Lexus ISF 2011 Fitting Tein Flex Z Coilovers Part 2
Vložit
- čas přidán 25. 05. 2022
- DIY fitting video for Tein Flex Z coilovers to improve the compliance of my Lexus ISF - Dont forget to watch Part 1
Torque Settings
Front
Castle nut on top ball joint 64 ft/lbs
nut on bolt thru bottom of coilover - 116 ft/lbs
nut holding speed sensor "cable" on 10 ft/lbs
nuts on top of coilover (3 off) 49 ft/lbs
Rear
nuts on top of coilover ( 3 off) 55 ft/lbs
2 x bolts holding shock to body 15 ft/lbs
coilover bottom bolt 81 ft/lbs
wheel hub bottom bolt 119 ft/lbs
height sensor bolt 20 f/lbs - Auta a dopravní prostředky
How would you rate these after living with them for a bit? I’ve had my ISF 6 months and the ride is getting very irritating now.
They are a vast improvement over the standard ones. If anything I think the springs could be a bit softer. Maybe the unadjustable street ones might be better as they have 7kg springs rather than 8kg. As they are I still would rather have these than the standard ones which are ridiculously stiff. Even with the softer setting it still corners like it is on rails
@@SNORKYMEDIA Many thanks! It’s purely a road car so even if the handling is technically “worse”, I’d much rather not have my teeth rattled out 😂