Mercedes R107 fuel sender - common problems and how to solve them
Vložit
- čas přidán 24. 03. 2023
- This is a detailed video showing the different fuel senders for early and late R107 Mercedes SL's. The video shows how to remove and open up a fuel sender and repair it if need be. The video also shows how you can purchase later fuel senders relatively cheaply from companies such as Uro Parts and Rockauto. Most of these parts are still available from Mercedes directly, and the SL Shop also has a huge range of fuel related parts.
- Auta a dopravní prostředky
Muy buen video y explicación, ¿ Podrás darme los significados de las letras en cada terminal de conexión del aforador ( terminales T, G y W ) ?, por favor
Thanks for all the advice Mike, really helpful. I'm not getting any resistance reading so trying to remove the unit. However, the nut is really stuck and not budging, any advice on how to release it?
Hi, sorry to hear you’re having a problem. What tool are you using to remove the nut? Do you have the correct sized socket and an impact wrench? Mike
👍🏻👍🏻👍🏻
Thanks = you have got some great K Jetronic videos on your channel. Mike
Excelente Maestro, ¿ Tienes la información de los colores de los cables para cada terminal del aforador y qué función es la de cada terminal ?, es que mi automóvil tiene desintegrado el conector del cableado.
Hola -
W = reserve indicator light (Green/Blue)
T = Ground (Brown) - (ground symbol)
G = Gauge (Black/Blue)
Mike
@@MikesMercsandothercars Excelente Maestro, agradezco mucho tu respuesta, me sirve mucho para confirmar mis conexiones , Saludos desde Nicaragua
@@luisarturogarciaarmijo9117 My pleasure. Mike
@@MikesMercsandothercars Gracias Maestro Mike, seguiré tu canal🙂👍
Mike I noticed you have a cross reference from number on diagram to part number. I have the original 1971 catalog for my 1972 350SL US that has the diagrams with numbers on each page. Can you please let me know where you found the cross reference to Mercedes part number. Many thanks!
Hi - I usually use the site below:
mb-teilekatalog.info/?lang=E&mode=BM&class=1&markt=AG
Mercedes Parts in Bristol are also very helpful.
Mike
Thanks Mike you are very helpful. I am going send my tank to radiator repair shop to be boiled out. It’s in much better shape than yours but there was rust in the gas i drained. My sender is different to yours. It has 5 tiny nuts that hold it down. I think it will have a small non rubber gasket I will need order. I am going to remove tomorrow.
@@martinowens5309 What year and model car do you have? I was only aware of two types of sender. Mike
@@MikesMercsandothercars
Mike I have a 1972 350SL VIN 10704412005561. It is a very early US version with a V8 450 engine.
It is 8 inches long. I took it out and had trouble pulling the last tiny bit because the bottom cap was rusted. I slightly damaged the very bottom tube hoping I can patch with epoxy something resistant to fuel.
At 7:21 how do you remove the plastic cover inside the soft top compartment. I don’t want to pry it off and bend or break it. It doesn’t twist off either. I’ve tried that. Any ideas?
From memory, it is just a press fit. They can be rusted in there and are still available if you do break it....
I took apart and cleaned my old style sender. It was horribly dirty. Just before i or it together, i broke a thread wire. I soldered it but it isn't very good. As a result my gage is erratic. Some day i will buy a new old style one.
I have two old style ones - both look OK although I havnt fully tested them. I'll let you know if and when I list it on ebay. Those old style senders are horribly expensive! Mike