Today this board delivered to me. I am using 2.0 computer speakers with preamp Aux out point and 35watt 4ohm subwoofer from speaker out. Adapter of 12v and 1.5 amp Its working really good
sir, i m palash . i m regularly visit you site and video and also very happy with your product. now just request you can you make 5.1 decoder board so that we can used 2.1 to 5.1 amplifire
HI!! i`m about to buy one of these and have a question. Could you connect a microphone via AUX-IN and play bluetooth music simultaneously? I want to do some karaoke with this little device.
aap ka bana huya 5.1 board ka pre amp kab banaoge, Mujhe dono ek sath chahiye, + Smps matching power me, or ek active 3way Coossover chahiye, jo Bass, Mid, & Hi, ko,alag alag Ka sake,
brought it from your website for testing. it costs me 600/- the sound quality is not so good but loud enough. for the price its okay type but I would definitely not recommend it. The other version like XY - C50H with coil is much better which is not available in inkocen. Another thing, in Ohm calculation, lower is more power. For example 2ohm speaker is more powerful than 4ohm and 4ohm is more powerful than 8ohm. Then why you suggest 24volt with 8ohm and 16volt with 4ohm, please explain the reason.
The sound quality is awesome. What speakers are you using? I personally think it sounds better than the 3116 board. For ohm calculations, a 4ohm load will draw more power than an 8 ohm load like you said. The limitation is the little smd components and the chip, it’s not able to handle high power inputs, so to keep it from destroying itself, limit the power to 16v if using 4ohm load. Honestly, I’m using a 12v 1amp supply for my 4ohm speakers and it’s goes loud enough, sounds clean and clear and barely heats up. I might try and bump up the supply to 16v 3amps but no more than that. You really want to keep the heat down on these boards as the heat sink is tiny, it cannot dissipate a lot of heat. The best way to do it is to keep the voltage around 16v -18v but it still runs on 12v so that is the best option, it will not stress the chip and the circuit and it will last long time. All the best!
Sir mere pass F&D ka 2.1 Speakers he jisme Satellite spk: 16W×2, · Subwoofer: 30W he , sir iska pcb board jal gaya he. mujhe suggest kijiye ki kounsa pcb board use karu ki ye fir se working condition me ho jaye. pls reply.
Sir aapka video dekhkar buy Kiya aaj deliver hua but mai ise use nahi kar pa raha connected nahi ho rhaa hai ?? Kaise karu. 1 video banao connecting ke upar
5.1 channel ka amplifier 1999 rs ka hai ,uske liye digital to analogue converter amplifier kab ayega , Jo app ne kaha tha ki app ek ready kar rahe hai in house.
Ye boar kharab ho gai hai,12v ,1amp adaptor ko plug karne par good sound de raha tha,par ab board kharab ho gya hai, adaptor ko multimeter se check Kiya to wah 12v bta Raha par jaise hi board me plug karte to board me Bluetooth blink karta tha par ab nahi kar raha hai aur boar ka powe check karne par 0.14to 0.16 v bta Raha hai kya kare koi solution btae.
I have bought it from you almost 3 months ago and using it as my pc sound amplifier honestly it is working very good I am a very satisfied user of this product 👌👍 Very Good product Inkocean keep dooin good work and all the best for 2023
Mat lena bhai inka koi bhi product. Maine liya tha mere pass damange or fault product aya maine complete ki to mujhe bole ki return krva do ab 1month hogya hai koi action nahi liya na mera parcel return kiya plz ap mat fasna inka customer service bekar hai
Today this board delivered to me.
I am using 2.0 computer speakers with preamp Aux out point and 35watt 4ohm subwoofer from speaker out.
Adapter of 12v and 1.5 amp
Its working really good
Does it require a heatsink? as the bottom area gets heated pretty quickly below the IC
Bhot badhiya board he sabse jyada acha aux output badhiya he bhai sound quality 1No 👍👍
Nice i was looking something like this thank you sir
Thank sir aapne is par video banaya mein isko definately aapse baad mein purchase karunga . I like this board while considering price and features
sir, i m palash . i m regularly visit you site and video and also very happy with your product. now just request you can you make 5.1 decoder board so that we can used 2.1 to 5.1 amplifire
Bass output from aux output is very low any suggestions to improve it?
HI!! i`m about to buy one of these and have a question. Could you connect a microphone via AUX-IN and play bluetooth music simultaneously? I want to do some karaoke with this little device.
Thank you sir
Bhai aap apna speakers b dekhaya karo ....
good quality, i driving one month
Very good board ❤️👍👍
12v 5amp de sakte hai sir
Bhut khub
It's very cheap with better quality 👍
how much ampere can we give to this board?
Nice 😍
I agree with you
Good👍👍
aap ka bana huya 5.1 board ka pre amp kab banaoge, Mujhe dono ek sath chahiye, + Smps matching power me, or ek active 3way Coossover chahiye, jo Bass, Mid, & Hi, ko,alag alag Ka sake,
*PA3050D Is it better than TPA3116D2?*
brought it from your website for testing. it costs me 600/- the sound quality is not so good but loud enough. for the price its okay type but I would definitely not recommend it. The other version like XY - C50H with coil is much better which is not available in inkocen. Another thing, in Ohm calculation, lower is more power. For example 2ohm speaker is more powerful than 4ohm and 4ohm is more powerful than 8ohm. Then why you suggest 24volt with 8ohm and 16volt with 4ohm, please explain the reason.
The sound quality is awesome. What speakers are you using? I personally think it sounds better than the 3116 board.
For ohm calculations, a 4ohm load will draw more power than an 8 ohm load like you said.
The limitation is the little smd components and the chip, it’s not able to handle high power inputs, so to keep it from destroying itself, limit the power to 16v if using 4ohm load.
Honestly, I’m using a 12v 1amp supply for my 4ohm speakers and it’s goes loud enough, sounds clean and clear and barely heats up. I might try and bump up the supply to 16v 3amps but no more than that.
You really want to keep the heat down on these boards as the heat sink is tiny, it cannot dissipate a lot of heat. The best way to do it is to keep the voltage around 16v -18v but it still runs on 12v so that is the best option, it will not stress the chip and the circuit and it will last long time. All the best!
Sir please make a Bord 200w+200w with preamp
Show speaker movement and bass
Sir ye TRRS aux support krta hai ? Mic in k lea ?
Sir iss module pe 15 watt 8 ohm ke 4 speakers connect kr sakte hai kya ?
Next forward kase hota he sir
aap ka bana huya 5.1 board ka pre amp kab banaoge, Mujhe dono ek sath chahiye, + Smps matching power me,
🙏👌🙏👍
Bro my same bor volume full round no problem
hi ! how can i add a subwoofer? thank you
Hi sir, is this with remote control, how to switch FM to USB to 3.5mm Jack
Laptop charger se chala sakte kya
Song ko next kese karte he?
Bhai lekin isme battery kaise jode? Khali adaopter se chalane me maja nahi aayega please reply🌹
Kya ye bike ki batry se chalega
Or emse 4 nch ka ek sbubywoor chalega bolo
Mera Bala bord bohot hitt hota hain
12v 2ah adapter use krta hu😨😨😨😨😨
Tpa 60watt mono 32 pin tpa3118 se accha hai kya ye board...?
Sir mere pass F&D ka 2.1 Speakers he jisme Satellite spk: 16W×2, · Subwoofer: 30W he , sir iska pcb board jal gaya he. mujhe suggest kijiye ki kounsa pcb board use karu ki ye fir se working condition me ho jaye. pls reply.
Isme bass treble laga sakte hai
Fm radio bhi add kro
Ab class ic Hona chahie Iske andar
Input volt kitna dae nah hae 12v or 24volt only
Rms 30 watt max 210 watt kya chal payega
Sir aapka video dekhkar buy Kiya aaj deliver hua but mai ise use nahi kar pa raha connected nahi ho rhaa hai ?? Kaise karu. 1 video banao connecting ke upar
मेरे एम्प्ली में साउंड नहीं आरेही हैं क्या करे , सलूशन बताइए
Hello sir I am munesh upadhyay I am interested in tda 8954 mono board but it's not available any site plz help me
Can it drive 35 watt *2 subwoofer
Bluetooth usb card kaise connect Karen please Bata dijiye
Sir aap damage board Amazon main q veg te hen...or return v acept nhi karte hn
Please bring icepower amplifier board.
5.1 channel ka amplifier 1999 rs ka hai ,uske liye digital to analogue converter amplifier kab ayega , Jo app ne kaha tha ki app ek ready kar rahe hai in house.
Iske sath iska mini cabinet milega?
I Need digital board for Bose Acoustimass® 3 Series V speaker system. Its an passive subwoofer speaker system. 140w @ 6 ohms x 2 channel.
2.1 ke liye achha bord btaae...
Kya isame ham 35 watt ka subwoofer laga sakate hai
Sir iska Bluetooth version kya hai... please.. tell me sir
Sound kyu nehi aarahabhai
Ye boar kharab ho gai hai,12v ,1amp adaptor ko plug karne par good sound de raha tha,par ab board kharab ho gya hai, adaptor ko multimeter se check Kiya to wah 12v bta Raha par jaise hi board me plug karte to board me Bluetooth blink karta tha par ab nahi kar raha hai aur boar ka powe check karne par 0.14to 0.16 v bta Raha hai kya kare koi solution btae.
How to change mode
Kya ye 5 voltage mobile charger se chal skta h
20w+20w ka koi board bataiye please
Sir mere pash 300 hai
Kiya ye boeard car main chal sakta hea
I have bought it from you almost 3 months ago and using it as my pc sound amplifier honestly it is working very good I am a very satisfied user of this product 👌👍
Very Good product Inkocean keep dooin good work and all the best for 2023
Hi, this amp has voice (chinese) or tone prompts?
@@cornrecords I think it is tone prompt
Sir aap ka speaker dikhana please
Sir ye 599 Ru. Ka dikha Raha h Amazon pe
Bhai log iski kimat flicart par 599rupaya hai
sir i want it in pakistan
पॉवर Rms or pmpo?
A bord kaha milti sir adrace a kaisa adar sir
Order tracking id kb milegi
Mat lena bhai inka koi bhi product. Maine liya tha mere pass damange or fault product aya maine complete ki to mujhe bole ki return krva do ab 1month hogya hai koi action nahi liya na mera parcel return kiya plz ap mat fasna inka customer service bekar hai
Aap 3050d ic mill jayage aap k pass
Audio kam hi
Kisi ke comment ka reply Nahin Hai
2.0. Or 2.1, or 2.2 ?
2.0
@@unknownguy2829you mean 2 way?
yep, stereo
@@exislaamnowbeinganinsaanah3302 made a detail video on this czcams.com/video/L9B_4Vr4WoI/video.html