with the bottom of the board. This makes board builders think that they can stick them in the holes and just lam over them when in fact this is the best way to end up with fins at odd "cant" angles. They should be installed with dummy fins first and set to the correct angles, left to cure and then lammed over. Third, that board was never sanded. That shiny finish is full of bubbles, lint and other specks of crud. All boards are sanded removing about 2-400g of weight. Even if its a gloss finish the original glossy shine of the resin is always cut back. We use 120-240-320 grits with a couple of different density pads and orbital at the end for a perfect sanded finish👌🏼 A gloss coat and hand-sanding to 1200 then polish for gloss. They knocked this beast out with the minimal amount of effort and cut all the corners. But hey, its just entertainment. 😄👍🏼
@@boccacantiga5095 cheers for the write up mate
That’s sick!! I want one of those so bad!! Honestly your my favorite surfer ever!
Thanks so much!!
Nub Nation for the win
hell yeah Ben can't wait to see you and Jamie shred pipeline
Stoking, thanks!
Good to see you keeping it nice and clean in the Kitchen!
Surfboard factories, spent a lot of time in one with both good and bad memories! For the most part I always loved being in the shaping room. Rock on Ben Gravy. My claim - Master Shaper Extraordinar' Brian Wynn.
I can now see kids dumpster diving to give broken soft tops another life in the ocean. Excellent job Ben!
Thanks so much!!
Genius idea , congrats Ben.
Sick!!! Keep scoring Ben
for the dream!
This Bad Daddy!!! Love it!
Frankinboard ⚡it lives ! Recycling to a new level 🤙
haha yes!
You always come up with fun ideas, great video !
Gotta be stoked with that
loving it !
Merry Christmas and thanks for sharing the dream!
I’m learning how to surf for my birthday lol! I’ve been binge watching yours and other peoples surf videos ur so good at it🏄🏼♀️🌺
Its so great to see this legendary board become more legenday!!
Thanks Hayward!
Ahhhh so good i want rn ahhh amazing waves gotta keep myself over I always watch amazed riding the heavy waves with heavy music like Delta Parole or with relaxing music videos in background.
Nice work Brian!!
Sounds like something I would do. Awesome vlog dude 🤙
Merry Christmas Ben and Jordan!
I got a black Ben gravy knit hat I have been rocking since Christmas Day!
For the dream!?
Ohh, where is the Subaru!?!? We bought a 2016 limited a few months ago. Solid car.
Merry Christmas!
@@BenGravyy 😎👍🏼🤙🏽
One of the coolest vlogs in a while! So sick
This was one of my favourites BG this recycle/renew project on that twinny was super entertaining and interesting. Badass board. looked like it rode nicely. Happy New Year! Enjoy Hawaii...
Thank you!
They need to be produced!! Nice work!!
Thanks!
Soo nice man, a board you gonna keep for ever I think 🤘🌊
For sure! Thank you
Sick vid! Awesome idea! Thanks Gravy man 🤙
Wynn twin fin fiber foamy FTW Legendary!
yewwwww
Favorite video in a minute. 🤙🤟
Thanks!
Great Episode Idea! keep em coming!
Wow, lets see these come to market!
Yew! Pschyed on the Hawaii trip. Love it when you and Jamie het together.
Thanks!
Bro thank you for making this one video instead of splitting it up through the vlogs.
The board is sick
The intro KILLED me!!
That looked really fun. ❤️🤙
Fun episode, thanks Brian u r a legend
That bottom looks sweet with the hot coat on it!
right!
Super interesting process!
What a great idea!!!
So cool!
I ‘have” made the bed too Mr. Gravy!! 😝
haha!
Futures boxes! I may have to make some novelty fins to go with that board.
Ben needs a shaping shed/boardcave at the new Gravy family house 🤘🏽
trueeeee
That board looks awesome! Looking forward to see you in hawaii
Thank you!
I’ve wanted to do this for so long!! Definitely gonna talk to my local shaper about it!
Hey Ben you should make a vid/vlog of your quiver. Favourite board, best board etc
Keep up the stoke, for the dreeeeam! 🤙🏻
That is soooooo sick!
I love your edits they are sick!
sick outcome after a load of work on it!
board looks sick!
im about to glass a foamie i just picked up...this video helped me alot. thanks bro see you out on the waves
love it 😍
Merry Christmas love the videos
Thanks so much!
Brian Wynn rocks!!!!! Love the new creation of your board, Ben!!! Have fun with Jamie in Hawaii :-)
Thanks so much!
@@BenGravyy No problem!
Nice dude !!! I got some foamies that are getting the same treatment 🤙
yewwww
this has stoke for fckn days. That thing looks truly metaepic 🤙🏻🔥🔥🔥🔥🔥⚡
22:54 "Makki...Makk... oh, it's a smokestack."
hahaha
Bens videos are always fun to watch but this video is damn interesting
Kooking out of your mind.
Not sure what that means
Yeah, Merry Christmas Brudduh!!
Merry Christmas !
@@BenGravyy ☃️🎄⛄🤙
Great all of your vídeos and You and jordan are BIG DOGS!! THE BEST!!
Brilliant. When I wrecked my knee, I bought an 8 ft wavestorm as a rehab board. Couldn't do cutbacks on it, so considered chopping the tail (it was only $99) to make it 6 ft...but ended up splurging on a catch surf/6'0 Log.
Really enjoyed this vlog dude. Cool to see that process unfold. Was wondering who was filming that part where Jordan was in the shot then I heard JP’s voice and remembered he visited you not long ago. I always liked that dude. Thanks for taking us along for the ride ✌🏽❤️🌊🍍🤙🏽
Thanks so much!
Fiber-Foamy... YEOW!!
yewwww
Outstanding...🤙
Thanks!
@@BenGravyy Your positivity and motivation are truly inspiring...I live in Ocean county NJ...Nothing better than winter surf...empty, overhead and freezing. Perfect!😈...See ya out there...🙏🤙🇺🇸
The board looks sharp ! As far as possible would be nice if you go for some surfboard shaping/testing content.
Proud of you as always! SpiL here. Have a ticket for Oahu in Jan as well, we should shred
I was wondering when this content was coming! Kept seeing the gram stories
dreamers!
This board was made by and for you. Your dream board for the dream.
Thanks Bruce!
that was sick mate. for the future you should make your own surfboard
i'm thinking about it !
25:13 that bird 😂😂
Boardshaping. Something I’ve always wanted to do!
You should glass a wave storm!
heavy claims
Dude you were ripping on that thing holy crap! Ftd
haha thanks!! It went well, can't wait to see it in some more manageable surf
So great. Would love to try this. What's the liquid foam they used to cover the old the old blank with?? Any ideas?
That board mod. Upped your surfing to the rafters on that sesh. 😉
for the dream!
Yeah 10s! Kills easily even in mad offshore gail force. I had my doubts for half a minute but I was made a believer.
Dope!!!