Coupling Assembly-4WD (Borgwarner) Repair
Vložit
- čas přidán 30. 10. 2023
- Hyundai / Kia (2004 up)
Coupling Assembly-4WD
NOISE DIAGNOSE AND FIX
47800-39000 (BorgWarner 51-02-027-001)
Coupling Assembly 4WD makes the same noise as the rear differential.
CZcams music:
Finland - TrackTribe
Fingerprint - Mini Vandals
Come Get With Us - TrackTribe
Bloody Tears - Quincas Moreira
Sunset Trails - DJ Williams
Emerald Seas - Aaron Kenny - Auta a dopravní prostředky
Спасибо! Очень помог 👍
Подробное видео. 👍
Did you clean each disc before installing them or just left them how they were when you pulled it apart?
Yes, I cleaned the discs before installing 👍
Where did you get the replacement bearing
The bearings are fairly basic sizes, you should prefer branded bearings, e.g. SKF Available in standard stores
hello sir
i have kia sorento 2023 2.5 turbo
i have problem of warning light in the dash of 4wd
tell me there is torque error
code number : P195800
after drive in car several minutes and light shows up on dashboard
what i must to do to earse that light permanently.
thanks Kindly ❤
Hey, there is no information about that fault.
@@latexihire thanks anyway 🌹
Good video..how often do you recomend to change ATF on that coupling ? Manuals of that car only recomends oil changing on the rear differential but never mentions oil changing on the coupling. How long will last that ATF oil ?
The oil in the unit lasts well for many kilometers, the recommended oil change is 300,000 km, I used basic atf oil but a better option is Castrol transmax z.
@@latexihire thanks for your response. You removed coupling due bearing noise. But in my case I am having some issue. The 4wd warning light on dash is flashing and I can see some oil leak around rear differential. Also the car has no power when the throtle pedal is pressed. And got in scanner the code (4WD control code P1726)
So I ask my self if the main problem is in the coupling....?
@@selprocr Hi I don't think the 4wd coupler is causing it, but one of these -> wiring, connectors or control box. The car can be driven without the 4wd coupler, as I did when I repaired the 4wd coupler part.
@@latexihire when you say "control box" what do you mean ? I am surpriced to know about car can drive with the traction bar removed.. I tought that was not possible. At this time I have not dissasembled nothing yet, maybe next week. Can be got in the market the coupling discs as a repair kit ? ..just in case.
@@selprocr I mean the motor controller 4wd circuit box. There is no information about the clutch plates, they apparently last well.
Good afternoon, tell me how you managed to remove the package of friction discs assembled with the shaft; I can’t do it? I don't want to spoil the seal, I just want to change the oil.
The video from 5:35 to 6:25 should be clear...?
@@latexihireYes, as you can see in your video at this time, everything is clearly visible, but for some reason my clutch is exactly like that. I drained the oil and started further disassembly, and I can’t get the whole thing like in your video, what do you recommend? I can send you a short video to the manager so you can see and give advice
@@werx_tv6759 Hi, I had a problem at 3:30 in the video -> the cover was stuck, I put oil in between and knock knock, the O-ring is stuck without oil...
@@latexihireI managed to get everything together like in your video, can I just wash it and fill it with fresh oil and put it all back together?
@@werx_tv6759 Yes, all parts washed/clean, new oils in.