How to clean iRobot Roomba e5
Vložit
- čas přidán 3. 07. 2024
- On this episode we will learn how to fully clean iRobot Roomba e5
this will be useful to any other iRobot Models beacuse all the accessories are allmost the same.
You will see on this guide how to clean the iRobot Filter,The iRobot Main Brushs,iRobot Side Brushes And the iRobot Wheel.
Dont Forget you have to replace some of this accessories.
I will tell you at any part of each accessorie when you need to replace it.
Fell free to comment below if you struggel at any point on this video.
If you liked the video please leave a thumbs up.
👇 SUBSCRIBE TO ICanFixIt CZcams CHANNEL NOW 👇
/ @icanfixit6650
This channel will help you in DIY guides
that will save your money and improve your skills In any kind of electronic devices in your house.
You will find a lot of helpful videos that will make your life easier
👇The Tool kit I use [affiliate link]:👇
amzn.to/2QRyatP
★☆★Check Out some more DIY videos:★☆★
How to clean iRobot Roomba e5
• How to clean iRobot Ro...
How to replace cabin filter Skoda
• How to replace cabin f... - Věda a technologie
Thank you for your help. Simple and to the point.
Terrific video! Easy to follow and exactly what I needed! Thank you.
Great video. The brushes have soft foam tubes inside them. I took my brushes completely apart by sliding the center rail of each brush out completely. It's a bit hard but they come out. Soaking the brushes in water just traps moisture inside the foam. I have a self emptying charging station and if any water gets into it it will destroy the motor. So once they are completely apart you can let the pieces dry for a few hours and it goes back together and works fine.
Wasn't able to unscrew the side brush. Screw was on there tight! Appreciate the video!!
The first screw spin is the hardest try to hold one of the side brush arms and then open the screw and try to do it with flat screw that have the same size of the screw it will be easier
Well done. Thank you. I was doing everything except washing the rollers with soapy water. Great tip! Have a great day!
I'm very glad to hear, now just keep persisting with thos cleaning methods and your IRobot wont stuck at all.
Thanks for watching
another great video! thanks !
Muy didáctico,súper bien explicado.Gracias
Muy bien explicado.Gracias
I recently had to repair one of these. I noticed that the wrap-around front bumper section was full of compacted muck, which was enough to affect the operation of the sensors. Result was the robot hitting furniture hard.
The bumper is removed by a number of small screws on the bottom.
Thanks for letting us know !!
Great demonstration
Thank you for watching
Excellent Video!
Thank you. If I do half what you did I will have improved as a result of watching.
Great to hear
thanks for watching!
Great video. Well done
Thank you i'm glad you enjoyed it
AWESOME VIDEO!! THANKS SO MUCH!!!
fabulous!!!!thank you!
Thank you for watching the video
Great video... Thanks
Thank you for watching
Tnk ❤
👇 SUBSCRIBE TO ICanFixIt CZcams CHANNEL NOW 👇
czcams.com/channels/QAzt1IuH5cTjAXWA04hV3g.html
thanks!
Thank you for watching !
Thanks very helpful!
Thank-you! Very thorough video!
Thank you for watching !
I just bought from Sam's club on sale $199.98
I wish I didn’t see your comment cause I just bought it from Sam’s the other day for more $.
Would be easier to follow without the music.
How often to you need to replace the filters? Great video ty!
Hey bobbi slavin first thanks for watching the video. the Irobot manufacturer recommend to replace to a new filter every 2 months.
I have 2 dogs with a lot of fur so I replace the filter every month.
@@icanfixit6650 thanks for the quick reply. No dogs here, lol. So once a month sounds ok.
The filter material allows you to clean it with compressed air, you don't need to replace it as soon.. maybe every 5-6 months.
@@irakmarin4911 ty
I cannot get the 2nd roller in! It doesn’t fit. It’s too long. But it can’t be, right?! I’m pushing the one end, trying to get the other end to simply settle in its place & latch it closes. I didn’t lose any spring, -_-
I can’t seem to reinstall the second brush. Is there supposed to be a gray plastic cap on the end on the right side. It’s like it’s too long to go back in.
yes each one of the main brushes need to have a gray plastic try to make sure this plastic fit till the end and make sure you putting the brush at the right side it wont fit in both sides
Pode sêr traduzido em Português? 4:56 4:59
My Roomba makes alot of noise when its cleaning.
Hey thanks for watching make sure you don't have something stuck on your main brush rollers its the number 1 reason for noises around the Irobot.
Where do I set the timer for when I want it to run.