Worked like a charm. I buy some pants at thrift stores that are like brand new. I get my waist size but if they are a bit long I buy them anyway to hem. I had 3 pair in the closet and found your video go finally get them done. Your video made it easy and thanks a million.
Thank you! I just got my tape from Amazon, it did not come with instructions. Finding your video is a life savor! And money saver, I was quoted $16.00 a pair to hem, goodness.
It's your decision. But, if you were in business to hem random strangers pants all day, and you have no other job or anybody else to rely on to pay your rent or mortgage, how much would you charge??
@@jakefriesenjake you make a good point. The hemming fee also includes the labor and some of them hand stitch the hems which take more time. I was able to afford $15 a pant a year ago to get all my pants hemmed. Up to this day, the hemming has stood strong through several washings and dry cycles. Now, I am wanting to save money and will try hemming this method for the two new pants I bought.
Using a steam iron helps the fabric glue tape set easily. Because the pants may be narrower at the bottom than at the fold or the bottom once it is rolled up to shorten the pants, you may need to open the inside leg seam and spread it a bit to avoid unwanted tucks or gathers in the ironed hem.
Great suggestion to go for the thinner part so the iron can heat it all the way through, I hadn't thought of that. I will tackle my curtains's blackout lining now.
it does make it a little heavier. If you cut off the excess, just ensure that you roll the end into the cuff. Otherwise you'll get fraying inside the pant leg.
A few washes then it starts peeling abit but you redo where is peeling again I just add abit where its missing and also it depends on fabric lycra goes faster than tougher material
Surely you should have cut off some of the excess before hemming. People will wonder if you are wearing "short long" trousers, or "long short" trousers with a hem the size of route 66
I wonder if it's a good idea to actually snip off that original 1/2-inch hem that the jeans come with. Then it would lay much flatter when ironing the tape on.
You can do that, only concern is that with a cut edge, it will fray over time. With the tape method, you can't really roll and protect the exposed edge.
I haven't tried this particular tape, but there are brands that are permanent. Read the packaging. Name brands such as Dritz and Wrights seem to do the job, using this CZcamsr's method. Some are made with a peel off tape side where you iron one side at a time.
Before I try this, I do have two questions (and maybe you addressed them in the video and I missed it) 1. If I mess up, can I remove it even after ironing? 2. Will I have to re-do this every time I wash? Or is it wash-resistant
You can’t really undo it, the tape melts and fuses with the fabric. You might be able to get it apart but I would be worried about tarring the fabric. It does not come out in the wash unless you don’t get it fully fused. Take your time and just make sure it’s how you want it before applying heat
Stupid question I'm sure, but has anyone ever used heavy duty staples to hem pants? I'm talking just knock around pants and jeans, nothing fancy. I wouldn't think they'd be too obvious if you only use a few for each leg.
@@efdupdate? How many washes has it taken to undo? 😁. I am thinking of doing this to designer pants. But I need to do this quick for an event. In the future would I be able to still get it professionally hemmed? As in will there be yucky glue stain etc?
The original hem is of a smaller circumference than where it meets the leg when folded and results in surplus fabric pleating. I'd suggest you learn to sew or find someone who can. Trouser hems like this are pretty basic, but blind stitched ones are more difficult and require a special machine or be very carefully hand sewn.
Bro lol. No. You do just one side, with the iron on a low-medium setting, iron directly onto the tape, when it cools you PEEL the paper off, then place the other side of the fabric to be hemmed over that and iron again
@@efd I think the tape with paper has glue on one side. After ironing the tape on over the paper, you remove the paper and put your hem over it. The glue doesn't work as well though.
@@efd You hit the nail on the head because the instructions on the back of my tape are exactly the way you demonstrated, thanks for the step by step video! 👍
Sure was refreshing to watch this and not have to try and tune out awful music or a lengthy backstory. I’m going to do this instead of using my temperamental demon possessed sewing machine. 5 kids and no time to lose!
Thank you!
I don't own an iron, but I can confirm this works just as well with a hair straightener 😂👍🏻
Ha! That’s awesome
everybody else made it seem complicated but this video did it for me, thank you!
This is an absolute lifesaver! All the slacks in my size are too long for me and I have work in an hour. Thank you :)
Glad it was helpful!
Worked like a charm. I buy some pants at thrift stores that are like brand new. I get my waist size but if they are a bit long I buy them anyway to hem. I had 3 pair in the closet and found your video go finally get them done. Your video made it easy and thanks a million.
Glad it helped!
I love the way how you explain, so easy, and quick! Thank you!!👍
You are most welcome!
This is easier then I expected. Thanks for the tutorial!
you are most welcome!
Thank you! I just got my tape from Amazon, it did not come with instructions. Finding your video is a life savor! And money saver, I was quoted $16.00 a pair to hem, goodness.
Awesome!
It's your decision.
But, if you were in business to hem random strangers pants all day, and you have no other job or anybody else to rely on to pay your rent or mortgage, how much would you charge??
@@jakefriesenjake you make a good point. The hemming fee also includes the labor and some of them hand stitch the hems which take more time.
I was able to afford $15 a pant a year ago to get all my pants hemmed. Up to this day, the hemming has stood strong through several washings and dry cycles.
Now, I am wanting to save money and will try hemming this method for the two new pants I bought.
Using a steam iron helps the fabric glue tape set easily. Because the pants may be narrower at the bottom than at the fold or the bottom once it is rolled up to shorten the pants, you may need to open the inside leg seam and spread it a bit to avoid unwanted tucks or gathers in the ironed hem.
You did an excellent job of showing how to hem with tape !! Thank you !!
Great suggestion to go for the thinner part so the iron can heat it all the way through, I hadn't thought of that. I will tackle my curtains's blackout lining now.
Glad to help
Thank you! Just used this and my pants fit perfectly now :D
I didn’t understand the explanation on the back of the package, your video made it clear. Thanks for taking the time to show how’s done!
Glad it helped!
Thank you for this DIY video because I sure was going to the Taylor to have my pants hemmed. I'll sure save 15 dollars with this method.
glad it helped!
Why do stores not have anything for us short guys?!?!?
Maybe that’s a million dollar idea, instead of the tall and big store, we create a short and fat clothing line, haha
@@efd there's an online store for short people but it's expensive.
I know right!!!
@@efdamen! 😅
If you really wanna know it's bc you can always take fabric off but can't usually add it on, this is my realest answer
This helped me so much! Thank you :)
To save permanent creases when you turn them back you can iron them not inside out first.
What about showing the final result??
Thank you! I've watched other videos and they look so confusing this really helped!
Amazing. Have to hem my boyfriends pants for tomorrows event and this tutorial was perfect thank you
Glad it helped!😊
Lol turning the pants inside out was the trick. Thanks…
So very well done, thank you!!!!
Thanks Debbie
I am doing this now. thanks Mr 😊
I have been wasting my money on alterations! No more. Thank you!
For sure! Even if you don’t like fabric tape, sewing it yourself isn’t hard either. I have another video showing that.
good job..i also did this to save lots of money..then tried the ..Heat n Bond peel tape which i hated..going back to the fusion tape..
What about wrinkles on either sides Bro?
Thank you, your video was very helpful!
Wow, great video. This will help me out a lot!
Thank you sir👍🏼. Good job
Just the video I was looking for. Thanks
Glad I could help!
Great tutorial very easy to follow 👍
Thank you for this video it really helped I appreciate it!
Thx for the video. Does it hold up in the washing machine?
it will if you use the proper amount of heat. If it doesn't completely melt, it can come apart.
Lifesaver, thank you very much! 👍🏻
Happy it helped!
Awesome thank you very informative
How does it hold up with washing the pants?
Thanks
Thank you so much for sharing this information. Really appreciate it
no problem, hope it helped!
Unexpected video today. Well done.
Easier than sewing and cheaper then having someone do it 😀
Doesn't having all that extra fabric at the end of the leg make it heavier? Why not cut some of the excess fabric?
it does make it a little heavier. If you cut off the excess, just ensure that you roll the end into the cuff. Otherwise you'll get fraying inside the pant leg.
you can
Great job Fred
Thanks!
How long will this last?
A few washes then it starts peeling abit but you redo where is peeling again I just add abit where its missing and also it depends on fabric lycra goes faster than tougher material
Nice helpful video...thank you I will definitely use this trick.. 👍
Hope it was helpful 😀
Surely you should have cut off some of the excess before hemming. People will wonder if you are wearing "short long" trousers, or "long short" trousers with a hem the size of route 66
I wonder if it's a good idea to actually snip off that original 1/2-inch hem that the jeans come with. Then it would lay much flatter when ironing the tape on.
You can do that, only concern is that with a cut edge, it will fray over time. With the tape method, you can't really roll and protect the exposed edge.
Does the hemming tape hold after you washed your pants?
Great tutorial, subbed
Any worries on synthetic materials? I have light weight slacks for work when it’s hot. It’s made of some kind of stretchy breathable material.
I don’t know that I would use this on that type of material. It works good on cotton, I don’t know that it would fuse with a nylon or polyester
@@efd they make press on tape that doesn’t require an iron! Just ordered some to see , thanks for the video and reply!
Just tried this on Polyester... did not work at all sadly.
@@andyblunt2152 thanks for the info. Might have to hem it the old fashion way.
Thank you for this. I asked my mom how to use it and got called stupid. Does it last long?
Good idea
Will it endure through washing and dry cleaning?
I haven’t had any issues yet, I do think it will need redone after awhile.
@@efd thanks
@@efd wonder if it ruins pants if you have to redo it over and over again every time you wash pants? If not, is actually a good solution
I haven't tried this particular tape, but there are brands that are permanent. Read the packaging. Name brands such as Dritz and Wrights seem to do the job, using this CZcamsr's method. Some are made with a peel off tape side where you iron one side at a time.
Comes off in the wash depending on how permanent you get with it
Thanks had to fix up my scrubs
awesome, glad it helped!
What if I messed up on my measurements? How can I remove it 🫣 help
Thank you
Before I try this, I do have two questions (and maybe you addressed them in the video and I missed it)
1. If I mess up, can I remove it even after ironing?
2. Will I have to re-do this every time I wash? Or is it wash-resistant
i have the same question!
You can’t really undo it, the tape melts and fuses with the fabric. You might be able to get it apart but I would be worried about tarring the fabric. It does not come out in the wash unless you don’t get it fully fused. Take your time and just make sure it’s how you want it before applying heat
I have 3 pairs of dress pants and the hem tape and a iron.should i do a half break on them
Thanks 🙌
I dont know i thought it wasnt work when all i had to do was leave it alone im i onow i have undone by pulling it apart tho
Much appreciated, thank you 🙂
I tried this and my pants look like they're flayering now how do i fix that
Thanks!
welcome!
Nice sir❤
Can it be undone, like stitches?
It cannot, it leaves a residue.
What if you wash the pants?
Thank you 🙏
you are welcome!
good job my friend... is it washable if you know?
it is washable
@@efd that's even better. Thank you
Can it be removed later? I mean if I use this tape to tighten a top and later have to make it loose on the sides.. is it possible to do?
no, it will leave a residue
Thanks 😊
you are welcome!
hey! so you don't need to dampen the pants before ironing?! im about to order this and try!! thank you for this video
I did not dampen them first, its all about the heat.
I’m curious, will the hem come undone if you wash them?
They will stay unless it didn’t get heated enough to properly adhere to the fabric
@@efd thanks!
Thx
Stupid question I'm sure, but has anyone ever used heavy duty staples to hem pants? I'm talking just knock around pants and jeans, nothing fancy. I wouldn't think they'd be too obvious if you only use a few for each leg.
I’m sure you could. My only concern would be them coming undone and scratching your leg.
Once in an emergency!
Can i remove this tape later on without leaving marks? Want to do with my baby's jeans? Its little long for him now but in few months he will grow up
I would not use this if you want to remove the Hem at a later date. This will leave a mark.
@@efd thanks. Any other hack which can be removed later?
In case i want to remove it then how to do that?
it can't be removed with leaving stains.
But it looked like you have extra fabric folded at the edges i have the same problem
I did, I put the fabric tape up high.
👍👍👍👍
When you wash your pants after using the fabric tape does it come apart in the washer
It will over time, especially if you have any gaps. Also depends on the fabric.
Can you wash them after using this kind of tape??
yes, you can wash it
How to sew the end of bias tapes
How to end a bias tape?
does this last forever?
It’ll last a long time.
Does it stand up to washing and dry cleaning?
So far so good but I think I’ll have to reapply in the future
Where to buy Fabrics tape?
@@shaskhan2585 amazon, there is a link in the notes.
it does. just got to deal with the excess
@@efdupdate? How many washes has it taken to undo? 😁. I am thinking of doing this to designer pants. But I need to do this quick for an event. In the future would I be able to still get it professionally hemmed? As in will there be yucky glue stain etc?
Does it not too thick without cutting it off
The problem with cutting is you can’t roll the cut end to keep it from fraying.
Why Amazon. Sold in dollar stores Walmart, sewing stores. Save your money on postage. 🇨🇦🇨🇦
Convenience, and I have Amazon prime so no shipping cost
@@efd Same here, the movies alone are worth the price. Free shipping & returns on most is a bonus. Good video thanks
How to remove it
This can’t be removed, it binds the fabric
The original hem is of a smaller circumference than where it meets the leg when folded and results in surplus fabric pleating. I'd suggest you learn to sew or find someone who can. Trouser hems like this are pretty basic, but blind stitched ones are more difficult and require a special machine or be very carefully hand sewn.
The background noises😂
Never quiet in my house
Bro lol. No. You do just one side, with the iron on a low-medium setting, iron directly onto the tape, when it cools you PEEL the paper off, then place the other side of the fabric to be hemmed over that and iron again
I must have gotten cheaper tape, it doesn’t have a paper backing
@@efd I think the tape with paper has glue on one side. After ironing the tape on over the paper, you remove the paper and put your hem over it. The glue doesn't work as well though.
@@efd You hit the nail on the head because the instructions on the back of my tape are exactly the way you demonstrated, thanks for the step by step video! 👍
lol.no.
Sure was refreshing to watch this and not have to try and tune out awful music or a lengthy backstory. I’m going to do this instead of using my temperamental demon possessed sewing machine. 5 kids and no time to lose!
1 sec boom pants ruined
For Pete's sake, it's easier to just stitch the hem instead of faffing around with the tape!!! --which might not hold anyway!!!
From Walmart cheaper than Amazon $3
Nice!
Is it better to use a steam iron istead to increase the temp ?
i wouldn't use steam. I think including water will weaken it.