It's been 13 years since I've had to use a SlimJim. Sir this was one of the best videos I've seen and you're talking to a retired special operations guy who had multiple classes on it 20 years ago. And your class is even better
Old video still helping people! Saved my son 150 pop a lock today! He had been trying with a straight slim jim, I advised him to put a curve in it. Open a few min later! Thanks!
These tools while not the thinner traditional slim Jim bars are commonly sold at places like O'Rileys Auto Parts and Advanced Auto Parts also listed on there websites. O'Rileys Auto Parts has the cheaper price for them $7 So if you are looking for a cheap place to buy one without shopping online now you know.
OK if you are like me and couldn't get this to work if your life depended on it, on your f250 super duty with electric locks. what did work is I used one of those plastic pry tools to pop door panels loose, to pry the top back drivers side door open enough to insert any metal rod around 1/4 inch in diameter or less with an inch or so "L" bend at the end. It needs to be long enough to reach the electric lock and unlock buttons. You will most likely need to bend a slight arch in the middle and bend a loop at the other end so that you can twist the rod to hit the unlock button. you should be able to unlock your truck in a couple of minutes. you may also want to protect your paint with cardboard. Good luck
Thanks for the video. Was locked out of my 01 f150 and was able to go buy a slim jim. I was stuck for a while until I watched your video. The key was the bend to the end of it.
well this all looks good, but it didn't work for me. I tried for over an hour. What side of the glass are you on since your windows down? and how deep are you going with the slim jim, what way is the radius of the bend facing,, toward the inside or outside? If it's the inside, with the glass and window gasket, there's no way to maintain the radius bend. It straightens out when you insert it. This is a 2000 F250 Super Duty
one thing you do have to do is put something in between the window and the door if you're a locked out completely you want to create yourself little space then work your way to the back if you see the lock move up then you have the right sweet spot
What’s the deal with those gloves. The guy who broke into my F350 and other cars at home left those pair of gloves at the crime scene multiple times. And it’s a coincidence to see them on this video lol. Great video tho!
Thanks lost @ 1st. Watched video went back out at 10:30pm at night. Opened it in about five minutes. Of course It took so long cuz I had drank a six packs of Corona's. Did I say Corona?
You got to put a really good angle here, i tried with a slight angle and didn't work, i put a good bend on the slim and worked first try. Start with a slight angle and keep bending until you find the angle your looking for
Don’t give up it absolutely works. Like he says in the video if it’s straight it won’t work. He says a little angle, in my experience I had to really put a lot of curve in it but fucking finally that thing popped and it was glorious
It's been 13 years since I've had to use a SlimJim. Sir this was one of the best videos I've seen and you're talking to a retired special operations guy who had multiple classes on it 20 years ago. And your class is even better
Just helped me get in my work truck because I fed up! Locked key inside at 11pm when I roll at 5am. Thank you!!!
Old video still helping people! Saved my son 150 pop a lock today! He had been trying with a straight slim jim, I advised him to put a curve in it. Open a few min later! Thanks!
You say to put a curve in the SK. Which way does the curve bend toward Interior or exterior?
Awesome directions. First time with a slim jim and in within 10 minutes. Thanks!
I thought this was a beef stick 😂
Old video , but the best no bullshit video that actually shows you a little bit about the method and the how and why .
That was a big help,my neighbor locked himeself,googled,saw your video,30 seconds later we were in. Thanks brother!
Well demonstrated and explained. I had locked my keys inside and this video helped out a lot. Thanks
Adding that curve helped me get it in seconds. Great tip!
These tools while not the thinner traditional slim Jim bars are commonly sold at places like O'Rileys Auto Parts and Advanced Auto Parts also listed on there websites.
O'Rileys Auto Parts has the cheaper price for them $7
So if you are looking for a cheap place to buy one without shopping online now you know.
OK if you are like me and couldn't get this to work if your life depended on it, on your f250 super duty with electric locks. what did work is I used one of those plastic pry tools to pop door panels loose, to pry the top back drivers side door open enough to insert any metal rod around 1/4 inch in diameter or less with an inch or so "L" bend at the end. It needs to be long enough to reach the electric lock and unlock buttons. You will most likely need to bend a slight arch in the middle and bend a loop at the other end so that you can twist the rod to hit the unlock button. you should be able to unlock your truck in a couple of minutes. you may also want to protect your paint with cardboard. Good luck
Got it on the first try with the help of this video. Thank you sir!
Used your technique and a slim-jim. It worked perfectly first time. Good job sir!
Video just help me out big-time. Both sets of my keys were in my pickup
Thankyou! This also works on a 2019 f250, just did it, took some time but it worked. Thanks again for the video, well done!
I have been trying on a 2019 ford superduty no luck guess it's good I called AAA.
Helped me get into my plow truck, thanks !
Thank you very much.
Your video helped us a lot🙌
After watching this video it took no longer then 20 sec to open thanks bud
Thank you so much for posting this!!! You helped me get out of a very bad situation tonight. Your my hero bro.
Thanks for sharing. I locked both sets 🤦♂️Up tonight and adding the bend fixed me right up in under 2 minutes!
Been there done that. I in fact just locked both sets of keys in it.
Thanks for the video. Was locked out of my 01 f150 and was able to go buy a slim jim. I was stuck for a while until I watched your video. The key was the bend to the end of it.
Thank you so much! I was finally able to do it thanks to your advice.
He made it look so easy. Not so much when you are Amanda
thanks brother it worked perfect
Video just came In handy for me thanks you sir.
youre the best man
Thanks very much bro 👏👏👏🎩🎩🎩
I just pull my antenna off get er done. It's always there later if I need it.
you are operating inside the window where the linkage is. how can you do that when window is rolled up and you are outside?
great job.it work
Awesome work first try
Someone stole our 2006 F350. Captured theft on CCTV and it took them less than 3 minutes to jimmy the door, pull the ignition and start it.
saved the day thank you got it open
Is it the same method for different cars?
jus got my truck open!! ty
Thanks man I have a hard time to figure it out because the curb goes into the cab
Thank u
well this all looks good, but it didn't work for me. I tried for over an hour. What side of the glass are you on since your windows down? and how deep are you going with the slim jim, what way is the radius of the bend facing,, toward the inside or outside?
If it's the inside, with the glass and window gasket, there's no way to maintain the radius bend. It straightens out when you insert it.
This is a 2000 F250 Super Duty
js break ur window
It almost looks like you are on the inside of the glass
thank you sir
one thing you do have to do is put something in between the window and the door if you're a locked out completely you want to create yourself little space then work your way to the back if you see the lock move up then you have the right sweet spot
Just found out Grill tongs work you just have to take the handle off them and flatten it out and it grabs
What’s the deal with those gloves. The guy who broke into my F350 and other cars at home left those pair of gloves at the crime scene multiple times. And it’s a coincidence to see them on this video lol. Great video tho!
why not do with the window up
How to slim him a 2006 dodge dakota
worked out for me bout 2 minutes. ....
Thanks lost @ 1st. Watched video went back out at 10:30pm at night. Opened it in about five minutes. Of course It took so long cuz I had drank a six packs of Corona's. Did I say Corona?
what if my batt is dead?
Good explanation. However, please learn to hold your phone sideways in order to make a proper recording instead of a thin strip of video.
Lo mejor del vídeo es aprender a abrir los autos y llevárselos
Wish you would have showed truely with window up i tried and tried doesn’t work like that with window up
It's a 1999 2007
and this is how people are stealing these trucks right now lol.
It works I just unlocked of my truck with it no joke
Use un imán neodimio el magnetrón lo abrirá
You got to put a really good angle here, i tried with a slight angle and didn't work, i put a good bend on the slim and worked first try.
Start with a slight angle and keep bending until you find the angle your looking for
Works on my 11 🤦🏻♂️🤦🏻♂️🤦🏻♂️
I read I is illegal to use one . Really.
You save me
Don’t give up it absolutely works. Like he says in the video if it’s straight it won’t work. He says a little angle, in my experience I had to really put a lot of curve in it but fucking finally that thing popped and it was glorious