Odins Wolf Survival reviews Ucos Classic Candle Lantern with a few add on bits.

Sdílet
Vložit
  • čas přidán 25. 08. 2024
  • This is a review of the brass classic candle lantern and an aftermarket oil lamp insert.

Komentáře • 27

  • @dannyalvens5418
    @dannyalvens5418 Před 6 měsíci +1

    If you want a cheap reflector for your lamp..Get a spoon from the stackable boy scout mess kit and cut and bend it to hang it on the edge of the light....The military spoon from a mess kit works great too.

  • @JPetersenJohnMiltonPetersonIII

    Great info, thank you!

  • @OldNavajoTricks
    @OldNavajoTricks Před rokem +1

    I was inspired by these to make a beer can oil lantern, almost complete now :-)
    But money no worries I'd have a load of these and a pan full of wax for refills 👍

  • @swj719
    @swj719 Před 4 lety +3

    There is also a collapsible two-part top for the lantern that is great for when you are hanging it - it reflects down any of the tight that would otherwise be "wasted" up. Packs flat and adds virtually no weight.

    • @OdinswolfSurvival
      @OdinswolfSurvival  Před 4 lety

      Ice seen those! dont have one yet tho

    • @TNBushcrafter
      @TNBushcrafter Před 4 lety +2

      Also can be used for a windscreen for a stove in a pinch. Have had UCO lanterns for over 35 years. Wish I still had the oil lamp candle they used to sell. I tell people the same thing about a candle. Can keep them from freezing in a blizzard. That reflector that clips to the back is nice too. I like the cocoon for 1 day trips. I go up to the fleece pouch to carry extra candles if going for any longer. They also make molds now to make diy candles, which I make beeswax and they burn much longer then the standard. That is the only drawback, them candles are pricey. I did make my own oil candle but it sooted everywhere.

    • @OdinswolfSurvival
      @OdinswolfSurvival  Před 4 lety +2

      Shorten the exposed wick, it might help with the sooting

    • @TNBushcrafter
      @TNBushcrafter Před 4 lety +1

      @@OdinswolfSurvival yeah, tried all heights. Maybe better with denatured alcohol instead of clean burning lamp oil.

    • @OdinswolfSurvival
      @OdinswolfSurvival  Před 4 lety +1

      Or liquid parrifin

  • @thebluemeanies1
    @thebluemeanies1 Před rokem +1

    There's an oil lamp that fits into the UCO on amazon occasionally... It's some Chinese made lamp that's not branded

  • @awesomesongs9832
    @awesomesongs9832 Před 4 lety +1

    How long do the oil inserts burn for?

  • @grampawterry8957
    @grampawterry8957 Před 4 lety +1

    I have one . I like them 100% better than the home made coke can lantern .

  • @GarryNichols
    @GarryNichols Před 4 lety +2

    where do you get the oil lamp?

    • @OdinswolfSurvival
      @OdinswolfSurvival  Před 4 lety

      Sadly it us no longer available. Ebay my have them for sale

    • @Eztliz
      @Eztliz Před 3 lety +1

      Etsy also has them.

  • @Dewint
    @Dewint Před 4 lety

    Do you have link for oil insert?

    • @OdinswolfSurvival
      @OdinswolfSurvival  Před 4 lety

      No I dont think it's being made any more

    • @buckshot4428
      @buckshot4428 Před 3 lety +2

      @@OdinswolfSurvival They quit making them as some overheated and caused a fire. I have one that's made from steel, but the smell it gives off is not good.

    • @OdinswolfSurvival
      @OdinswolfSurvival  Před 3 lety +1

      @@buckshot4428 I use liquid parrifin in mine and no issues. I can see kerosene would be bad

    • @buckshot4428
      @buckshot4428 Před 3 lety +1

      @@OdinswolfSurvival I bought the best parrifin I could find and it still smelled. I bought it from Amazon several years ago. Maybe it wasn't what it said it was.

    • @OdinswolfSurvival
      @OdinswolfSurvival  Před 3 lety

      I've never noticed a smell from it but your nose could be better than mine or you might have sensitivities to it. I know people that do